Can I have my money back?

zirias@

zirias@

Developer
Background: I have a PCIe card that doesn't support MSI. This is -- very unfortunate, as there are currently no FreeBSD drivers for this card, only Linux drivers, and without MSIs, it seems there's no way to use it from a virtual machine.

Now I read in different places that MSI is mandatory for PCIe? Is this true? If this card was advertised as PCIe, can I have my money back?
 
Zirias said:
Now I read in different places that MSI is mandatory for PCIe?
Click to expand...
I am not familiar with that card but at $150USD bare I understand your concerns.

Zirias said:
Now I read in different places that MSI is mandatory for PCIe?
Click to expand...
Yes MSI or the newer MSI-x is needed for PCIe.

https://openvoxusa.com/A810E?
Adjustable Interrupt Routing Design
Interrupts Frequency Adjustment

FreeBSD has some hints for MSI.
https://www.freebsd.org/cgi/man.cgi?ahci(4)

hint.ahci.X.msi
controls Message Signaled Interrupts (MSI) usage by the specified con-
troller.

0 MSI disabled;
1 single MSI vector used, if supported;
2 multiple MSI vectors used, if supported (default);
 
Phishfry said:
at $150USD bare I understand your concerns.
Click to expand...
That's just the base price, of course I ordered a board with 8 FXS modules piggy-backed ... arghhhhh

Unfortunately I don't quite understand the rest of your post, but it sounds promising ;) But .. isn't ahci a storage interface?
 
Yes you are correct, that AHCI hint appears to be for storage devices.
What does pciconf -lvbc show for the device?
 
Phishfry said:
What does pciconf -lvbc show for the device?
Click to expand...
Code: 
none5@pci0:5:0:0:       class=0x078000 card=0x00011b74 chip=0x08101b74 rev=0x14 hdr=0x00                                                                       
    vendor     = 'OpenVox Communication Co. Ltd.'                             
    class      = simple comms                                                 
    bar   [10] = type Memory, range 32, base 0xdfe00000, size 524288, enabled

I guess it really doesn't support MSIs, so I guess this is a PCIe spec violation? :o
 
Phishfry said:
That or FreeBSD is not picking up the 'cap' due to lack of a driver.
Click to expand...

Which is, based on my "dangerous partial knowledge" ;) quite unlikely. After all, ppt can pick up any PCI device and must be able to detect the MSI/MSI-X abilities for vmm :o

So if I'm right here ... is violating a spec reason enough to request a refund? Unfortunately, I bought this card 2 years ago, then moved to a new house and due to problems with the telcos / ISPs, I didn't have a DSL line until a few weeks ago, so I discovered this problem very late :o
 
Did the vendor you bought the card from claim that it would work with FreeBSD?
Did they claim that the card is fully compliant with the spec?
Same two questions for the manufacturer?
 
Silly question but have you tried the card in different slots?
Does this happen to be a server board? Some servers use a PCIe bridge chip and need attention..
I prefer the many embedded boxs approach versus a VM.
 
Well, my question boils down to: do you have to claim "full compliance" when you sell a PCIe card? Isn't "full compliance" implied? Maybe I should ask a lawyer :o
 
Phishfry said:
Silly question but have you tried the card in different slots?
Click to expand...
Maybe not so silly .. no, I didn't try. I thought this was a thing from the past with hard-wired IRQ lines on the PCI slots ;)
Phishfry said:
Does this happen to be a server board? Some servers use a PCIe bridge chip and need attention..
Click to expand...
It IS a server board. Anything I should read about this "attention" needed? Thanks! :)
 
To check, see if this or some variant shows up in you pciconf.
device = 'PCI Express-to-PCI Express Bridge'

Different slots can be on PCIe busses is why I would swap around.
 
Zirias said:
Maybe not so silly .. no, I didn't try. I thought this was a thing from the past
Click to expand...

I had a Supermicro H8SCM (2013-ish?), and I remember various PCI Express cards working in some slots and not others; there was no obvious pattern to it. So every time I wanted to put a card in, I just played musical slots 'til I lucked out.

So yeah, for one reason or another, this still happens sometimes.

EDIT: I just remembered more about this. Some of the time, a card would actually appear to the operating system, and everything would look right, and yet it just wouldn't work. I remember this with a NIC; everything looked normal, but the NIC would only actually send and receive frames while it lived in a particular slot (it was a quality Intel NIC too).
 
Thanks guys ... so as a last resort, I'll try different slots and see whether MSI becomes available. Not today, I have to unmount this server from the rack :o But I will try, it's a last chance :) Otherwise, I'd have to either port the driver myself to FreeBSD (well, I know C ... haha) or really try to get a refund ... or, just sell this thing on ebay :o
 
Huh? I need MSI (or MSI-X) enabled, not disabled ;)

Meanwhile, I found the linuxkpi code in the Kernel, it seems to provide a linux-compatible PCI interface as well -- so maybe I'll have some luck getting the Linux driver to work on FreeBSD, then I wouldn't need to pass this card to a vm.
 
You must log in or register to reply here.
Back
Top