Hello!
I have been working to get my new file server up and running this weekend. It has not been going very well. Any help you can offer is greatly appreciated!
The hardware is a Intel D945 Desktop Board with a SIGG 2 port PCI SATA controller. I have 2 IDE drives, 3 Hitachi 1TB drives (brand new), 2 Samsung 1TB drives (brand new) and 1 Seagate 1.5TB drive. I know the SIGG controller works because it was pulled from my prior server that is/was working (the Seagate 1.5TB drive and IDE drives are from that server as well).
I have tried the following items with no luck:
1. Having only 1 drive connected at a time with different cables
2. Removing the SIGG controller
3. Using only the SIGG controller
4. Different power supply
5. New SATA cables
6. AHCI (didn't detect anything)
The errors seen are:
Here is the full info from boot up http://pastebin.com/8WdEPrD5 (sorry, it was too long to post here).
I don't get any other error messages other the what is listed. If I attempt to create a zpool or do anything else with the 1TB drives the READ_DMA48 and READ_DMA errors show up.
Thanks for any assistance.
-Penta
I have been working to get my new file server up and running this weekend. It has not been going very well. Any help you can offer is greatly appreciated!
The hardware is a Intel D945 Desktop Board with a SIGG 2 port PCI SATA controller. I have 2 IDE drives, 3 Hitachi 1TB drives (brand new), 2 Samsung 1TB drives (brand new) and 1 Seagate 1.5TB drive. I know the SIGG controller works because it was pulled from my prior server that is/was working (the Seagate 1.5TB drive and IDE drives are from that server as well).
I have tried the following items with no luck:
1. Having only 1 drive connected at a time with different cables
2. Removing the SIGG controller
3. Using only the SIGG controller
4. Different power supply
5. New SATA cables
6. AHCI (didn't detect anything)
The errors seen are:
Code:
Oct 10 22:36:33 titan kernel: ad0: 29325MB <Maxtor 6E030L0 NAR61590> at ata0-master UDMA100
Oct 10 22:36:33 titan kernel: ad1: 190782MB <Seagate ST3200822A 3.01> at ata0-slave UDMA100
Oct 10 22:36:33 titan kernel: ad4: 953869MB <SAMSUNG HD103SJ 1AJ10001> at ata2-master UDMA100 SATA 1.5Gb/s
Oct 10 22:36:33 titan kernel: ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525151
Oct 10 22:36:33 titan kernel: ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525164
Oct 10 22:36:33 titan kernel: ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad4: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525105
Oct 10 22:36:33 titan kernel: ad6: 953869MB <SAMSUNG HD103SJ 1AJ10001> at ata3-master UDMA100 SATA 1.5Gb/s
Oct 10 22:36:33 titan kernel: ad6: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad6: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525151
Oct 10 22:36:33 titan kernel: ad6: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525164
Oct 10 22:36:33 titan kernel: ad6: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad6: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad6: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525105
Oct 10 22:36:33 titan kernel: ad8: 953869MB <Hitachi HDS721010CLA332 JP4OA25C> at ata4-master UDMA100 SATA
Oct 10 22:36:33 titan kernel: ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525165
Oct 10 22:36:33 titan kernel: ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525151
Oct 10 22:36:33 titan kernel: ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525164
Oct 10 22:36:33 titan kernel: ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525105
Oct 10 22:36:33 titan kernel: ad9: 953869MB <Hitachi HDS721010CLA332 JP4OA25C> at ata4-slave UDMA100 SATA
Oct 10 22:36:33 titan kernel: ad9: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525165
Oct 10 22:36:33 titan kernel: ad9: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525151
Oct 10 22:36:33 titan kernel: ad9: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525164
Oct 10 22:36:33 titan kernel: ad9: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad9: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad9: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525105
Oct 10 22:36:33 titan kernel: ad10: 953869MB <Hitachi HDS721010CLA332 JP4OA25C> at ata5-master UDMA100 SATA
Oct 10 22:36:33 titan kernel: ad10: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525165
Oct 10 22:36:33 titan kernel: ad10: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525151
Oct 10 22:36:33 titan kernel: ad10: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525164
Oct 10 22:36:33 titan kernel: ad10: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad10: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525167
Oct 10 22:36:33 titan kernel: ad10: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=1953525105
Oct 10 22:36:33 titan kernel: ad11: 1430799MB <Seagate ST31500341AS CC1H> at ata5-slave UDMA100 SATA
Here is the full info from boot up http://pastebin.com/8WdEPrD5 (sorry, it was too long to post here).
I don't get any other error messages other the what is listed. If I attempt to create a zpool or do anything else with the 1TB drives the READ_DMA48 and READ_DMA errors show up.
Thanks for any assistance.
-Penta