I have a CX23883-based video capture card (appears to be a kworld vs883dv-pro). While the cx88 driver loads as directed and detects the card, the cx88 app doesn't recognize the card type:
dmesg shows me:
kldstat says:
and pciconf tells me:
I also only see /dev/cx88video0, no other cx88 devices.
I think the card is not recognized because it's a capture-only card (there isn't any receiver/tuner), and that card ID (0x0?) isn't in the driver. I see the part of the driver that generates the message, but I'm a bit skeptical about just hacking the driver to make it look like the existing kworld dvb-t card.
Any reasonable solution to this? (I'm not above messing with the driver, but I haven't done much at this level for a while.)
(running 7.2-release, driver installed from packages)
(This all started because I couldn't get the bt848-based card to work....)
tanks,
z!
Code:
roxton# cx88 -d /dev/cx88video0 -x ~/cx88.xml
[cx88] Unrecognized card ID: 0x0
[cx88] Unable to create cx88 video driver
roxton#dmesg shows me:
Code:
cx88video0: <Conexant CX2388x Analog Video> mem 0xfa000000-0xfaffffff irq 17 at device 8.0 on pci3
iicbus0: <Philips I2C bus> on cx88video0
iicbus0: <unknown card> at addr 0
iicbus0: <unknown card> at addr 0
cx88video0: [FILTER]
cx88video0: [FILTER+ITHREAD]kldstat says:
Code:
14 5 0xc4895000 6000 cx88.ko
15 1 0xc489b000 7000 cx88audio.ko
16 3 0xc48a2000 3000 iicdev.ko
17 5 0xc48a5000 3000 iicbus.ko
18 3 0xc48a8000 4000 cx88i2c.ko
19 1 0xc48b0000 7000 cx88video.ko
20 1 0xc48b7000 5000 cx88mpeg.koand pciconf tells me:
Code:
cx88video0@pci0:3:8:0: class=0x040000 card=0x00000000 chip=0x880014f1 rev=0x05 hdr=0x00
vendor = 'Conexant Systems, Inc.'
device = '23880 Conexant 23880 Video Capture (NTSC)'
class = multimedia
subclass = video
(and the firewire i/f, too)I also only see /dev/cx88video0, no other cx88 devices.
I think the card is not recognized because it's a capture-only card (there isn't any receiver/tuner), and that card ID (0x0?) isn't in the driver. I see the part of the driver that generates the message, but I'm a bit skeptical about just hacking the driver to make it look like the existing kworld dvb-t card.
Any reasonable solution to this? (I'm not above messing with the driver, but I haven't done much at this level for a while.)
(running 7.2-release, driver installed from packages)
(This all started because I couldn't get the bt848-based card to work....)
tanks,
z!