root@unix:/usr/home/user # dmesg | grep -C 10 "no driver attached"
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e20000-0xf7e203ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7e18000-0xf7e1bfff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR9485> mem 0xf7d00000-0xf7d7ffff irq 17 at device 0.0 on pci2
ar9300_set_stub_functions: setting stub functions
--
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 64.4
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e1f000-0xf7e1f3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e1e000-0xf7e1e7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_lid0: <Control Method Lid Switch> on acpi0
--
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e20000-0xf7e203ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7e18000-0xf7e1bfff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR9485> mem 0xf7d00000-0xf7d7ffff irq 17 at device 0.0 on pci2
ar9300_set_stub_functions: setting stub functions
--
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 3276.13
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e1f000-0xf7e1f3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e1e000-0xf7e1e7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_lid0: <Control Method Lid Switch> on acpi0
--
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e20000-0xf7e203ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7e18000-0xf7e1bfff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR9485> mem 0xf7d00000-0xf7d7ffff irq 17 at device 0.0 on pci2
ar9300_set_stub_functions: setting stub functions
--
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 2457.9
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e1f000-0xf7e1f3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e1e000-0xf7e1e7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_lid0: <Control Method Lid Switch> on acpi0
root@unix:/usr/home/user #