Hey!
I'm stuck with lagg-device and IPv6.
Everything works fine with IPv4, unless I plugin a IPv6 network.
If a IPv6 cable is attached, no network access is possible.
Any Ideas?
/etc/rc.conf:
I'm stuck with lagg-device and IPv6.
Everything works fine with IPv4, unless I plugin a IPv6 network.
If a IPv6 cable is attached, no network access is possible.
Any Ideas?
/etc/rc.conf:
Code:
ifconfig_em0="up"
wlans_iwm0="wlan0"
ifconfig_wlan0="WPA"
create_args_wlan0="wlanaddr aa:bb:cc:da:23:42"
cloned_interfaces="lagg0"
ifconfig_lagg0="up laggproto failover laggport em0 laggport wlan0 DHCP"
ifconfig_lagg0_ipv6="inet6 accept_rtadv"
rtsold_enable="YES" # ifconfig
Code:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=200080<VLAN_HWCSUM,RXCSUM_IPV6>
ether aa:bb:cc:da:23:42
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo 50
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 50:7b:9d:da:21:68
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11a
status: associated
ssid Echelon channel 36 (5180 MHz 11a) bssid 12:23:42:23:5:23
regdomain FCC country US authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 17 bmiss 10
mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL
groups: wlan
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether aa:bb:cc:da:23:42
inet6 fe80::bbbb:aaaa:ddee:2342%lagg0 prefixlen 64 scopeid 0x4
inet6 fd00::bbbb:aaaa:ddee:2342 prefixlen 64 autoconf
inet 192.168.0.122 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
groups: lagg
laggproto failover lagghash l2,l3,l4
laggport: em0 flags=1<MASTER>
laggport: wlan0 flags=4<ACTIVE>