installing KDE

hirohitosan

hirohitosan

I'm trying to install KDE. After a few hours I get :

Code: 
===>   akonadi-1.2.1 depends on file: /usr/local/bin/mysqld_safe - not found
===>    Verifying install for /usr/local/bin/mysqld_safe in /usr/ports/databases/mysql50-server
===>  Vulnerability check disabled, database not found

You may use the following build options:

        WITH_CHARSET=charset    Define the primary built-in charset (latin1).
        WITH_XCHARSET=list      Define other built-in charsets (may be 'all').
        WITH_COLLATION=collate  Define default collation (latin1_swedish_ci).
        WITH_OPENSSL=yes        Enable secure connections.
        WITH_LINUXTHREADS=yes   Use the linuxthreads pthread library.
        WITH_PROC_SCOPE_PTH=yes Use process scope threads
                                (try it if you use libpthread).
        BUILD_OPTIMIZED=yes     Enable compiler optimizations
                                (use it if you need speed).
        BUILD_STATIC=yes        Build a static version of mysqld.
                                (use it if you need even more speed).
        WITHOUT_THR_ALARM=yes   Disable signals (this reduces kernel lock
                                contention on SMP, but has the side effect
                                that you can't kill clients that are sleeping).
        WITHOUT_INNODB=yes      Disable support for InnoDB table handler.
        WITH_ARCHIVE=yes        Enable support for Archive Storage Engine.
        WITH_CSV=yes            Enable support for CSV Storage Engine.
        WITH_FEDERATED=yes      Enable support for Federated Storage Engine.
        WITH_NDB=yes            Enable support for NDB Cluster.

===>  Extracting for mysql-server-5.0.87
=> MD5 Checksum mismatch for mysql-5.0.87.tar.gz.
=> SHA256 Checksum mismatch for mysql-5.0.87.tar.gz.
===>  Refetch for 1 more times files: mysql-5.0.87.tar.gz mysql-5.0.87.tar.gz 
===>  Vulnerability check disabled, database not found

You may use the following build options:

        WITH_CHARSET=charset    Define the primary built-in charset (latin1).
        WITH_XCHARSET=list      Define other built-in charsets (may be 'all').
        WITH_COLLATION=collate  Define default collation (latin1_swedish_ci).
        WITH_OPENSSL=yes        Enable secure connections.
        WITH_LINUXTHREADS=yes   Use the linuxthreads pthread library.
        WITH_PROC_SCOPE_PTH=yes Use process scope threads
                                (try it if you use libpthread).
        BUILD_OPTIMIZED=yes     Enable compiler optimizations
                                (use it if you need speed).
        BUILD_STATIC=yes        Build a static version of mysqld.
                                (use it if you need even more speed).
        WITHOUT_THR_ALARM=yes   Disable signals (this reduces kernel lock
                                contention on SMP, but has the side effect
                                that you can't kill clients that are sleeping).
        WITHOUT_INNODB=yes      Disable support for InnoDB table handler.
        WITH_ARCHIVE=yes        Enable support for Archive Storage Engine.
        WITH_CSV=yes            Enable support for CSV Storage Engine.
        WITH_FEDERATED=yes      Enable support for Federated Storage Engine.
        WITH_NDB=yes            Enable support for NDB Cluster.

=> mysql-5.0.87.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
=> Attempting to fetch from ftp://ftp.fi.muni.cz/pub/mysql/Downloads/MySQL-5.0/.
===>  Vulnerability check disabled, database not found

You may use the following build options:

        WITH_CHARSET=charset    Define the primary built-in charset (latin1).
        WITH_XCHARSET=list      Define other built-in charsets (may be 'all').
        WITH_COLLATION=collate  Define default collation (latin1_swedish_ci).
        WITH_OPENSSL=yes        Enable secure connections.
        WITH_LINUXTHREADS=yes   Use the linuxthreads pthread library.
        WITH_PROC_SCOPE_PTH=yes Use process scope threads
                                (try it if you use libpthread).
        BUILD_OPTIMIZED=yes     Enable compiler optimizations
                                (use it if you need speed).
        BUILD_STATIC=yes        Build a static version of mysqld.
                                (use it if you need even more speed).
        WITHOUT_THR_ALARM=yes   Disable signals (this reduces kernel lock
                                contention on SMP, but has the side effect
                                that you can't kill clients that are sleeping).
        WITHOUT_INNODB=yes      Disable support for InnoDB table handler.
        WITH_ARCHIVE=yes        Enable support for Archive Storage Engine.
        WITH_CSV=yes            Enable support for CSV Storage Engine.
        WITH_FEDERATED=yes      Enable support for Federated Storage Engine.
        WITH_NDB=yes            Enable support for NDB Cluster.

=> MD5 Checksum mismatch for mysql-5.0.87.tar.gz.
=> SHA256 Checksum mismatch for mysql-5.0.87.tar.gz.
===>  Giving up on fetching files: mysql-5.0.87.tar.gz mysql-5.0.87.tar.gz 
Make sure the Makefile and distinfo file (/usr/ports/databases/mysql50-server/distinfo)
are up to date.  If you are absolutely sure you want to override this
check, type "make NO_CHECKSUM=yes [other args]".
*** Error code 1

Stop in /usr/ports/databases/mysql50-server.
*** Error code 1

Stop in /usr/ports/databases/mysql50-server.
*** Error code 1

Stop in /usr/ports/databases/akonadi.
*** Error code 1

Stop in /usr/ports/deskutils/kdepimlibs4.
*** Error code 1

Stop in /usr/ports/x11/kdebase4-runtime.
*** Error code 1

Stop in /usr/ports/x11/kdebase4-runtime.
*** Error code 1

Stop in /usr/ports/x11/kde4.
*** Error code 1

Stop in /usr/ports/x11/kde4.
I think it's a problem with MySQL server. How can I continue?

thanks
 
I did # portsnap fetch update and then
Code: 
portmaster -a
===>>> Gathering distinfo list for installed ports

===>>> Starting check of installed ports for available updates
===>>> Checking ports for recursive 'make config'

===>>> Is /usr/ports/devel/libtool15/Makefile missing?
===>>> Aborting update

Terminated
Terminated
I don't understand the message. Can someone explain?
thanks!
 
to solve the checksum mismatch problem you should probably delete /usr/ports/distfiles/mysql-5.0.87.tar.gz (usually, this happens when the file was only partially downloaded)

the last error you wrote about is probably caused by a bad update of the ports tree... play again with portsnap (i don't know what you should do since i don't use it) to get a working tree (in the worst case, get a fresh tree)
 
thanks xzhayon!
I deleted the /usr/ports and after I did:
Code: 
# portsnap fetch
# portsnap extract
# portmaster -a
after that again
Code: 
# cd /usr/ports/x11/kde4
# make install clean
and I got
Code: 
....
=> Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/KDE/.
fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/KDE/oxygen-icons-4.3.1.tar.bz2: size mismatch: expected 115327590, actual 0
=> Couldn't fetch it - please try to retrieve this
=> port manually into /usr/ports/distfiles/KDE and try again.
*** Error code 1

Stop in /usr/ports/x11-themes/kde4-icons-oxygen.
*** Error code 1

Stop in /usr/ports/x11-themes/kde4-icons-oxygen.
*** Error code 1

Stop in /usr/ports/x11/kdebase4-workspace.
*** Error code 1

Stop in /usr/ports/x11/kdebase4.
*** Error code 1

Stop in /usr/ports/x11/kde4.
*** Error code 1

Stop in /usr/ports/x11/kde4.
how can I continue? how can I "retrieve this
=> port manually into /usr/ports/distfiles/KDE and try again"?
thanks
 
i can fetch that file without any problem. did you try to # fetch [url]ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/KDE/oxygen-icons-4.3.1.tar.bz2[/url]? if you manage to download it, move it to the directory you're asked to. if not... come back and tell me :p
 
Code: 
=> Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/KDE/.
fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/KDE/oxygen-icons-4.3.1.tar.bz2: size mismatch: expected 115327590, actual 0
The oxygen-icons-4.3.1.tar.bz2 looks like it's corrupt. Remove it from distfiles/KDE and try again. If it keeps getting 0 bytes try a different mirror.
 
thanks guys
I downloaded manually oxygen-icons-4.3.1.tar.bz2, and continue to install KDE. The problem is that after a while the installation process stops.
For example now the installation is stopped at:
Code: 
Generating kpilotlocallink.moc
[ 1%] Built target kpilot_automoc
and nothing happens.
When something similar happened before I restarted the computer and start "make install clean" again.

What can I do?
There is no error message or something and also no sign of any activity at all

thanks
 
uhhh, why won't people run # make [b]clean[/b] instal clean on dirty directories?
Why do you think it stopped?
I see no error indicating anything.....

How long it was like that?
 
killasmurf86 said:
uhhh, why won't people run # make [b]clean[/b] instal clean on dirty directories?
Click to expand...
it was written in documentation #make install clean

killasmurf86 said:
Why do you think it stopped?
I see no error indicating anything.....
Click to expand...
No, like I told you there is no message, just stop at this stage

killasmurf86 said:
How long it was like that?
Click to expand...
now is 3 hours since that message appears. Nothing happen. No error message or something.

what can I do now?
 
Did you try to clean it?
make clean and then try to install it, or even better
Code: 
# cd /usr/ports/x11-themes/kde4-icons-oxygen
# make clean install clean


Have you custumized anything in /etc/make.conf, if so, please show us /etc/make.conf
 
killasmurf86 said:
Have you custumized anything in /etc/make.conf, if so, please show us /etc/make.conf
Click to expand...

No I didn't customized anything. Now I did
Code: 
#cd /usr/ports/x11/kde4
# make clean install clean
It starts cleaning and now is continuing to install

Hope will reach the end

thanks for now! I'll tell you about results
 
you should first cd to /usr/ports/x11-themes/kde4-icons-oxygen
and try to install it first, because last time installation sopped there.
this might repeat.
Now if you install kde4-icons-oxygen first and then go to kde4, kde4 won't stop at kde4-icons-oxygen again :) and you'll save time

If it's successful, then cd to kde4 and # make clean install clean

Actually I'd recommend installing ports-mgmt/portmaster
It'll do many thing for you :)
(including cleaning directories, when necessary before building something
 
You must log in or register to reply here.
Back
Top