Hi!
Third day try to setup NVidia under FreeBSD on my laptop Acer AS3750G.
System - FreeBSD 9.0-RELEASE 86_64 with GENERIC kernel.
Two videocards:
xorg bilded and installed with vesa and nv support.
With vesa driver - no problems, everything works, but resolution in KDE only 1024 I need more - 1280.
So, first I tried nv driver.
Here is xorg.conf for nv: http://rtfm.co.ua/uploads/xorg.conf.nv
After startx I got:
Log is here: http://rtfm.co.ua/uploads/Xorg.0.log.nv
From log I see, that nv driver from x11/nvidia-driver doesn't support my GT 520M card.
OK, next I tried driver from official website NVidia here: http://www.nvidia.com/object/unix.html
After setup 302.17 version and startx - system going to reboot immediately, so I'll not show log of it.
Trying to setup 295.59. Videocard pretend in support devices list.
Make nvidia-xconfig - xorg.conf rewriting to new one, here it is: http://rtfm.co.ua/uploads/xorg.conf.nvidia
After startx I again got:
Here is log: http://rtfm.co.ua/uploads/Xorg.0.log.nvidia
Main from log:
Setup and install xorg and NVidia drivers was without any mistakes.
nvidia module booted:
Present in autoboot:
procfs mounted:
My dmesg: http://rtfm.co.ua/uploads/dmesg.txt
Unfortunately in my BIOS missing option to disable one from videocards.
Can somebody please explain me - what I doing wrong?
P.S. sorry for my English, greetings from Ukraine
Third day try to setup NVidia under FreeBSD on my laptop Acer AS3750G.
System - FreeBSD 9.0-RELEASE 86_64 with GENERIC kernel.
Two videocards:
Code:
# pciconf -lv | grep -B 4 VGA
vgapci1@pci0:0:2:0: card=0x053a1025 chip=0x01168086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family Integrated Graphics Controller'
class = display
subclass = VGA
--
subclass = SMBus
vgapci0@pci0:1:0:0: card=0x053a1025 chip=0x105010de rev=0xa1 hdr=0x00
vendor = 'nVidia Corporation'
class = display
subclass = VGA
xorg bilded and installed with vesa and nv support.
With vesa driver - no problems, everything works, but resolution in KDE only 1024 I need more - 1280.
So, first I tried nv driver.
Here is xorg.conf for nv: http://rtfm.co.ua/uploads/xorg.conf.nv
After startx I got:
Code:
(==) Using config file: "/etc/X11/xorg.conf"
(EE) No devices detected.
Fatal server error:
no screens found
Log is here: http://rtfm.co.ua/uploads/Xorg.0.log.nv
From log I see, that nv driver from x11/nvidia-driver doesn't support my GT 520M card.
OK, next I tried driver from official website NVidia here: http://www.nvidia.com/object/unix.html
After setup 302.17 version and startx - system going to reboot immediately, so I'll not show log of it.
Trying to setup 295.59. Videocard pretend in support devices list.
Make nvidia-xconfig - xorg.conf rewriting to new one, here it is: http://rtfm.co.ua/uploads/xorg.conf.nvidia
After startx I again got:
Code:
(==) Using config file: "/etc/X11/xorg.conf"
(EE) No devices detected.
Fatal server error:
no screens found
Here is log: http://rtfm.co.ua/uploads/Xorg.0.log.nvidia
Main from log:
Code:
(II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 17:27:32 PDT 2012
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is:
(EE) No devices detected.
Fatal server error:
no screens found
Setup and install xorg and NVidia drivers was without any mistakes.
nvidia module booted:
Code:
# kldstat | grep nvidia
2 1 0xffffffff813ce000 e1ec38 nvidia.ko
Present in autoboot:
Code:
# less /boot/loader.conf | grep nvidia
nvidia_load="YES"
procfs mounted:
Code:
# df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ada0s4a 43G 3.6G 36G 9% /
devfs 1.0k 1.0k 0B 100% /dev
procfs 4.0k 4.0k 0B 100% /proc
My dmesg: http://rtfm.co.ua/uploads/dmesg.txt
Unfortunately in my BIOS missing option to disable one from videocards.
Can somebody please explain me - what I doing wrong?
P.S. sorry for my English, greetings from Ukraine