Hello,
I'm running FreeBSD 9.3-RELEASE up-to-date, on two HP Proliant G6 server blades in the same enclosure. One with VLANs in the uplink, the other without VLANs.
Blade A is configured to access the network through a connection without VLANs (the link provided by Network team comes with no VLAN tagging). Its transfer rate is perfect, both up and down.
Blade A network configuration:
Blade B is configured to access the network through a link sporting multiple VLANs, so I've created a network interface that uses one of these VLANs. Ping is OK, I can
Blade B network configuration:
Any idea?
I'm running FreeBSD 9.3-RELEASE up-to-date, on two HP Proliant G6 server blades in the same enclosure. One with VLANs in the uplink, the other without VLANs.
Blade A is configured to access the network through a connection without VLANs (the link provided by Network team comes with no VLAN tagging). Its transfer rate is perfect, both up and down.
Blade A network configuration:
Code:
ifconfig_bxe0="inet x.y.z.141/24"
defaultrouter="x.y.z.1"
Code:
# ifconfig bxe0
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
ether 00:17:a4:77:04:00
inet x.y.z.141 netmask 0xffffff00 broadcast x.y.z.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-CX4 <full-duplex>)
status: active
Blade B is configured to access the network through a link sporting multiple VLANs, so I've created a network interface that uses one of these VLANs. Ping is OK, I can
ssh
to this server, transfer rate to the server (down) is not fantastic but OK, enough to perform pkg installation or FreeBSD update. Transfer rate from the server to the rest of the world is abysmal, often stalling after few 100's KB.Blade B network configuration:
Code:
ifconfig_bxe0="UP"
vlans_bxe0="161"
ifconfig_bxe0_161="inet x.y.z.142/24"
defaultrouter="x.y.z.1"
Code:
# ifconfig bxe0
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
ether 00:17:a4:77:04:10
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-CX4 <full-duplex>)
status: active
Code:
# ifconfig bxe0.161
bxe0.161: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 00:17:a4:77:04:10
inet x.y.z.142 netmask 0xffffff00 broadcast x.y.z.255
inet6 fe80::217:a4ff:fe77:410%bxe0.161 prefixlen 64 scopeid 0x10
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-CX4 <full-duplex>)
status: active
vlan: 161 parent interface: bxe0
Any idea?