Hi All!
I successfully installed FreeBSD 12.0-RELEASE on NanoPi-K1-Plus and NanoPi-NEO2.
Checking the assembly was carried out using the native compilation of WORLD and KERNEL on the NanoPi-K1-Plus.
Logs are attached.
To download and use this links.
FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-NEO2.img.xz
FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-K1-Plus.img.xz
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-K1-Plus.img.xz) = b4d5774cdc26b6382271f61842dd2766
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-NEO2.img.xz) = da63fdd40530ed8e4e44a4d40e472e60
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-K1-Plus.img) = 4178f320e6140aff5f59b6ad41933ab2
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-NEO2.img) = 2d4d34a8e198659aa67782cd12bc4504
Use SSH to login.
I wish you success!
I successfully installed FreeBSD 12.0-RELEASE on NanoPi-K1-Plus and NanoPi-NEO2.
Checking the assembly was carried out using the native compilation of WORLD and KERNEL on the NanoPi-K1-Plus.
Logs are attached.
Code:
>>> World build started on Mon Dec 10 14:42:42 MSK 2018
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 3.1: recording build metadata
>>> stage 4.1: building includes
>>> stage 4.2: building libraries
>>> stage 4.3: building everything
>>> World build completed on Mon Dec 10 15:31:09 MSK 2018
>>> Kernel build for NANOPI started on Mon Dec 10 15:33:09 MSK 2018
>>> stage 1: configuring the kernel
>>> stage 2.3: build tools
>>> stage 3.1: building everything
>>> Kernel build for NANOPI completed on Mon Dec 10 15:36:14 MSK 2018
>>> Install check world
>>> Making hierarchy
>>> Installing everything started on Mon Dec 10 15:38:19 MSK 2018
>>> Installing everything completed on Mon Dec 10 15:46:06 MSK 2018
>>> Install check kernel
>>> Installing kernel NANOPI on Mon Dec 10 15:49:30 MSK 2018
>>> Installing kernel NANOPI completed on Mon Dec 10 15:50:36 MSK 2018
Code:
admin@nanopi-k1-plus:/usr/src % dmesg
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE #1 r341703M: Mon Dec 10 15:33:53 MSK 2018
root@nanopi-k1-plus:/usr/obj/usr/src/arm64.aarch64/sys/NANOPI arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT: init without driver.
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 47ffe000 mode 2 pages 2
MAP 48005000 mode 2 pages 2
MAP b8f1d000 mode 2 pages 1
MAP b8f22000 mode 2 pages 1
MAP bdf49000 mode 2 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofw_clkbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 38 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 18,19,20 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 44 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpioregulator0: <GPIO controlled regulator> on ofwbus0
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 40,41 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c1c803,0x1c1d800-0x1c1d803 on simplebus0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 6 on simplebus0
mmc0: <MMC/SD bus> on aw_mmc0
aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff irq 7 on simplebus0
mmc1: <MMC/SD bus> on aw_mmc1
aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff irq 8 on simplebus0
mmc2: <MMC/SD bus> on aw_mmc2
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 10 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 11 on simplebus0
usbus1 on ohci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 12 on simplebus0
usbus2: EHCI version 1.0
usbus2 on ehci1
ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 13 on simplebus0
usbus3 on ohci1
ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff irq 14 on simplebus0
usbus4: EHCI version 1.0
usbus4 on ehci2
ohci2: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 15 on simplebus0
usbus5 on ohci2
ehci3: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff irq 16 on simplebus0
usbus6: EHCI version 1.0
usbus6 on ehci3
ohci3: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 17 on simplebus0
usbus7 on ohci3
gpioc0: <GPIO controller> on gpio0
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 23 on simplebus0
miibus0: <MII bus> on awg0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 7 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
awg0: Ethernet address: 02:82:8e:06:38:08
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 26 on simplebus0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 31 on simplebus0
uart0: console (115384,n,8,1)
aw_ir0: <Allwinner CIR controller> mem 0x1f02000-0x1f0203f irq 42 on simplebus0
gpioc1: <GPIO controller> on gpio1
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 45 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Allwinner EHCI root HUB> at usbus0
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Allwinner EHCI root HUB> at usbus2
uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen4.1: <Allwinner EHCI root HUB> at usbus4
uhub3: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
usbus7: 12Mbps Full Speed USB v1.0
AW_MMC_INT_RESP_TIMEOUT
ugen5.1: <Generic OHCI root HUB> at usbus5
uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Allwinner EHCI root HUB> at usbus6
uhub6: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen7.1: <Generic OHCI root HUB> at usbus7
uhub7: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc0: No compatible cards found on bus
aw_mmc0: Spurious interrupt - no active request, rint: 0x00000004
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc1: No compatible cards found on bus
aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
uhub1: 1 port with 1 removable, self powered
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
uhub4: 1 port with 1 removable, self powered
AW_MMC_INT_DATA_END_BIT_ERR
AW_MMC_INT_RESP_TIMEOUT
uhub5: 1 port with 1 removable, self powered
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
uhub7: 1 port with 1 removable, self powered
mmcsd0: 16GB <MMCHC AJNB4R 0.7 SN 238CECF9 MFG 03/2018 by 21 0x0000> at mmc2 52.0MHz/8bit/4096-block
mmcsd0boot0: 4MB partion 1 at mmcsd0
mmcsd0boot1: 4MB partion 2 at mmcsd0
mmcsd0rpmb: 4MB partion 3 at mmcsd0
Release APs...done
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <0>
Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
Debug Features 1 = <0>
WARNING: / was not properly dismounted
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
uhub0: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
uhub6: 1 port with 1 removable, self powered
lo0: link state changed to UP
awg0: link state changed to DOWN
awg0: link state changed to UP
admin@nanopi-k1-plus:/usr/src %
To download and use this links.
FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-NEO2.img.xz
FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-K1-Plus.img.xz
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-K1-Plus.img.xz) = b4d5774cdc26b6382271f61842dd2766
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-NEO2.img.xz) = da63fdd40530ed8e4e44a4d40e472e60
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-K1-Plus.img) = 4178f320e6140aff5f59b6ad41933ab2
MD5 (FreeBSD-aarch64-12.0-RELEASE-341684M-NanoPi-NEO2.img) = 2d4d34a8e198659aa67782cd12bc4504
Use SSH to login.
Code:
Login: admin
Password: admin
admin@nanopi-k1-plus:~ % uname -a
FreeBSD nanopi-k1-plus 12.0-RELEASE FreeBSD 12.0-RELEASE #1 r341703M: Mon Dec 10 15:33:53 MSK 2018 root@nanopi-k1-plus.kubsu.ru:/usr/obj/usr/src/arm64.aarch64/sys/NANOPI arm64
admin@nanopi-k1-plus:~ % su - root
root@nanopi-k1-plus:~ #
I wish you success!
Attachments
Last edited: