---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE DOCKSTAR arm
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
CPU: Feroceon 88FR131 rev 1 (**unknown 4** core)
Little-endian DC enabled IC enabled WA disabled DC streaming enabled
BTB disabled L2 enabled L2 prefetch enabled
WB enabled LABT branch prediction enabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 0 (0 MB)
avail memory = 120799232 (115 MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
localbus0: <Marvell device bus> on ofwbus0
ic0: <Marvell Integrated Interrupt Controller> mem 0x20200-0x2023b on simplebus0
timer0: <Marvell CPU Timer> mem 0x20300-0x2032f irq 1 on simplebus0
Event timer "CPUTimer0" frequency 200000000 Hz quality 1000
Timecounter "CPUTimer1" frequency 200000000 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq 35,36,37,38,39,40,41 on simplebus0
gpio0: ERROR: no pin-count or ngpios entry found!
device_attach: gpio0 attach returned 6
rtc0: <Marvell Integrated RTC> mem 0x10300-0x10307 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 43 on simplebus0
iicbus0: <OFW I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
mge0: <Marvell Gigabit Ethernet controller> mem 0x72000-0x73fff irq 12,13,14,11,46 on simplebus0
mge0: PHY0 attached, phy_sc points to mge0
mge0: Ethernet address: 00:10:75:28:cc:00
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1116R Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
uart0: <16550 or compatible> mem 0x12000-0x1201f irq 33 on simplebus0
uart0: console (1056,n,8,1)
uart1: <16550 or compatible> mem 0x12100-0x1211f irq 34 on simplebus0
cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x30000-0x30fff,0x3d000-0x3dfff irq 22 on simplebus0
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x50000-0x50fff irq 48,19 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from ufs:/dev/da0s2 [rw]...
Root mount waiting for: usbus0
ugen0.1: <Marvell EHCI root HUB> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.2: <Kingston DataTraveler 3.0> at usbus0
umass0 on uhub0
umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.10, addr 2> on usbus0
mountroot: waiting for device /dev/da0s2...
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 94DE80724795B2809941CD07
da0: 40.000MB/s transfers
da0: 14784MB (30277632 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
random: unblocking device.
lo0: link state changed to UP
interrupt storm detected on "intr12:"; throttling interrupt source
interrupt storm detected on "intr13:"; throttling interrupt source
mge0: link state changed to UP
interrupt storm detected on "intr12:"; throttling interrupt source
interrupt storm detected on "intr13:"; throttling interrupt source
interrupt storm detected on "intr12:"; throttling interrupt source
...
...