Can someone please enlighten me on this error message?

W

Weinter

FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-BETA2 #2: Thu Nov 20 16:47:07 SGT 2008
root@:/usr/obj/usr/src/sys/GRIFFIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) X2 Dual-Core Mobile RM-72 (2100.02-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x200f31 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,L M,3DNow!+,3DNow!>
AMD Features2=0x131f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch ,<b9>,<b12>>
Cores per package: 2
real memory = 2951544832 (2814 MB)
avail memory = 2881748992 (2748 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
no match for ZwOpenKey
no match for ZwDeleteKey
no match for IoOpenDeviceRegistryKey
no match for ZwCreateKey
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1a00-0x1aff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc8006000-0xc8006fff irq 18 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 6 ports with 6 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc8007000-0xc80070ff irq 19 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 15 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 6 ports with 6 removable, self powered
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.87, addr 2> on uhub1
ugen0: <SuYin Acer Crystal Eye webcam, class 239/2, rev 2.00/1.00, addr 3> on uhub1
ohci1: <OHCI (generic) USB controller> mem 0xc8008000-0xc8008fff irq 20 at device 4.0 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc8007400-0xc80074ff irq 21 at device 4.1 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controller, 15 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
pcm0: <NVidia (Unknown) High Definition Audio Controller> mem 0xc8000000-0xc8003fff irq 22 at device 7.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <nVidia AHCI controller> port 0x30e0-0x30e7,0x30d4-0x30d7,0x30d8-0x30df,0x30d0-0x30d3,0x30c0-0x30cf mem 0xc8004000-0xc8005fff irq 23 at device 9.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xc9000000-0xc9ffffff,0xd0000000-0xd7ffffff,0xcc000000-0xcdffffff irq 19 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 19.0 on pci0
pci8: <ACPI PCI bus> on pcib3
pci8: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 20.0 on pci0
pci9: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 21.0 on pci0
pci11: <ACPI PCI bus> on pcib5
ndis0: <Atheros AR928X Wireless Network Adapter> mem 0xca400000-0xca40ffff irq 18 at device 0.0 on pci11
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
NDIS: could not find file AW1012d.ini in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
NDIS: could not find file regAdd.txt in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
ndis0: WARNING: using obsoleted if_watchdog interface
ndis0: Ethernet address: 00:17:c4:3b:cf1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 305245MB <WDC WD3200BEVT-22ZCT0 11.01A11> at ata2-master SATA300
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
acd0: DVDR <HL-DT-ST DVDRAM GSA-T50N/RP05> at ata3-master SATA150
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20080420_0052>
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad4s1 is ntfs/PQSERVICE.
Trying to mount root from ufs:/dev/ad4s4a
NDIS: open file /compat/ndis/AW1012d.ini failed: 2
NDIS: open file /compat/ndis/regAdd.txt failed: 2
ndis0: setting BSSID failed: 45
NDIS: open file /compat/ndis/AW1012d.ini failed: 2
NDIS: open file /compat/ndis/regAdd.txt failed: 2
ndis0: setting BSSID failed: 45
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled

Can anyone explain the output in bold
The ndis0 works but i don't understand the words in bold

Thanks
 
Weinter said:
no match for ZwOpenKey
no match for ZwDeleteKey
no match for IoOpenDeviceRegistryKey
no match for ZwCreateKey
Click to expand...
If system did not panic on this messages than it is fine.
That mesages mean that such functions are not implemented yet in FreeBSD ndisulator

NDIS: could not find file AW1012d.ini in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
NDIS: could not find file regAdd.txt in linker list
NDIS: and no filesystems mounted yet, aborting NdisOpenFile()
NDIS: open file /compat/ndis/AW1012d.ini failed: 2
NDIS: open file /compat/ndis/regAdd.txt failed: 2
ndis0: setting BSSID failed: 45
NDIS: open file /compat/ndis/AW1012d.ini failed: 2
NDIS: open file /compat/ndis/regAdd.txt failed: 2
ndis0: setting BSSID failed: 45
Click to expand...

These messages are also not important if ndis0 works correctly.
Ignore them. Otherwise you could copy them from original location to

/compat/ndis/

that directory is also alternative location for firmware files.
So that you dont need to build/load firmware.ko and others ....
 
richardpl said:
These messages are also not important if ndis0 works correctly.
Ignore them. Otherwise you could copy them from original location to

/compat/ndis/

that directory is also alternative location for firmware files.
So that you dont need to build/load firmware.ko and others ....
Click to expand...

Is /compat/ndis/ the full path?
I don't know where to get the files from?

I also don't understand the part in bold i because i already kldload the ndisgen drivers
 
Isn't your card supported by the ath driver? If so why use ndis?
 
SirDice said:
Isn't your card supported by the ath driver? If so why use ndis?
Click to expand...

No unfortunately new Laptops that come with atheros Wireless Draft N standards are not supported by the current atheros driver in FreeBSD due to different chipset:x
 
Weinter said:
Is /compat/ndis/ the full path?
Click to expand...
Yes.
I don't know where to get the files from?
Click to expand...
Perhaps from Windows, somewhere in C:\WINDOWS\SYSTEM32 ....

I also don't understand the part in bold i because i already kldload the ndisgen drivers
Click to expand...
That part is not important if your card is working correctly.
It just explain that there is alternative way for loading firmware files.
 
You must log in or register to reply here.
Back
Top