Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk2p1:
FreeBSD/arm EFI loader, Revision 1.1
Command line arguments: l
Image base: 0x8d417000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8225.1792)
Console: comconsole (0)
Load Path: /efi\boot\bootarm.efi
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Sata(0x0,0xffff,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Sata(0x0,0xffff,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Setting currdev to disk2p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Sata(0x0,0xffff,0x0)/HD(2,0x01,0,0x197c7,0x1dba8e9)
Setting currdev to disk2p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0x1b4 text=0x6f2fe4 text=0x1831dc data=0xb00b0 data=0x0+0x1e8000 syms=[0x4+0x9e880+0x4+0x1100f4]
Loading configured modules...
/etc/hostid size=0x25
/boot/kernel/umodem.ko text=0x1540 text=0xf20 data=0x234+0x4 syms=[0x4+0xe70+0x4+0xa74]
loading required module 'ucom'
/boot/kernel/ucom.ko text=0x1714 text=0x2c7c data=0x484+0x838 syms=[0x4+0x13e0+0x4+0xbac]
/boot/entropy size=0x1000
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x17f00000.
Kernel entry at 0x87600200...
Kernel args: (null)
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 06:33:09 UTC 2021
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT: init without driver.
No PSCI/SMCCC call function found
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions:
UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 2130145280 (2031 MB)
avail memory = 2071646208 (1975 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
ofwbus0: <Open Firmware Device Tree>
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofw_clkbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 47,48,49 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
regfix7: <Fixed Regulator> on ofwbus0
regfix8: <Fixed Regulator> on ofwbus0
regfix9: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x20cc000-0x20cffff on simplebus1
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 45,46 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 11 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 160
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on simplebus1
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on simplebus1
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on simplebus1
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on simplebus1
gpiobus3: <OFW GPIO bus> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on simplebus1
gpiobus4: <OFW GPIO bus> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on simplebus1
gpiobus5: <OFW GPIO bus> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on simplebus1
gpiobus6: <OFW GPIO bus> on gpio6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff irq 60 on simplebus1
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on simplebus1
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 10 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
pmu0: <Performance Monitoring Unit> irq 1 on ofwbus0
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 7 on simplebus0
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
pcm0: <i.MX6 Synchronous Serial Interface (SSI)> mem 0x2028000-0x202bfff irq 68 on simplebus2
pcm0: ssimixer_set() 75 75
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
gpioc5: <GPIO controller> on gpio5
gpioc6: <GPIO controller> on gpio6
snvs0: <i.MX6 SNVS RTC> mem 0x20cc000-0x20cffff irq 99,100 on simple_mfd0
snvs0: registered as a time-of-day clock, resolution 0.000030s
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: d2:a7:fd:f7:ea:d0
sdhci_fsl0: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
mmc0: <MMC/SD bus> on sdhci_fsl0
sdhci_fsl1: <Freescale uSDHC controller> mem 0x2198000-0x219bfff irq 84 on simplebus3
mmc1: <MMC/SD bus> on sdhci_fsl1
imx_i2c0: <Freescale i.MX I2C> mem 0x21a0000-0x21a3fff irq 86 on simplebus3
imx_i2c1: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
imx_i2c2: <Freescale i.MX I2C> mem 0x21a8000-0x21abfff irq 88 on simplebus3
audmux0: <i.MX6 Digital Audio Multiplexer> mem 0x21d8000-0x21dbfff on simplebus3
uart1: <Freescale i.MX UART> mem 0x21ec000-0x21effff irq 96 on simplebus3
uart2: <Freescale i.MX UART> mem 0x21f0000-0x21f3fff irq 97 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 13,14 on simplebus0
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 15 on simplebus0
ahci0: AHCI v1.30 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 4GB <SDHC SD04G 3.0 SN 6D542913 MFG 12/2013 by 39 PH> at mmc0 50.0MHz/4bit/65535-block
mmcsd1: 8GB <MMCHC 8GTF4R 0.6 SN 2950F48F MFG 01/2018 by 21 0x0000> at mmc1 50.0MHz/8bit/65535-block
mmcsd1boot0: 4MB partition 1 at mmcsd1
mmcsd1boot1: 4MB partition 2 at mmcsd1
mmcsd1rpmb: 524kB partition 3 at mmcsd1
iicbus0: <OFW I2C bus> on imx_i2c0
iic0: <I2C generic I/O> on iicbus0
nxprtc0: <NXP PCF8523 RTC> at addr 0xd0 on iicbus0
iicbus0: <unknown card> at addr 0x14
iicbus1: <OFW I2C bus> on imx_i2c1
iic1: <I2C generic I/O> on iicbus1
hdmi0: HDMI controller 13:0a:a0:c1
iicbus2: <OFW I2C bus> on imx_i2c2
iic2: <I2C generic I/O> on iicbus2
nxprtc0: WARNING: RTC battery failed; time is invalid
nxprtc0: registered as a time-of-day clock, resolution 0.015625s
Release APs
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SSD U110 16GB U21B001> ACS-2 ATA SATA 3.x device
ada0: Serial Number 153303400094
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 3 Fifo
mmcsd0: Error indicated: 3 Fifo
mmcsd0: Error indicated: 3 Fifo
mmcsd0: Error indicated: 3 Fifo
nxprtc0: RTC clock not running
Warning: bad time from time-of-day clock, system time will not be set accurately
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 3271740 free (196 frags, 408943 blocks, 0.0% fragmentation)
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
Setting hostuuid: f9eb306c-9901-11eb-bc5e-db838861316e.
Setting hostid: 0xdd134f92.
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
Soft Float compatibility ldconfig path:
Setting hostname: generic.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub2: MTT enabled
.
pcm0: ssimixer_set() 75 75
Autoloading module: imx_spi.ko
imx_spi0: <i.MX ECSPI Master> mem 0x200c000-0x200ffff irq 63 on simplebus2
spibus0: <OFW SPI bus> on imx_spi0
lo0: link state changed to UP
uhub2: 4 ports with 3 removable, self powered
ffec0: link state changed to DOWN
Starting Network: lo0 ffec0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ffec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether d2:a7:fd:f7:ea:d0
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
ffec0: link state changed to UP
Autoloading module: imx_spi.ko