Basic system stats. 8CPU Xeon, 8gB ram, Raid10 hardware BBU
Iostat, dmesg, df -h
http://pastebin.com/PNSQzXze
Basic tuning
No loader settings changed yet, I've yet to reboot since partitioning the rest of the raid as /home. Apache has sendfile enabled, GCC45 did seem to make a boost, only apache is set with gcc45.
Only issues noticed so far is random upload (To the server) speeds while it's only doing a few mbit upload, and we notice it hasn't really pumped more then 45mByte/sec over apache while the linux box's have done alittle more on same network.
I have an identical system to transfer 2 more nodes too just like this one had done, hoping to find some kernel tweaks or something to test on the new system before deploying onto the one I posted stats of above.
Oh and sysctl http://pastebin.com/Yb6we3eT
Work load?
99% static downloads, 5-10mB, some nodes got 50-100mB files.
Goal, up to 1gbps saturation reliable.
We may test drive varnish to relieve apache.
Code:
FreeBSD box2.local.net 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Wed Jun 29 05:26:20 CDT 2011
root@host398106:/usr/obj/usr/src/sys/host398106 amd64
root@FreeBSD box2 /root ->top
last pid: 44812; load averages: 0.27, 0.20, 0.17
up 12+15:06:49 06:08:46
1671 processes:2 running, 1665 sleeping, 3 stopped, 1 zombie
CPU: 5.1% user, 0.0% nice, 3.1% system, 0.0% interrupt, 91.8% idle
Mem: 1114M Active, 5503M Inact, 958M Wired, 171M Cache, 511M Buf, 152M Free
Swap: 2048M Total, 320K Used, 2048M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
1260 root 35 46 0 1230M 100M accept 0 28:58 0.00% java
10116 root 1 50 0 44336K 9064K select 3 9:47 0.00% sshd
13799 www 1 44 0 69260K 5872K accept 0 1:23 0.00% httpd
13798 root 1 44 0 69760K 6188K select 0 0:47 0.00% httpd
1302 root 1 44 0 26260K 3036K select 7 0:33 0.00% sshd
79864 root 1 44 0 19828K 7916K select 0 0:30 0.00% perl5.10.1
40769 www 60 4 0 89600K 15428K select 0 0:04 0.00% httpd
43962 www 63 44 0 89984K 15600K select 4 0:04 0.00% httpd
41258 www 63 44 0 87936K 15424K select 1 0:03 0.00% httpd
43955 www 61 4 0 89728K 15588K select 4 0:03 0.00% httpd
44211 www 63 44 0 89984K 15532K select 0 0:03 0.00% httpd
44422 www 62 4 0 89856K 15488K select 3 0:02 0.00% httpd
44306 www 62 44 0 87808K 15332K select 4 0:02 0.00% httpd
44335 www 55 4 0 86912K 14112K select 0 0:02 0.00% httpd
44352 www 58 44 0 87296K 14844K select 3 0:02 0.00% httpd
44495 www 65 4 0 92288K 15728K select 4 0:02 0.00% httpd
44560 www 61 44 0 87680K 14784K select 4 0:02 0.00% httpd
44559 www 60 4 0 87552K 14732K select 3 0:02 0.00% httpd
41253 www 31 4 0 92288K 15528K select 6 0:01 0.00% httpd
1321 root 1 44 0 7976K 1232K nanslp 6 0:01 0.00% cron
44621 www 56 4 0 87040K 13856K select 6 0:01 0.00% httpd
44612 www 57 4 0 87168K 14276K select 4 0:01 0.00% httpd
40119 www 14 4 0 94372K 15872K select 6 0:01 0.00% httpd
44597 www 50 4 0 84224K 12992K select 4 0:01 0.00% httpd
44632 www 53 4 0 86656K 13424K select 4 0:01 0.00% httpd
39850 www 14 4 0 92416K 15532K select 0 0:01 0.00% httpd
44603 www 50 44 0 84224K 13148K select 5 0:01 0.00% httpd
37761 www 10 4 0 96932K 15364K select 4 0:01 0.00% httpd
44599 www 52 4 0 84480K 13160K select 4 0:01 0.00% httpd
44204 www 31 4 0 87552K 14480K select 0 0:01 0.00% httpd
44652 www 53 4 0 86656K 13400K select 0 0:01 0.00% httpd
44728 www 66 44 0 90496K 15384K ucond 6 0:01 0.00% httpd
//
tty aacd0 aacd1 pass0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 62 51.45 5 0.26 92.45 40 3.60 0.00 0 0.00 0 0 3 0 97
//
dT: 1.007s w: 1.000s
L(q) ops/s r/s kBps ms/r w/s kBps ms/w %busy Name
0 1 0 0 0.0 1 48 0.1 0.0| aacd0
0 45 44 3861 0.4 1 2 0.0 1.9| aacd1
0 1 0 0 0.0 1 48 0.1 0.0| aacd0s1
0 0 0 0 0.0 0 0 0.0 0.0| aacd0s1a
0 0 0 0 0.0 0 0 0.0 0.0| aacd0s1b
0 0 0 0 0.0 0 0 0.0 0.0| aacd0s1d
0 1 0 0 0.0 1 48 0.1 0.0| aacd0s1e
0 0 0 0 0.0 0 0 0.0 0.0| aacd0s1f
//bandwidth lagg1
TX: cumm: 2.04GB peak: 240Mb rates: 230Mb 231Mb 215Mb
RX: 33.5MB 3.95Mb 3.57Mb 3.69Mb 3.45Mb
TOTAL: 2.07GB 244Mb 234Mb 235Mb 218Mb
Iostat, dmesg, df -h
http://pastebin.com/PNSQzXze
Basic tuning
Code:
CPUTYPE?=nocona
MASTER_SITE_OVERRIDE?="http://mirrors.service.softlayer.com/freebsd/distfiles/${DIST_SUBDIR}/"
#CFLAGS=-O2 -pipe -fno-strict-aliasing
#COPTFLAGS=-O2 -pipe -funroll-loops -ffast-math -fno-strict-aliasing
OPTIMIZED_CFLAGS=YES
WITHOUT_X11=YES
#BUILD_OPTIMIZED=YES
WITH_CPUFLAGS=YES
WITH_OPTIMIZED_CFLAGS=YES
WITHOUT_DEBUG=YES
BUILD_STATIC=YES
MAKE_JOBS_NUMBER=4
# added by use.perl 2011-06-29 11:11:56
PERL_VERSION=5.10.1
SUEXEC_DOCROOT=/home
.if !empty(.CURDIR:M/usr/ports/www/*) && exists(/usr/local/bin/gcc45)
.if empty(.CURDIR:M/usr/ports/*)
CC=gcc45
CXX=g++45
CPP=cpp45
CPUTYPE=nocona
CFLAGS+=-march=nocona -mssse3
.endif
.endif
No loader settings changed yet, I've yet to reboot since partitioning the rest of the raid as /home. Apache has sendfile enabled, GCC45 did seem to make a boost, only apache is set with gcc45.
Only issues noticed so far is random upload (To the server) speeds while it's only doing a few mbit upload, and we notice it hasn't really pumped more then 45mByte/sec over apache while the linux box's have done alittle more on same network.
I have an identical system to transfer 2 more nodes too just like this one had done, hoping to find some kernel tweaks or something to test on the new system before deploying onto the one I posted stats of above.
Oh and sysctl http://pastebin.com/Yb6we3eT
Work load?
99% static downloads, 5-10mB, some nodes got 50-100mB files.
Goal, up to 1gbps saturation reliable.
We may test drive varnish to relieve apache.