ILO install error from FreeBSD 8.x ISO

ShyRain

ShyRain

Hi,

I am trying to install FreeBSD 8.x on a remote computer with ILO. I tried to install RedHat 6.3, and it was done without any problem. Then I try to install FreeBSD, I get an error, I search on Google, everybody writes "clean your DVD/CD" or "re-burn in slow mode" BUT I am using an ISO, not CD or DVD. Please show me how I can install any FreeBSD 8.x version on this HP server. In addition, I installed this ISO before from the physical server's DVD-ROM.

20130905_162845_zpsea040c19.jpg


20130905_161650_zps8fceb2b0.jpg


20130905_161619_zps785b04ae.jpg


20130905_161553_zps97c9b2a3.jpg
 
It looks like you're installing PC-BSD, not FreeBSD.

[thread=7290]PC-BSD DesktopBSD FreeNAS NAS4Free m0N0WALL pfSense ArchBSD kFreeBSD JabirOS topics[/thread]
 
SirDice said:
It looks like you're installing PC-BSD, not FreeBSD.

[thread=7290]PC-BSD DesktopBSD FreeNAS NAS4Free m0N0WALL pfSense ArchBSD kFreeBSD JabirOS topics[/thread]
Click to expand...

I tried many FreeBSD ISOs such as disk1, dvd1, bootonly, memstick and PC-BSD. Everything had the same result so I attached only screenshots of the last try. You are also right: this example screenshot is from PC-BSD but FreeBSD 8.x gives me the same result. If you want I can change the screenshots with others.
 
No, that's fine. Could you please give 9.1 or the latest candidate for 9.2 a try?
 
Same system, same ILO, everything is the same only I changed the ISO. This is FreeBSD-9.2-RC3-amd64-dvd1.iso.

20130906_094841_zps05dfe384.jpg
 
See how that USB message appeared after the mountroot prompt? Some USB devices take a while to appear. Wait ten seconds (or enter a dot a few times, I can't recall whether that's necessary), then enter cd9660:/dev/iso9660/FREEBSD_INSTALL again.
 
I'm still trying to install FreeBSD with HP ILO. I got an error log and saw some errors but again I didn't find any solution.

Code: 
Root mount waiting for: usbus2                                                  
ugen2.3: <HP> at usbus2                                                         
umass0: <HP iLO Virtual USB CDDVD ROM, class 0/0, rev 2.00/0.01, addr 3> on usbus2
                                                                              
umass0:  8070i (ATAPI) over Bulk-Only; quirks = 0x0100                          
umass0:3:0:-1: Attached to scbus3                                               
cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0                                   
cd0: <HP Virtual DVD-ROM \0000.0> Removable CD-ROM SCSI-0 device                
cd0: 40.000MB/s transfers                                                       
cd0: cd present [831742 x 2048 byte records]                                    
[B](cd0:umass-sim0:0:0:0): AutoSense failed [/B]                                       
ugen2.4: <vendor 0x0424> at usbus2                                              
uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 4> on usbus2                                                                               
uhub5: 2 ports with 1 removable, self powered                                   
Trying to mount root from ufs:/dev/ufs/ROOTFS                                                                                                                                                                Sleeping 10 seconds to let devices settle                                                                                                                       
uhub5: 2 ports with 1 removable, self powered                                   

Trying to mount root from ufs:/dev/ufsROOTFS 
                                                                                                                                                                                                  Sleeping 10 seconds to let devices settle
Checking for install image on: /dev/acd0
                                        
[B]g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5 [/B]     
               
Unable to mount: /dev/acd0                                                      
Checking for install image on: /dev/cd0                                         
SMP: AP CPU #26 Launched!  
Root mount waiting for: usbus2 
ugen2.3: <HP> at usbus2
umass0: <HP iLO Virtual USB CDDVD ROM, class 0/0, rev 2.00/0.01, addr 3> on usbus2
umass0:  8070i (ATAPI) over Bulk-Only; quirks = 0x0100                          
umass0:3:0:-1: Attached to scbus3                                               
cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0                                   
cd0: <HP Virtual DVD-ROM \0000.0> Removable CD-ROM SCSI-0 device                
cd0: 40.000MB/s transfers                                                       
cd0: cd present [831742 x 2048 byte records]                                    
(cd0:umass-sim0:0:0:0): AutoSense failed                                        
ugen2.4: <vendor 0x0424> at usbus2                                              
uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 4> on usbus2                                                                               
Unable to mount: /dev/da0                                                       
Unable to mount: /dev/da0s1b
                                                                                                                                    WARNING: / was not properly dismounted
Checking for install image on: /dev/da0s1b                                      
Unable to mount: /dev/da0s1b                                                    
Checking for install image on: /dev/da0s1d                                      
WARNING: /var was not properly dismounted                                       
Checking for install image on: /dev/da0s1e                                      
WARNING: /tmp was not properly dismounted                                       
Checking for install image on: /dev/da0s1f                                      
WARNING: /usr was not properly dismounted                                       
Checking for msdosfs install image on: /dev/da0                                 
Checking for msdosfs install image on: /dev/da0s1                               
Unable to mount: /dev/da0s1                                                     
Checking for msdosfs install image on: /dev/da0s1a                              
Unable to mount: /dev/da0s1a                                                   
Checking for msdosfs install image on: /dev/da0s1b                              
Checking for msdosfs install image on: /dev/da0s1d                              
Unable to mount: /dev/da0s1d                                                    
Checking for msdosfs install image on: /dev/da0s1e                              
Unable to mount: /dev/da0s1e                                                    
Checking for msdosfs install image on: /dev/da0s1f                              
Unable to mount: /dev/da0s1f                                                    
Checking for install image on: /dev/cd0                                         
Checking for install image on: /dev/cd2                                         
Unable to mount: /dev/cd2                                                       
Checking for install image on: /dev/cd3                                         
Unable to mount: /dev/cd3                                                       
Checking for install image on: /dev/acd0                                        
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5                     
Unable to mount: /dev/acd0                                                      
Checking for install image on: /dev/acd1                                        
Unable to mount: /dev/acd1                                                      
Checking for install image on: /dev/acd2                                        
Unable to mount: /dev/acd2                                                      
Checking for install image on: /dev/acd3                                        
Unable to mount: /dev/acd3                                                      
Error mounting install image!!!                                                 
Please report this problem to PC-BSD support!                                   
Available devices are acd0                                                      
cd0 : da0                                                                       da0s1                                                                           da0s1a                                                                          da0s1b                                                                          da0s1d                                                                          da0s1e                                                                          da0s1f                                                                          
Press ENTER to drop to shell. When finished, type in 'exit' to reboot.          
Unable to mount: /dev/cd2                                                       
Checking for install image on: /dev/cd3                                         
Unable to mount: /dev/cd3                                                       
Checking for install image on: /dev/acd0                                        
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5                     
Unable to mount: /dev/acd0                                                      
Checking for install image on: /dev/acd1                                        
Unable to mount: /dev/acd1                                                      
Checking for install image on: /dev/acd2                                        
Unable to mount: /dev/acd2                                                      
Checking for install image on: /dev/acd3                                        
Unable to mount: /dev/acd3                                                      
Error mounting install image!!!                                                 
Please report this problem to PC-BSD support!                                   
Available devices are acd0                                                      
cd0 : da0                                                                       da0s1                                                                           da0s1a                                                                          da0s1b                                                                          da0s1d                                                                          da0s1e                                                                          da0s1f                                                                          
Press ENTER to drop to shell. When finished, type in 'exit' to reboot.
 
I deleted the RAID system on the server and I did RAID 5. I escaped to the loader prompt, then loaded the HP p410i array controller card driver ciss. Then I tried FreeBSD-8.3-RELEASE-amd64-memstick.img and it installed without any problem. Then I tried FreeBSD 8.4 amd64, for the first time and it installed. This so surprised me; then I tried my special ISO, and it didn't install again. Then I formatted this server and tried again FreeBSD 8.4, but it didn't install and gave interesting errors. It didn't see the CD-ROM.

I googled it and remembered the sysinstall > options > re-scan option. I tried but I got again some error message. I rebooted it and I escaped to the loader prompt and
Code: 
OK load ciss 
OK loaded /boot/kernel/ciss.ko driver....
OK %100
OK load cd9660
OK load cam
OK load cd
OK loaded /boot/kernel/cd.ko driver....
OK %100

This time it saw the CD-ROM, but I got an error:

Code: 
Error mounting /dev/cd0 on /dist: Device not configured (6)

Code: 
Unable to initialize selected media, Would you like to adjust your media configuration and try again?

Have you got any idea?
 
You must log in or register to reply here.
Back
Top