Hello colleagues!
I installed FreeBSD-11.0-CURRENT-arm-armv6-BANANAPI-20160408-r297692.img.xz on Banana Pi R1 (BPi-R1, http://bananapi.com/index.php/component/content/article?layout=edit&id=59) and I had a few problems.
The most important and fatal ones - FreeBSD kernel does not recognize network interfaces.
Here are the load listing from a TTL-serial console:
In the above listing shows that the initialization of the network device problems:
And, of course, the system detects only the network interface lo0:
How to resolve this issue with the network device?
In addition, when accessing the file system, sometimes there is a message:
What I do with the file system is not so?
Advance grateful for the answers.
Ogogon.
I installed FreeBSD-11.0-CURRENT-arm-armv6-BANANAPI-20160408-r297692.img.xz on Banana Pi R1 (BPi-R1, http://bananapi.com/index.php/component/content/article?layout=edit&id=59) and I had a few problems.
The most important and fatal ones - FreeBSD kernel does not recognize network interfaces.
Here are the load listing from a TTL-serial console:
Code:
[SERIAL/DIRECT] CONNECTED TO PORT /dev/cu.usbserial (115200-8N1)
***
*** CONNECT TO localhost
*** date 14.05.16
*** time 15:24:47
***
ю
U-Boot SPL 2015.04 (Apr 08 2016 - 06:36:29)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
U-Boot 2015.04 (Apr 08 2016 - 06:36:29) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: SUNXI SD/MMC: 0
reading u-boot.env
** Unable to read "u-boot.env" from mmc0:1 **
Using default environment
In: serial
Out: serial
Err: serial
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: dwmac.1c50000
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Booting from: mmc 0 ubldr
reading ubldr
262685 bytes read in 67 ms (3.7 MiB/s)
## Starting application at 0x42000094 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @0x7f235408
FreeBSD/armv6 U-Boot loader, Revision 1.2
(root@releng2.nyi.freebsd.org, Fri Apr 8 07:03:08 UTC 2016)
DRAM: 1024MB
MMC Device 1 not found
MMC Device 2 not found
MMC Device 3 not found
MMC Device 1 not found
Number of U-Boot devices: 3
U-Boot env: loaderdev='mmc 0'
Found U-Boot device: disk
Checking unit=1 slice=<auto> partition=<auto>... good.
Booting from disk1s2a:
/boot/kernel/kernel data=0x634ca4+0x12735c syms=[0x4+0x8acb0+0x4+0x9eae7]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Booting [/boot/kernel/kernel] in 8 seconds...
Booting [/boot/kernel/kernel] in 7 seconds...
Booting [/boot/kernel/kernel] in 6 seconds...
Booting [/boot/kernel/kernel] in 5 seconds...
Booting [/boot/kernel/kernel] in 4 seconds...
Booting [/boot/kernel/kernel] in 3 seconds...
Booting [/boot/kernel/kernel] in 2 seconds...
Booting [/boot/kernel/kernel] in 1 second...
Booting [/boot/kernel/kernel]...
/boot/dtb/bananapi.dtb size=0x80ef
Loaded DTB from file 'bananapi.dtb'.
Kernel entry at 0x0x42200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r297692: Fri Apr 8 07:10:09 UTC 2016
root@releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/A20 arm
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
CPU: Cortex A7 rev 4 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB enabled LABT branch prediction disabled
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 1073741824 (1024 MB)
avail memory = 1036029952 (988 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
aw_ccu0 on ofwbus0
aw_oscclk0: <Allwinner Oscillator Clock> mem 0x1c20050-0x1c20053 on aw_ccu0
clk_fixed0: <Fixed clock> on aw_ccu0
aw_pll0: <Allwinner PLL Clock> mem 0x1c20000-0x1c20003 on aw_ccu0
aw_pll1: <Allwinner PLL Clock> mem 0x1c20008-0x1c2000f on aw_ccu0
aw_pll2: <Allwinner PLL Clock> mem 0x1c20020-0x1c20023 on aw_ccu0
aw_pll3: <Allwinner PLL Clock> mem 0x1c20028-0x1c2002b on aw_ccu0
aw_cpuclk0: <Allwinner CPU Clock> mem 0x1c20054-0x1c20057 on aw_ccu0
aw_axiclk0: <Allwinner AXI Clock> mem 0x1c20054-0x1c20057 on aw_ccu0
aw_ahbclk0: <Allwinner AHB Clock> mem 0x1c20054-0x1c20057 on aw_ccu0
aw_gate0: <Allwinner AHB Clock Gates> mem 0x1c20060-0x1c20067 on aw_ccu0
aw_apbclk0: <Allwinner APB Clock> mem 0x1c20054-0x1c20057 on aw_ccu0
aw_gate1: <Allwinner APB0 Clock Gates> mem 0x1c20068-0x1c2006b on aw_ccu0
aw_apbclk1: <Allwinner APB Clock> mem 0x1c20058-0x1c2005b on aw_ccu0
aw_gate2: <Allwinner APB1 Clock Gates> mem 0x1c2006c-0x1c2006f on aw_ccu0
aw_modclk0: <Allwinner Module Clock> mem 0x1c20080-0x1c20083 on aw_ccu0
aw_modclk1: <Allwinner Module Clock> mem 0x1c20084-0x1c20087 on aw_ccu0
aw_mmcclk0: <Allwinner MMC Clock> mem 0x1c20088-0x1c2008b on aw_ccu0
aw_mmcclk1: <Allwinner MMC Clock> mem 0x1c2008c-0x1c2008f on aw_ccu0
aw_mmcclk2: <Allwinner MMC Clock> mem 0x1c20090-0x1c20093 on aw_ccu0
aw_mmcclk3: <Allwinner MMC Clock> mem 0x1c20094-0x1c20097 on aw_ccu0
aw_modclk2: <Allwinner Module Clock> mem 0x1c20098-0x1c2009b on aw_ccu0
aw_modclk3: <Allwinner Module Clock> mem 0x1c2009c-0x1c2009f on aw_ccu0
aw_modclk4: <Allwinner Module Clock> mem 0x1c200a0-0x1c200a3 on aw_ccu0
aw_modclk5: <Allwinner Module Clock> mem 0x1c200a4-0x1c200a7 on aw_ccu0
aw_modclk6: <Allwinner Module Clock> mem 0x1c200a8-0x1c200ab on aw_ccu0
aw_modclk7: <Allwinner Module Clock> mem 0x1c200ac-0x1c200af on aw_ccu0
aw_modclk8: <Allwinner Module Clock> mem 0x1c200b0-0x1c200b3 on aw_ccu0
aw_modclk9: <Allwinner Module Clock> mem 0x1c200b4-0x1c200b7 on aw_ccu0
aw_modclk10: <Allwinner Module Clock> mem 0x1c200c4-0x1c200c7 on aw_ccu0
aw_usbclk0: <Allwinner USB Clocks> mem 0x1c200cc-0x1c200cf on aw_ccu0
aw_modclk11: <Allwinner Module Clock> mem 0x1c200d4-0x1c200d7 on aw_ccu0
aw_gate3: <Allwinner DRAM Clock Gates> mem 0x1c20100-0x1c20103 on aw_ccu0
aw_codecclk0: <Allwinner CODEC Clock> mem 0x1c20140-0x1c20143 on aw_ccu0
clk_fixed1: <Fixed clock> on aw_ccu0
clk_fixed2: <Fixed clock> on aw_ccu0
aw_gmacclk0: <Allwinner Module Clock> mem 0x1c20164-0x1c20167 on aw_ccu0
clk_fixed3: <Fixed factor clock> on aw_ccu0
aw_pll4: <Allwinner PLL Clock> mem 0x1c20010-0x1c20013 on aw_ccu0
aw_pll5: <Allwinner PLL Clock> mem 0x1c20030-0x1c20033 on aw_ccu0
aw_hdmiclk0: <Allwinner HDMI Clock> mem 0x1c20150-0x1c20153 on aw_ccu0
aw_lcdclk0: <Allwinner LCD CH0 Clock> mem 0x1c20118-0x1c2011b on aw_ccu0
aw_lcdclk1: <Allwinner LCD CH1 Clock> mem 0x1c2012c-0x1c2012f on aw_ccu0
aw_debeclk0: <Allwinner Display Engine Backend Clock> mem 0x1c20104-0x1c20107 on aw_ccu0
simplebus0: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 10024 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c82fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 10055 on simplebus0
gic0: pn 0x10, arch 0x2, rev 0x1, implementer 0x43b irqs 160
generic_timer0: <ARMv7 Generic Timer> irq 10000,10001,10002,10003 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rtc0: <Allwinner RTC> mem 0x1c20d00-0x1c20d1f irq 10031 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
a10_sramc0: <Allwinner sramc module> mem 0x1c00000-0x1c0002f on simplebus0
a10dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 10007 on simplebus0
a10_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 10011 on simplebus0
mmc0: <MMC/SD bus> on a10_mmc0
awusbphy0: <Allwinner USB PHY> mem 0x1c13400-0x1c1340f,0x1c14800-0x1c14803,0x1c1c800-0x1c1c803 on simplebus0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c14000-0x1c140ff irq 10016 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ahci0: <Allwinner Integrated AHCI controller> mem 0x1c18000-0x1c18fff irq 10020 on simplebus0
ahci0: AHCI v1.10 with 1 3Gbps ports, Port Multiplier not supported
ahci0: quirks=0x2<NOPMP>
ahcich0: <AHCI channel> at channel 0 on ahci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff irq 10021 on simplebus0
usbus1: EHCI version 1.0
usbus1 on ehci1
gpioled0: <GPIO led> at pin 149 on gpiobus0
gpioc0: <GPIO controller> on gpio0
aw_wdog0: <Allwinner A10 Watchdog> mem 0x1c20c90-0x1c20c9f on simplebus0
pcm0: <Allwinner Audio Codec> mem 0x1c22c00-0x1c22c3f irq 10035 on simplebus0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 10037 on simplebus0
uart0: console (115384,n,8,1)
uart1: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 10040 on simplebus0
uart2: <16750 or compatible> mem 0x1c29c00-0x1c29fff irq 10044 on simplebus0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2ac00-0x1c2afff irq 10045 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
axp209_pmu0: <X-Power AXP209 Power Management Unit> at addr 0x68 irq 10058 on iicbus0
iichb1: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b400-0x1c2b7ff irq 10047 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
dwc0: <A20 Gigabit Ethernet Controller> mem 0x1c50000-0x1c5ffff irq 10050 on simplebus0
dwc0: Can't reset DWC.
device_attach: dwc0 attach returned 6
a10hdmi0: <Allwinner HDMI TX> mem 0x1c16000-0x1c16fff on simplebus0
pcm1: <Allwinner HDMI Audio> on simplebus0
fb0: <Allwinner Framebuffer> mem 0x1e60000-0x1e6ffff,0x1c0c000-0x1c0cfff on simplebus0
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Allwinner> at usbus1
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Allwinner> at usbus0
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 16GB <SDHC 0000 0.0 SN 0001130F MFG 07/2014 by 0 0x0000> at mmc0 50.0MHz/4bit/65535-block
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
Setting hostuuid: 248aac58-1dd2-11b2-a3b4-b7bcc1a39a7a.
Setting hostid: 0x36af2ee4.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 3569037 free (213 frags, 446103 blocks, 0.0% fragmentation)
ugen1.2: <vendor 0x0bda> at usbus1
Mounting local file systems:.
Setting hostname: a20.
Setting up harvesting:[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy:random: unblocking device.
.
Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
Starting devd.
urtwn0: <vendor 0x0bda product 0x8178, class 0/0, rev 2.00/2.00, addr 2> on usbus1
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
urtwn0: enabling 11n
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Performing sanity check on sshd configuration.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting sshd.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting cron.
Starting background file system checks in 60 seconds.
Thu Jan 1 00:00:39 UTC 1970
FreeBSD/arm (a20) (ttyu0)
login: dwc0: <A20 Gigabit Ethernet Controller> mem 0x1c50000-0x1c5ffff irq 10050 on simplebus0
dwc0: Can't reset DWC.
device_attach: dwc0 attach returned 6And, of course, the system detects only the network interface lo0:
Code:
root@a20:~ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@a20:How to resolve this issue with the network device?
In addition, when accessing the file system, sometimes there is a message:
Code:
lock order reversal:
1st 0xc4243034 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1222
2nd 0xc40bd814 syncer (syncer) @ /usr/src/sys/kern/vfs_subr.c:2639
stack backtrace:What I do with the file system is not so?
Advance grateful for the answers.
Ogogon.
