Hello,
First post here after years of reading, I didn't find any answers yet, so I give it a try here.
I can't drag any window outside of 2048x2048 resolution, I mean windows are well drawn outside this region until viewable virtual resolution fixed to 2304xx2048. Mouse can go alone outside 2048x2048. Mouse cursor just cannot go outside the 2048 horizontal value when I drag a window.
I am using FreeBSD 8.2 release -p2 on a PC like AMD quad/4GB of RAM with an addon Sapphire X1950 Pro 512MB, Xorg 7.5.1 and KDE 3.5.10_8. I have a dual head configuration rotated left (1152+1152)x2048 of Samsung Sync Master 2343 I manage with xrandr.
I don't know if it's an Xorg or KDE problem, I had it before the upgrade I describe above.
I have another problem but it can wait. It is since I made a buildworld/installworld and full upgrade of ports (portmaster, portupgrade and /usr/ports/UPDATING were my friends) coming from 8.0 release :
the first display only lights on after ~2 minutes when runing startx command and when running xrandr command, I must wait again ~3 minutes after playing with the second display font panel (switching on/off and VGA/DVI source) for it to light on.
I am starting Xorg with
After that, I just ran xrandr in a terminal with these options
Here is my /etc/X11/xorg.conf configuration file
And xrandr -q output
Any help, advice or comment wil be very appreciated. I can also provide more or missing information.
I hope I didn't run out of the Forum Rules in my first post.
Thanks,
Geodni
First post here after years of reading, I didn't find any answers yet, so I give it a try here.
I can't drag any window outside of 2048x2048 resolution, I mean windows are well drawn outside this region until viewable virtual resolution fixed to 2304xx2048. Mouse can go alone outside 2048x2048. Mouse cursor just cannot go outside the 2048 horizontal value when I drag a window.
I am using FreeBSD 8.2 release -p2 on a PC like AMD quad/4GB of RAM with an addon Sapphire X1950 Pro 512MB, Xorg 7.5.1 and KDE 3.5.10_8. I have a dual head configuration rotated left (1152+1152)x2048 of Samsung Sync Master 2343 I manage with xrandr.
I don't know if it's an Xorg or KDE problem, I had it before the upgrade I describe above.
I have another problem but it can wait. It is since I made a buildworld/installworld and full upgrade of ports (portmaster, portupgrade and /usr/ports/UPDATING were my friends) coming from 8.0 release :
the first display only lights on after ~2 minutes when runing startx command and when running xrandr command, I must wait again ~3 minutes after playing with the second display font panel (switching on/off and VGA/DVI source) for it to light on.
I am starting Xorg with
$ startx -- :0 -dpi 75
After that, I just ran xrandr in a terminal with these options
$ xrandr --verbose --output DVI-0 --rotate left --pos 0x0 --output DVI-1 --right-of DVI-0 --rotate left
Here is my /etc/X11/xorg.conf configuration file
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
Option "AllowEmptyInput" "off"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
FontPath "/usr/local/lib/X11/fonts/cyrillic/"
FontPath "/usr/local/lib/X11/fonts/encodings/"
FontPath "/usr/local/lib/X11/fonts/util/"
FontPath "/usr/local/lib/X11/fonts/local/"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "fr"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "SyncMaster 2343"
Option "DPMS"
Option "Primary" "True"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Samsung"
ModelName "SyncMaster 2343"
Option "DPMS"
Option "RightOf" "DVI-0"
Option "Primary" "False"
EndSection
Section "Device"
Identifier "Card1"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV580 [Radeon X1950 Pro]"
BusID "PCI:1:0:0"
Option "DRI" "on"
Option "AccelMethod" "exa"
Option "UseEvents" "On"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RS780 [Radeon HD3300]"
BusID "PCI:1:5:0"
Option "DRI" "on"
Option "UseEvents" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card1"
Monitor "Monitor0"
SubSection "Display"
Depth 24
Modes "2048x1152"
Virtual 2304 2048
EndSubSection
EndSection
And xrandr -q output
Code:
> xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 2048, maximum 2304 x 2048
DVI-1 connected 1152x2048+1152+0 left (normal left inverted right x axis y axis) 510mm x 287mm
2048x1152 59.9*+
1680x1050 59.9
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1280x800 59.9
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DVI-0 connected 1152x2048+0+0 left (normal left inverted right x axis y axis) 510mm x 287mm
2048x1152 59.9*+
1680x1050 59.9
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1280x800 59.9
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
I hope I didn't run out of the Forum Rules in my first post.
Thanks,
Geodni