Hi all,
I have an Apple MacBook Pro 13" mid-2010 with FreeBSD 13.1 patch 2 installed.
I am trying to use it with my Apple iPhone 7 Plus (iOS 15.7, can't go higher) in order to get Internet through tethering.
My steps so far:
1. I added
The driver is indeed loaded at launch and the machine knows when I connect or disconnect my iPhone.
2. When I try
3. So I use usbconfig:
4. Then
If I try a
Tethering works fine with this iPhone on macOS with the same computer or other computers, so I believe this should configuration problem, but I am clueless about what to try next.
Any help will be appreciated.
I have an Apple MacBook Pro 13" mid-2010 with FreeBSD 13.1 patch 2 installed.
I am trying to use it with my Apple iPhone 7 Plus (iOS 15.7, can't go higher) in order to get Internet through tethering.
My steps so far:
1. I added
if_ipheth_load="YES"
to my /boot/loader.conf file.The driver is indeed loaded at launch and the machine knows when I connect or disconnect my iPhone.
2. When I try
# dhclient ue0
, it doesn't work, no ue0 device found.3. So I use usbconfig:
# usbconfig -d 3.3 set_config 3
, which returns:
Code:
ipeth0 on uhub0
ipeth0: <Apple Inc. iPhone, class 0/0, rev 2.00/9.04, add 3> on usbus3
4. Then
# dhclient ue0
again, which gives me:
Code:
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
No working leases in permanent database - sleeping.
If I try a
ifconfig
command, I get:
Code:
ue0 flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 Stu 1500
ether 72:f0:87:ee:db:b6
net 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Tethering works fine with this iPhone on macOS with the same computer or other computers, so I believe this should configuration problem, but I am clueless about what to try next.
Any help will be appreciated.