I'm trying to enable a PCI adapter with an NVME SSD installed to use as a log file but cannot find anything on how to enable this device.
[lanin@freebsd ~]$ dmesg |grep SSD
nvd0: <INTEL SSDPEL1K100GA> NVMe namespace
[lanin@freebsd ~]$ pciconf -vl | grep -B2 NVMe
nvme0@pci0:7:0:0: class=0x010802 rev=0x00 hdr=0x00 vendor=0x8086 device=0x2701 subvendor=0x8086 subdevice=0x3907
vendor = 'Intel Corporation'
device = 'NVMe Datacenter SSD [Optane]'
[lanin@freebsd ~]$ ls /dev/nvme*
/dev/nvme0 /dev/nvme0ns1
[lanin@freebsd ~]$ gpart list nvd0
Geom name: nvd0
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 195371534
first: 34
entries: 128
scheme: GPT
Providers:
1. Name: nvd0p1
Mediasize: 49999249408 (47G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 1048576
Mode: r0w0e0
efimedia: HD(1,GPT,267c5d90-e450-41d9-8f04-9ec934a1ac63,0x800,0x5d21800)
rawuuid: 267c5d90-e450-41d9-8f04-9ec934a1ac63
rawtype: 0657fd6d-a4ab-43c4-84e5-0933c84b4f4f
label: (null)
length: 49999249408
offset: 1048576
type: linux-swap
index: 1
end: 97656831
start: 2048
Consumers:
1. Name: nvd0
Mediasize: 100030242816 (93G)
Sectorsize: 512
Mode: r0w0e0
No I don't think that at all. We have showed the original poster just about every factoid about NVMe we can muster.In that context my post looks stupid. Sorry about that.
NVME is not an option at this point.
Do you mean nvme devices are not supported on freebsd?
Mind blown.Usegeom -t
to list them out before
Hi, sorry for not getting back to this. I didn't get any notifications of replies.
# ls /dev/nvme*
ls: /dev/nvme*: No such file or directory
# ls /dev/nd*
ls: /dev/nd*: No such file or directory
# dmesg |grep SSD
#
# pciconf -vl | grep -B2 NVMe
#
# gpart list nvd0
gpart: Class 'PART' does not have an instance named 'nvd0'.
# geom -t
Geom Class Provider
da0 DISK da0
da0 DEV
da0 PART da0p1
da0p1 DEV
da0p1 LABEL gpt/gptboot0
gpt/gptboot0 DEV
da0 PART da0p2
da0p2 DEV
swap SWAP
da0 PART da0p3
da0p3 DEV
zfs::vdev ZFS::VDEV
da1 DISK da1
da1 DEV
da1 PART da1p1
da1p1 DEV
da1p1 LABEL gpt/gptboot1
gpt/gptboot1 DEV
da1 PART da1p2
da1p2 DEV
swap SWAP
da1 PART da1p3
da1p3 DEV
zfs::vdev ZFS::VDEV
# pciconf -lv
… all it needed was a slot swap. …
man geom
pulls up 8 by default …