Can't wake up after sleep.

unique name · Aug 20, 2021

If I put my pc to sleep by typing "zzz" it goes to sleep, (monitor turns off and the power led is blinking) ( light on wifi adapter remains on though). But when I press the power key, nothing shows up on monitor. The led on cpu case goes back to normal instead of blinking, light on motherboard is back on, but nothing on monitor. Tried pressing keys too but nothing worked.
Using freebsd 13 release with dwm.

unique name · Aug 21, 2021

any guesses how to fix this?

mark_j · Aug 21, 2021

No guesses, but can you connect to it from another machine, say via ssh. That will enable you to get more info. from the system.

Hakaba · Aug 21, 2021

Could you please add you /etc/rc.cong and /boot/loader.conf ?
I have the same issue (FreeBSD, DWM, intel graphics) but I do not remember the fix I found
I could compare you file with mine.

unique name · Aug 21, 2021

mark_j said:
No guesses, but can you connect to it from another machine, say via ssh. That will enable you to get more info. from the system.

I dont have another machine. I have android though.

unique name · Aug 21, 2021

Hakaba said:
Could you please add you /etc/rc.cong and /boot/loader.conf ?
I have the same issue (FreeBSD, DWM, intel graphics) but I do not remember the fix I found
I could compare you file with mine.

rc.conf

Code:

zfs_enable="YES"
clear_tmp_enable="YES"
syslogd_flags="-ss"
sendmail_enable="NONE"
hostname="a.a.a"
keymap="colemak.acc.kbd"
create_args_wlan0="country IN"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
wlans_run0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"

kld_list="amdgpu"
ntpd_enable="YES"
ntpd_sync_on_start="YES"

/boot/loader.conf

Code:

cryptodev_load="YES"
zfs_load="YES"
iichid_load="YES"

VladiBG · Aug 21, 2021

Don't waste time on this one.
Suspend/resume has never been top priority for FreeBSD devs as it's aimed to be used on servers not on users laptop. So if it's not working on your hardware just accept it and move on or if you have programing skill and want to contribute you are more than welcome.

Making sure you're not a bot!

mark_j · Aug 21, 2021

It's also because it's so specific to various vendors. Another issue of closed-source variations by vendors to protect their hardware.
Just look at the wiki and all the variations. No wonder it's not supported; who could be bothered.

Hakaba · Aug 22, 2021

I have an MSI P65 laptop and solve the same issue after installing desktop-installer (without WM, as I use DWM)

I will copy/paste my config files when I go home.

At least, I have powerd enabled.

Cath O'Deray · Aug 22, 2021

unique name said:
kld_list="amdgpu"

What's the hardware?

Share a probe if you like. The first of these two commands is a one-off:

pkg install -y sysutils/hw-probe sysutils/lsblk sysutils/pciutils sysutils/usbutils
kldload fusefs && hw-probe -all -upload

AMD here, radeonkms.

For me: wake from sleep was previously unreliable, became reliable some time ago. FreeBSD 14.0-CURRENT. <https://bsd-hardware.info/?computer=6fbb1f806232>

mark_j said:
… the wiki and all the variations. No wonder it's not supported; who could be bothered. …

There is the will to make things work; to fix, wherever possible/reasonable.

Like most wikis, the given page is not a true reflection of things.

unique name · Aug 22, 2021

grahamperrin said:
What's the hardware?

Share a probe if you like:

pkg install -y sysutils/hw-probe sysutils/lsblk sysutils/pciutils sysutils/usbutils

hw-probe -all -upload

AMD here, radeonkms.

For me: wake from sleep was previously unreliable, became reliable some time ago. FreeBSD 14.0-CURRENT. <https://bsd-hardware.info/?computer=6fbb1f806232>

There is the will to make things work; to fix, wherever possible/reasonable.

Like most wikis, the given page is not a true reflection of things.

doas hw-probe -all -upload
Probe for hardware ... fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
fstat: /dev/fuse: No such file or directory
Ok
Reading logs ... Ok
Uploaded to DB, Thank you!

Probe URL: https://bsd-hardware.info/?probe=ff33f91374

Cath O'Deray · Aug 22, 2021

unique name said:
fstat: /dev/fuse: No such file or directory

Yeah, sorry about that.

fstat: /dev/fuse: No such file or directory · Issue #3 · vermaden/lsblk

Hi! I've just upgraded to 3.6 and I'm getting the following error: # lsblk DEVICE MAJ:MIN SIZE TYPE LABEL MOUNT ada0 0:101 233G GPT - - fstat: /dev/fuse: No such file or directory ada0p1 0:102 512K...

github.com

Interim workaround: <https://old.reddit.com/r/freebsd/comments/p3pub6/-/h8vzx55/> – edited into step (2) above.

Hakaba · Aug 23, 2021

Sorry, I did not have the time to copy/paste my files. And now I am working at 320km of my laptop for 5 days...

Cath O'Deray · Aug 23, 2021

Hakaba said:
Sorry, I did not have the time to copy/paste my files.

When you're back at the computer: maybe easier to share the result of a hardware probe. The two commands at <https://forums.FreeBSD.org/threads/81787/post-528358> above.

unique name · Aug 23, 2021

grahamperrin said:
Yeah, sorry about that.

fstat: /dev/fuse: No such file or directory · Issue #3 · vermaden/lsblk

Hi! I've just upgraded to 3.6 and I'm getting the following error: # lsblk DEVICE MAJ:MIN SIZE TYPE LABEL MOUNT ada0 0:101 233G GPT - - fstat: /dev/fuse: No such file or directory ada0p1 0:102 512K...

github.com

Interim workaround: <https://old.reddit.com/r/freebsd/comments/p3pub6/-/h8vzx55/> – edited into step (2) above.

HW probe of MSI B450 TOMAHAWK Desktop Computer (MS-7C02) #b7c1cae5a8

A database of all the hardware that works under bsd

bsd-hardware.info

Cath O'Deray · Aug 23, 2021

Thanks.

<https://bsd-hardware.info/?id=pci:1002-67df-1da2-e353#status> there's a note of someone disabling the EFI framebuffer during boot with FreeBSD 12.⋯. I don't know whether that's appropriate/required with 13.0-RELEASE-p3, neither can I guess whether it'll have any effect on wake.

Without attempting to sleep: can you switch from the desktop environment to ttyv1 and back?
Control-Alt-F2, Alt-F9

And does ttyv1 appear as it should?

Incidentally, re: <https://bsd-hardware.info/?probe=b7c1cae5a8&log=pkglist> try installing x11-drivers/xf86-video-amdgpu

unique name · Aug 24, 2021

grahamperrin said:
Thanks.

<https://bsd-hardware.info/?id=pci:1002-67df-1da2-e353#status> there's a note of someone disabling the EFI framebuffer during boot with FreeBSD 12.⋯. I don't know whether that's appropriate/required with 13.0-RELEASE-p3, neither can I guess whether it'll have any effect on wake.

Without attempting to sleep: can you switch from the desktop environment to ttyv1 and back?
Control-Alt-F2, Alt-F9

And does ttyv1 appear as it should?

Incidentally, re: <https://bsd-hardware.info/?probe=b7c1cae5a8&log=pkglist> try installing x11-drivers/xf86-video-amdgpu

tty works normally, and I can return to xorg too.
I installed the port. Do I need to enable something/ load it to boot loader?

Cath O'Deray · Aug 24, 2021

unique name said:
Do I need to enable something/ load it to boot loader?

No.

unique name · Aug 25, 2021

grahamperrin said:
No.

didn't work

unique name · Aug 27, 2021

unique name said:
tty works normally, and I can return to xorg too.
I installed the port. Do I need to enable something/ load it to boot loader?

I am dual booting with windows. I noticed that sleep has stopped working in windows and time changed too in windows.

bsduck · Aug 27, 2021

unique name said:
time changed too in windows

Have a look at this: https://wiki.archlinux.org/title/System_time#UTC_in_Microsoft_Windows

unique name · Aug 27, 2021

bsduck said:
Have a look at this: https://wiki.archlinux.org/title/System_time#UTC_in_Microsoft_Windows

I don't care about windows, I mentioned that just to tell that dual booting might also be the reason of this issue.
Thanks anyways

<3

Hakaba · Sep 18, 2021

Sorry for the long response.
Back to home !
Here is the probe : Hakaba Probe

I do not see the configs files in probe, so :
/etc/rc.conf :

Bash:

mixer_enable="YES"
keymap="fr.kbd"
moused_enable="YES"
autofs_enable="YES"
git_daemon_enable="YES"
webcamd_enable="YES"
zfs_enable="YES"
zfsd_enable="YES"
ntpdate_enable="YES"
firewall_enable="YES"
firewall_type="client"
firewall_client_net="192.168.1.0/24"
firewall_script="/etc/ipfw.rules"
# below, added and solve the issue
powerd_enable="YES"
ntpdate_flags="-u pool.ntp.org"
ntpd_enable="YES"
nfs_client_enable="YES"
rpc_statd_enable="YES"
rpc_lockd_enable="YES"
devd_enable="YES"
devfs_system_ruleset="system"
dbus_enable="YES"
cupsd_enable="YES"
linux_enable="YES"
bsdstats_enable="YES"

Cath O'Deray · Sep 18, 2021

Thanks.

<https://storage-asset.msi.com/datasheet/content-creation/global/P65-CREATOR-8RX.pdf> seems to be half-empty, <https://www.msi.com/Content-Creation/P65-CREATOR-8RE/Specification> is better.

<https://bsd-hardware.info/?probe=2684b5021c#pci:10de-1c20-1462-1244> NVIDIA GP106M [GeForce GTX 1060 Mobile]

<https://bsd-hardware.info/?probe=2684b5021c#pci:8086-3e9b-1462-1244> Intel CoffeeLake-H GT2 [UHD Graphics 630]

Are there settings in BIOS for hybrid graphics (or words to that effect)?

meaw229a · Sep 18, 2021

I have had the same issue. Computer not coming back from Sleep. Setup is 13.0 release Efi boot.

I fixed it in the Bios. Just turned TPM and Bluethooth off. Also no secure and fast boot.

This fixed it for me without touching any config file.

Suspend/Resume works as it should do.

May be give it a try.