Hi,
I got some weird thing going here and can't find help. I have a net5501 that uses sata disk. Its disk just died after running OK FreeBSD 11.1-R. When I updated it using svnlite and make buildworkd and buildkernel it never could boot again. So I changed the disk and installed vanilla 11.2-R i386 on another SATA disk and boots fine. To make it serial enabled I use the option after install and change /etc/ttys, add console="comconsole" on /boot/loader.conf and use the line:
boot0cfg -Bv -b /boot/boot0sio da0
This first SATA disk all went fine. So I decided to use an Intel SSD 330 Series. All steps above were repeated and when I try to boot it gets stuck in the same place the dead disk stopped:
Now I don't know how to solve this. I believe the issue is on boot process, but I don't know how to deep further here. If anyone could help. Thanks,
none
I got some weird thing going here and can't find help. I have a net5501 that uses sata disk. Its disk just died after running OK FreeBSD 11.1-R. When I updated it using svnlite and make buildworkd and buildkernel it never could boot again. So I changed the disk and installed vanilla 11.2-R i386 on another SATA disk and boots fine. To make it serial enabled I use the option after install and change /etc/ttys, add console="comconsole" on /boot/loader.conf and use the line:
boot0cfg -Bv -b /boot/boot0sio da0
This first SATA disk all went fine. So I decided to use an Intel SSD 330 Series. All steps above were repeated and when I try to boot it gets stuck in the same place the dead disk stopped:
Code:
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy
comBIOS ver. 1.33c 20080626 Copyright (C) 2000-2008 Soekris Engineering.
net5501
0512 Mbyte Memory CPU Geode LX 500 Mhz
Pri Sla INTEL SSDSC2CT240A3 LBA Xlt 1024-255-63 134 Gbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:14:0 168C 0013 02000001 0116 0290 08 40 00 A0010000 00000000 10
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0020000 00000000 15
0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0021000 00000000 15
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
Keyboard: no
//bboooott//ccoonnffiigg:: --hh --PP
0
y
1
)
/
'
.
O
Now I don't know how to solve this. I believe the issue is on boot process, but I don't know how to deep further here. If anyone could help. Thanks,
none