#camcontrol devlist
<ASUS DRW-1612BL 1.06> at scbus0 target 0 lun 0 (pass0,cd0)
perm cd0 0666
perm xpt0 0666
perm pass0 0666
# Commonly used by many ports
link acd0 cdrom
link acd0 dvd
link acd0 dvdr
link acd0 dvdrw
link acd0 cd
link acd0 cdr
link acd0 cdrw
mdma said:i was just lazy and didn't reboot after adding perm 0666 to devfs.conf
/dev# ll cd*
crw-rw-rw- 1 root operator 0, 84 27 апр 09:27 cd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:12 cdr -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:13 cdrom -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:12 cdrw -> acd0
/dev# ll dvd*
lrwxr-xr-x 1 root wheel 4 27 апр 13:10 dvd -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:10 dvdr -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:10 dvdrw -> acd0
arachnid said:nothing change brasero don't enable clear disk
# ll /dev/dvd*
lrwxr-xr-x 1 root wheel 3 27 апр 13:41 /dev/dvd -> cd0
lrwxr-xr-x 1 root wheel 3 27 апр 13:41 /dev/dvdr -> cd0
lrwxr-xr-x 1 root wheel 3 27 апр 13:41 /dev/dvdrw -> cd0
device atapicam
# Supports multiple backends: cdrtools, growisofs and libburn(optional).
Note: compiling against libburn is _not_enough. You need to activate the backend through GConf editor at "/apps/brasero/config/libburn_burn and /apps/brasero/config/libburn_iso"
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:404: Getting blanking flags for Disc
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:407: Blanking not possible: no media
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:587: Testing blanking caps for Disc
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:590: no media => no blanking possible
FBSDin20Steps said:For someone's interest... I have rebuilt brasero with libburn enabled and I've just finished my first burn with it.
Greetz
[X] NAUTILUS Enable Nautilus extension
[ ] LIBBURNIA Enable libburnia plug-ins
# sed '/#/d ; /^$/d' /usr/local/etc/cdrecord
CDR_DEVICE=mydev
CDR_FIFOSIZE=128m
mydev= 2,1,0 -1 128m burnfree
#
# cdrecord -scanbus
Cdrecord-Clone 2.01 (i386-unknown-freebsd8.0) Copyright (C) 1995-2004 J�rg Schilling
Using libscg version 'schily-0.8'.
scsibus2:
2,0,0 200) *
2,1,0 201) 'HL-DT-ST' 'DVD-RAM GSA-H20L' '1.00' Removable CD-ROM
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *
arachnid said:add - sorry once more - after add to gconf 2 keys - all ok
may be for other backend need keys too?