Hi, i have an HP Proliant DL160 G5 with two hot-plug SATA disks on
hot-plug LSI raid controller.
I have tried 7.0,7.2 and 8.0 install CDs.
It stops at:
With ACPI disabled:
I have tried to install Debian 4.0r3 withou any problems.
BIOS is upgraded..
When i removed the LSI HBA controller, the boot process has been
completed and sysinstall was started.
So it look like an LSI HBA issue. I have LSI HBA 1064E.
Any suggestions?
hot-plug LSI raid controller.
I have tried 7.0,7.2 and 8.0 install CDs.
It stops at:
Code:
acpi_button0: <Power Button> on acpi0
With ACPI disabled:
Code:
p4tcc0: <CPU Frequency Thermal Control> on cpu0
I have tried to install Debian 4.0r3 withou any problems.
BIOS is upgraded..
When i removed the LSI HBA controller, the boot process has been
completed and sysinstall was started.
So it look like an LSI HBA issue. I have LSI HBA 1064E.
Any suggestions?