Libreoffice doesn't start after installation

daeron

daeron

Just did yet another build and libreoffice still core dumps.

libreoffice-3.6.5_2 9.1-STABLE (11/Feb/2013) i386

Also, libreoffice could not find the following files:
Code: 
/etc/libmap.conf
ooenv
javaPathHelper
/etc/libmap.conf
/usr/local/lib/libreoffice/program/libXinerama.so.1
but finds /usr/local/lib/libXinerama.so.1
/usr/local/lib/libreoffice/program/oosplashrc
nss_compat.so.1
nss_nis.so.1
nss_files.so.1
nss_dns.so.1
/usr/local/lib/libreoffice/program/../ure-link/lib/libreg.so
/usr/local/lib/libreoffice/program/../ure-link/lib/libstore.so
/usr/local/lib/libreoffice/program/../ure-link/lib/libuno_cppuhelpergcc3.so
/usr/local/lib/libreoffice/program/../ure-link/lib/libuno_cppu.so
/usr/local/lib/libreoffice/program/../ure-link/lib/libuno_sal.so
/usr/local/lib/libreoffice/program/services.rdb
/usr/local/lib/libreoffice/program/oovbaapi.rdb
/usr/local/lib/libreoffice/program/gconfbe
/usr/local/lib/libreoffice/program/desktopbe
/usr/local/lib/libreoffice/program/localebe
/usr/local/lib/libreoffice/program/ucpexpand
 
My case, not only LibreOffice but also Firefox 19.0,1 didn't start, regardless of compiler.
(I tried base gcc and base clang, stable/9 r246819 ATM)

Yesterday I noticed Florian's suggestion in freebsd-ports list and updated src, but it wasn't MFC'ed ATM (r247150), so I tried patching manually and updated world and kernel.

After that, rebuilding firefox using clang went OK, and runs gracefully.
Then, I tried for LibreOffice and everything goes fine for me, too!

Now, I found the fix is MFC'ed as r247156, so it would be worth trying.
Though I didn't try yet, it would be OK if r247155 and r247157 don't break things.

But I must note that I didn't tried building / running Firefox using base gcc after updating kernel and world.
 
Confirmed. Both libreoffice and the latest firefox update work when built on current 9-stable (23/Feb). But they both seg fault if built on a 9-stable from 11/Feb.

- BUT the components swriter scalc etc. don't work under it.
Their (?empty) windows display with the splash-screen in front of them, then you get a 68Meg soffice.bin.core

I've been using the Linux binary for the pass month.

Code: 
% /usr/local/lib/libreoffice/program/swriter
I18N: Operating system doesn't support locale "en_US"
% /usr/local/lib/libreoffice/program/sbase
I18N: Operating system doesn't support locale "en_US"
% /usr/local/lib/libreoffice/program/scalc
I18N: Operating system doesn't support locale "en_US"
% setenv LANG "en_US.UTF-8"
% /usr/local/lib/libreoffice/program/swriter
% /usr/local/lib/libreoffice/program/scalc
% /usr/local/lib/libreoffice/program/smath
% /usr/local/lib/libreoffice/program/spadmin
Bus error (core dumped)


I'll start a
Code: 
portupgrade -Rf editors/libreoffice
and see if that helps
 
daeron said:
- BUT the components swriter scalc etc. don't work under it.
Their (?empty) windows display with the splash-screen in front of them, then you get a 68Meg soffice.bin.core
Click to expand...

Strange. Each you mentioned runs fine for me, at least after running and quitting /usr/local/bin/libreoffice (installed as symlink to /usr/local/lib/libreoffice/program/soffice).

My case, LANG is ja_JP.UTF-8 (same as LC_ALL), i386.

daeron said:
I've been using the Linux binary for the pass month.
Click to expand...

Have you done something special to run Linux LibreOffice? (As there's nothing like linux-libreoffice in ports collection)

If so, possibly deinstalling everything installed by Linux version and reverting everything you did to run it helps, I hope.

daeron said:
I'll start a
Code: 
portupgrade -Rf editors/libreoffice
and see if that helps
Click to expand...

Hope it helps, as it will require long long time.
 
re: native 3.6.5_2
- the base libreoffice began working again after I deleted ~/.config/libreoffice/3
- but the swriter and other programs are still core dumping. They still core dump when both ~/.config/libreoffice/3 and ~/.config/libreoffice/4 are removed.



re: Linux
- I did a manual install of Libreoffice 4.0.0.3, runs perfectly. It's all installed under /compat/linux which is not in the path, and I've checked the user home directory to make sure nothing else references the /compat/linux directory (other than some KDE history records).
The user config is in ~/.config/libreoffice/4
 
Keep an eye to this PR. You can contribute by providing log GDB's outputs for help to maintainers (office team) to debug current problem reported.
 
One more information.

Additionally tried in old, more aged (experiencing major upgrading of base system) Thinkpad T61.
Building with stable/9 r247525, i386 and successfully installed.

Everything below starts gracefully for me.

Code: 
% /usr/local/lib/libreoffice/program/swriter
% /usr/local/lib/libreoffice/program/scalc
% /usr/local/lib/libreoffice/program/smath
% /usr/local/lib/libreoffice/program/sdraw
% /usr/local/lib/libreoffice/program/simpress
% /usr/local/lib/libreoffice/program/sbase
% /usr/local/lib/libreoffice/program/spadmin

Also, starting above via soffice goes OK.

Basically my locale settings are LC_ALL=ja_JP.UTF-8, LANG=ja_JP.UTF-8, LC_MESSAGES=ja_JP.UTF-8, but trying below went fine.

Code: 
% env LANG=en_US.UTF-8 /usr/local/lib/libreoffice/program/swriter

Maybe because I installed japanese/libreoffice, all menus were displayed in Japanese, even if LANG=en_US.UTF-8.
 
You must log in or register to reply here.
Back
Top