Hello,
I've been happily running FreeBSD 11.1-RELEASE-p4 (GENERIC) on my home server for some time and decided to upgrade the CPU on this system. The hardware configuration was;
GA-M68MT-S2P (rev. 3.0) Motherboard
AMD Athlon II X2 250 CPU
Again, this had been running just fine.
I upgraded the above CPU to an AMD Phenom II X6 1045T just today, and that is when I hit a snag. The system hangs during boot. In verbose mode the last console logs are;
For reference, I can boot this system into Windows, so I do not suspect it's a hardware issue per se.
I have tried selecting safe boot from the boot menu, but that yielded the same result. Any help in troubleshooting this issue would be much appreciated.
I've been happily running FreeBSD 11.1-RELEASE-p4 (GENERIC) on my home server for some time and decided to upgrade the CPU on this system. The hardware configuration was;
GA-M68MT-S2P (rev. 3.0) Motherboard
AMD Athlon II X2 250 CPU
Again, this had been running just fine.
I upgraded the above CPU to an AMD Phenom II X6 1045T just today, and that is when I hit a snag. The system hangs during boot. In verbose mode the last console logs are;
acpi0: <GBT NVDAACPI> on motherboard
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
PCIe: Memory Mapped configuration base @ 0xe0000000
For reference, I can boot this system into Windows, so I do not suspect it's a hardware issue per se.
I have tried selecting safe boot from the boot menu, but that yielded the same result. Any help in troubleshooting this issue would be much appreciated.