Xfce Another post about a broken XFCE4, perhaps?

freezr · 2025-12-07T19:49:00+0000

I would add proc /proc procfs rw 0 0 to your /etc/fstab/ and try with a fresh user to test if the problem is actually because of XFCE or some old settings.

Majestio · 2025-12-07T19:57:56+0000

freezr said:
I would add proc /proc procfs rw 0 0 to your /etc/fstab/ and try with a fresh user to test if the problem is actually because of XFCE or some old settings.

I have this, I do it all the time.

Code:

[majestio@freebsd-pc ~] $ cat /etc/fstab
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/da0p2              none    swap    sw              0       0
proc /proc procfs rw 0 0

freezr · 2025-12-08T05:17:52+0000

Have you tested XFCE with a fresh new user?

Sometimes I had issue with XFCE on both Linux and FreeBSD moving toward a new upgrade.
If with the new user works than you must double check your settings, this is at least can tell you if actually the problem is within XFCE.

Majestio · 2025-12-08T05:24:51+0000

freezr said:
Have you tested XFCE with a fresh new user?

Sometimes I had issue with XFCE on both Linux and FreeBSD moving toward a new upgrade.
If with the new user works than you must double check your settings, this is at least can tell you if actually the problem is within XFCE.

Yeah, I tested it. I created the Test user and still the same problem.

Majestio · 2025-12-08T05:37:45+0000

I don't have the ability to understand the code yet, but I think it's possible. I took screen shots of the process of booting xfce4, invoking desktop settings and shutting down X. This is what I got:

freezr · 2025-12-08T05:38:23+0000

Did you already check into .xsession-errors ?
How do you start XFCE?

Majestio · 2025-12-08T05:40:15+0000

freezr said:
Did you already check into .xsession-errors ?
How do you start XFCE?

I don't have such a file created.

startx

Code:

cat .xinitrc
exec startxfce4

freezr · 2025-12-08T05:50:35+0000

Majestio said:
I don't have such a file created.

startx is not right way to start XFCE...

Do you use one of these method?

Chapter 8. Desktop Environments

This chapter demonstrates how to install numerous desktop environments, including web browsers, productivity software, document viewers, and financial software

docs.freebsd.org

Majestio · 2025-12-08T05:56:24+0000

freezr said:
startx is not right way to start XFCE...

This is where I disagree. I don't always need X, so I run it with startx as needed. Again, this is how things worked great in FreeBSD 13.x with then xfce 4.18.

I just don't need lightdm, moreover, I'm pretty sure it's not the issue.

Majestio · 2025-12-08T06:06:16+0000

Just in case I checked, I did as in the documentation:

A second method to start XFCE is by manually invoking startx(1). For this to work, the following line is needed in ~/.xinitrc

Code:

echo '. /usr/local/etc/xdg/xfce4/xinitrc' > ~/.xinitrc

Then I ran X again - same situation, nothing changed.

freezr · 2025-12-08T06:09:03+0000

You may try with startxfce4

Use startxfce4 to start an Xfce session or choose Xfce Session from the login manager, which includes the session manager, the panel, the window manager and the desktop manager. See auto login from console for more information.

Click to expand...

xfce:getting-started [Xfce Docs]

docs.xfce.org

Majestio · 2025-12-08T06:23:27+0000

freezr said:
You may try with startxfce4

Yeah, I've been doing that for a long time. Since I started using xfce, if I'm not mistaken since FreeBSD 9.0.

Majestio · 2025-12-08T06:44:33+0000

Yes, I also tried uninstalling xf86-video-vmware, and configuring /etc/xorg.conf for vesa. The problem persisted. Put it all back.

T-Daemon · 2025-12-08T07:32:10+0000

Does running xfdesktop-settings in an xterminal show something? Check also ~/.xsession-errors.

Start the xorg session by startx, redirect output into a file, examine file ( startx >& xorg.log ).

Majestio · 2025-12-08T08:47:25+0000

Well I installed lightdm, and now I have the ~/.session-errors file:

Code:

xrdb:  "Xft.hinting" on line 9 overrides entry on line 5
xrdb:  "Xft.hintstyle" on line 12 overrides entry on line 6
libxfce4windowing-Message: 10:53:02.772: Failed to fetch _NET_NUMBER_OF_DESKTOPS; assuming 1
libxfce4windowing-Message: 10:53:02.773: Failed to get _NET_WORKAREA; using full screen dimensions
libxfce4windowing-Message: 10:53:02.773: Failed to fetch _NET_CURRENT_DESKTOP; assuming 0
libxfce4windowing-Message: 10:53:02.773: Failed to fetch _NET_CURRENT_DESKTOP; assuming 0
/usr/local/bin/iceauth:  creating new authority file /var/run/user/1001/ICEauthority
libxfce4windowing-Message: 10:53:02.966: Failed to fetch _NET_CURRENT_DESKTOP; assuming 0
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)

(xfwm4:2628): xfwm4-WARNING **: 10:53:03.158: Unsupported GL renderer (llvmpipe (LLVM 19.1.7, 256 bits)).

(xfsettingsd:2631): xfsettingsd-WARNING **: 10:53:03.312: Unknown mode '1918x1042 @ 0.00' for output default, aborting.
vmware-user: could not open /var/run/vmblock
Xlib:  extension "DPMS" missing on display ":0.0".

(xfce4-power-manager:2643): xfce4-power-manager-WARNING **: 10:53:03.917: Display is not DPMS capable

(vmware-user:2644): Gtk-WARNING **: 10:53:04.022: gtk_disable_setlocale() must be called before gtk_init()
Xlib:  extension "DPMS" missing on display ":0".

opt4951 · 2025-12-08T15:03:29+0000

So I googled 'avx512pf' -- that's a reference to a CPU instruction set:

AVX512PF (Advanced Vector Extensions 512 Prefetch) is a specific CPU instruction set extension used for high-performance computing tasks, primarily associated with the first generation of Intel Xeon Phi processors (Knights Landing).

I guess your CPU does not support it.

Just curious, is your screen capable of 1918x1042? That's non-standard -- which is what the warning is saying. Maybe try 800x600 just to get past the warning.

DPMS -- your system does not support it apparently. But you are in VMWare, so maybe that's a correct warning. Can you try turning off this feature, if possible?

I don't think any of this has a bearing on the original error of '...AccountService (null)' -- which is triggered when you try to change your background. And for the record, I am using XFCE 4.20 on bare metal and I don't have this issue. I'm actually using a program called 'Variety' that changes my background every five minutes.

Majestio · 2025-12-08T15:45:00+0000

Briefly about my CPU and screen resolution:

This is the resolution VMWare sets when "Autofit Guest". I turned off DPMS and it didn't get any easier.

Code:

xrdb:  "Xft.hinting" on line 9 overrides entry on line 5
xrdb:  "Xft.hintstyle" on line 12 overrides entry on line 6
libxfce4windowing-Message: 18:43:17.234: Failed to fetch _NET_NUMBER_OF_DESKTOPS; assuming 1
libxfce4windowing-Message: 18:43:17.235: Failed to get _NET_WORKAREA; using full screen dimensions
libxfce4windowing-Message: 18:43:17.235: Failed to fetch _NET_CURRENT_DESKTOP; assuming 0
libxfce4windowing-Message: 18:43:17.235: Failed to fetch _NET_CURRENT_DESKTOP; assuming 0
/usr/local/bin/iceauth:  creating new authority file /var/run/user/1001/ICEauthority
libxfce4windowing-Message: 18:43:17.554: Failed to fetch _NET_CURRENT_DESKTOP; assuming 0
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)
'-avx512er' is not a recognized feature for this target (ignoring feature)
'-avx512pf' is not a recognized feature for this target (ignoring feature)

(xfwm4:1685): xfwm4-WARNING **: 18:43:17.898: Unsupported GL renderer (llvmpipe (LLVM 19.1.7, 256 bits)).

(xfsettingsd:1688): xfsettingsd-WARNING **: 18:43:18.130: Unknown mode '1918x1042 @ 0.00' for output default, aborting.
Xlib:  extension "DPMS" missing on display ":0.0".

(xfce4-power-manager:1704): xfce4-power-manager-WARNING **: 18:43:19.058: Display is not DPMS capable

(vmware-user:1703): Gtk-WARNING **: 18:43:19.237: gtk_disable_setlocale() must be called before gtk_init()
Xlib:  extension "DPMS" missing on display ":0".
Xlib:  extension "DPMS" missing on display ":0".

freezr · 2025-12-08T17:39:34+0000

I had an issue related to your cause I moved my OS from Devuan to FreeBSD and XFdesktop was complaining about a missing folder, but to fix it I had to overwrite the position through the settings-editor.

If you change the settings from the settings-editor, are you still continuing to get that error?
What directory are you trying to open? Did you check if this exist?

T-Daemon · 2025-12-08T18:22:21+0000

Majestio said:
(xfwm4:1685): xfwm4-WARNING **: 18:43:17.898: Unsupported GL renderer (llvmpipe (LLVM 19.1.7, 256 bits)).

I believe this has to do with the llvmpipe GL renderer. I can see the same .xsession-errors message with the x11-drivers/xf86-video-scfb driver when logged in from lightdm, and xfdesktop-setting presents itself with the "Unable to load images from folder "(nul)"" pop-up dialog window.

Check these out:

[SOLVED] Arch Linux in VMWare VM uses LLVMPIPE for OpenGL renderer / Kernel & Hardware / Arch Linux Forums

bbs.archlinux.org

The OpenGL renderer in VMware Workstation 16.2.x+ no longer works with VirtualGL · Issue #248 · VirtualGL/virtualgl

VMware Workstation v15.5 and later uses a GPU sandbox process that translates OpenGL commands from the guest into either Vulkan or OpenGL commands and forwards them to the GPU in the host. Starting...

github.com

Post /var/log/Xorg.0.log.

Alternatively use another wallpaper changer, or perhaps use VirtualBox, with the guest additions installed, instead, no problem here setting the background.

T-Daemon · 2025-12-08T18:36:24+0000

Majestio said:
(xfwm4:1685): xfwm4-WARNING **: 18:43:17.898: Unsupported GL renderer (llvmpipe (LLVM 19.1.7, 256 bits)).

T-Daemon said:
I believe this has to do with the llvmpipe GL renderer. I can see the same .xsession-errors message with the x11-drivers/xf86-video-scfb driver when logged in from lightdm

I spoke to soon, I see that error with the vboxvideo driver running the guest in VirtualBox as well, the background can be set, though.

Majestio · 2025-12-08T20:08:52+0000

Part 1

Code:

X.Org X Server 1.21.1.20
X Protocol Version 11, Revision 0
[    21.722] Current Operating System: FreeBSD freebsd-pc 15.0-RELEASE FreeBSD 15.0-RELEASE releng/15.0-n280995-7aedc8de6446 GENERIC amd64
[    21.722]
[    21.722] Current version of pixman: 0.46.2
[    21.722]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    21.722] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.722] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  8 18:57:20 2025
[    21.722] (==) Using config file: "/etc/X11/xorg.conf"
[    21.722] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[    21.722] (==) ServerLayout "XFree86 Configured"
[    21.722] (**) |-->Screen "Screen0" (0)
[    21.722] (**) |   |-->Monitor "vmware"
[    21.722] (**) |   |-->Device "VMware SVGA"
[    21.722] (**) |-->Input Device "Mouse0"
[    21.722] (**) |-->Input Device "Keyboard0"
[    21.722] (**) Allowing byte-swapped clients
[    21.722] (==) Automatically adding devices
[    21.722] (==) Automatically enabling devices
[    21.722] (==) Automatically adding GPU devices
[    21.722] (==) Automatically binding GPU devices
[    21.722] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.732] (WW) The directory "/usr/local/share/fonts/programmer/" does not exist.
[    21.732]    Entry deleted from font path.
[    21.732] (WW) The directory "/usr/local/share/fonts/roboto-fonts-ttf/" does not exist.
[    21.732]    Entry deleted from font path.
[    21.742] (**) FontPath set to:
        /usr/local/share/fonts/dejavu/,
        /usr/local/share/fonts/jetbrains-mono,
        /usr/local/share/fonts/Liberation/,
        /usr/local/share/fonts/cyrillic/,
        /usr/local/share/fonts/misc/,
        /usr/local/share/fonts/OTF/,
        /usr/local/share/fonts/TTF/,
        /usr/local/share/fonts/Type1/,
        /usr/local/share/fonts/75dpi/,
        /usr/local/share/fonts/100dpi/,
        /usr/local/share/fonts/misc/,
        /usr/local/share/fonts/TTF/,
        /usr/local/share/fonts/OTF/,
        /usr/local/share/fonts/Type1/,
        /usr/local/share/fonts/100dpi/,
        /usr/local/share/fonts/75dpi/,
        catalogue:/usr/local/etc/X11/fontpath.d
[    21.742] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[    21.742] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    21.742] (WW) Disabling Mouse0
[    21.742] (II) Module ABI versions:
[    21.742]    X.Org ANSI C Emulation: 0.4
[    21.742]    X.Org Video Driver: 25.2
[    21.742]    X.Org XInput driver : 24.4
[    21.742]    X.Org Server Extension : 10.0
[    21.742] (--) PCI:*(0@0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/65536
[    21.742] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    21.742] (II) LoadModule: "glx"
[    21.742] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[    21.762] (II) Module glx: vendor="X.Org Foundation"
[    21.762]    compiled for 1.21.1.20, module version = 1.0.0
[    21.762]    ABI class: X.Org Server Extension, version 10.0
[    21.762] (II) LoadModule: "record"
[    21.762] (II) Module "record" already built-in
[    21.762] (II) LoadModule: "vmware"
[    21.762] (II) Loading /usr/local/lib/xorg/modules/drivers/vmware_drv.so
[    22.422] (II) Module vmware: vendor="X.Org Foundation"
[    22.422]    compiled for 1.21.1.20, module version = 13.3.0
[    22.422]    Module class: X.Org Video Driver
[    22.422]    ABI class: X.Org Video Driver, version 25.2
[    22.422] (II) LoadModule: "evdev"
[    22.422] (WW) Warning, couldn't open module evdev
[    22.422] (EE) Failed to load module "evdev" (module does not exist, 0)
[    22.422] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[    22.422] (--) Using syscons driver with X support (version 2.0)
[    22.422] (++) using VT number 9

[    22.442] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    22.442] (II) vmware(0): Creating default Display subsection in Screen section
        "Screen0" for depth/fbbpp 24/32
[    22.442] (EE) vmware(0): Failed to open drm.
[    22.442] (WW) vmware(0): Disabling 3D support.
[    22.442] (WW) vmware(0): Disabling Render Acceleration.
[    22.442] (WW) vmware(0): Disabling RandR12+ support.
[    22.442] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071)
[    22.442] (II) Loading sub module "vgahw"
[    22.442] (II) LoadModule: "vgahw"
[    22.442] (II) Loading /usr/local/lib/xorg/modules/libvgahw.so
[    22.442] (II) Module vgahw: vendor="X.Org Foundation"
[    22.442]    compiled for 1.21.1.20, module version = 0.1.0
[    22.442]    ABI class: X.Org Video Driver, version 25.2
[    22.462] (--) vmware(0): caps:  0xFDFFC3E2
[    22.462] (--) vmware(0): depth: 24
[    22.462] (--) vmware(0): bpp:   32
[    22.462] (--) vmware(0): vram:  134217728
[    22.462] (--) vmware(0): pbase: 0xe8000000
[    22.462] (--) vmware(0): mwidt: 6688
[    22.462] (--) vmware(0): mheig: 5016
[    22.462] (--) vmware(0): depth: 24
[    22.462] (--) vmware(0): bpp:   32
[    22.462] (--) vmware(0): w.red: 8
[    22.462] (--) vmware(0): w.grn: 8
[    22.462] (--) vmware(0): w.blu: 8
[    22.462] (--) vmware(0): vis:   4
[    22.462] (**) vmware(0): Depth 24, (--) framebuffer bpp 32
[    22.462] (==) vmware(0): RGB weight 888
[    22.462] (==) vmware(0): Default visual is TrueColor
[    22.462] (==) vmware(0): Using HW cursor
[    22.462] (==) vmware(0): Will set up a driver mode with dimensions 1280x768.
[    22.462] (==) vmware(0): Using gamma correction (1.0, 1.0, 1.0)
[    22.462] (II) vmware(0): Clock range:   0.00 to 400000.00 MHz
[    22.462] (II) vmware(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1600x1200" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1792x1344" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1856x1392" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1920x1440" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1920x1440" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "2048x1536" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "2048x1536" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x360" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x360" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "720x405" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "720x405" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "864x486" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "960x540" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "480x270" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "480x270" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "512x288" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "512x288" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1280x720" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1368x768" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "684x384" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "684x384" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1600x900" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "800x450" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "800x450" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "2048x1152" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "1024x576" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1024x576" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "2560x1440" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "2880x1620" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "3200x1800" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "3200x1800" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "3840x2160" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "3840x2160" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "4096x2304" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "4096x2304" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "5120x2880" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "5120x2880" (hsync out of range)
[    22.462] (II) vmware(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "7680x4320" (width requires unsupported line pitch)
[    22.462] (II) vmware(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "7680x4320" (width requires unsupported line pitch)
[    22.462] (II) vmware(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "15360x8640" (insufficient memory for mode)
[    22.462] (II) vmware(0): Not using default mode "7680x4320" (width requires unsupported line pitch)
[    22.462] (II) vmware(0): Not using default mode "15360x8640" (insufficient memory for mode)
[    22.462] (II) vmware(0): Not using default mode "7680x4320" (width requires unsupported line pitch)
[    22.462] (II) vmware(0): Not using default mode "1280x800" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1400x900" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "700x450" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "700x450" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "2560x1600" (monitor doesn't support reduced blanking)
[    22.462] (II) vmware(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[    22.462] (II) vmware(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)

Majestio · 2025-12-08T20:11:21+0000

Part 2

Code:

[    22.462] (II) vmware(0): Virtual size is 1280x768 (pitch 6688)
[    22.462] (**) vmware(0): *Driver mode "vmwlegacy-default-1280x768": 69.2 MHz, 43.2 kHz, 56.0 Hz
[    22.462] (II) vmware(0): Modeline "vmwlegacy-default-1280x768"x56.0   69.17  1280 1281 1282 1602  768 769 770 771 (43.2 kHz ez)
[    22.462] (**) vmware(0):  Default mode "2880x1620": 396.2 MHz, 100.7 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "2880x1620"x60.0  396.25  2880 3096 3408 3936  1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[    22.462] (**) vmware(0):  Default mode "2560x1600": 348.5 MHz, 99.5 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "2560x1600"x60.0  348.50  2560 2760 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "2560x1440": 312.2 MHz, 89.5 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "2560x1440"x60.0  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "2048x1536": 266.9 MHz, 95.3 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    22.462] (**) vmware(0):  Default mode "1920x1440": 234.0 MHz, 90.0 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1856x1392": 218.3 MHz, 86.4 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    22.462] (**) vmware(0):  Default mode "1792x1344": 204.8 MHz, 83.7 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    22.462] (**) vmware(0):  Default mode "2048x1152": 197.0 MHz, 71.6 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[    22.462] (**) vmware(0):  Default mode "1920x1200": 193.2 MHz, 74.6 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[    22.462] (**) vmware(0):  Default mode "1920x1080": 173.0 MHz, 67.2 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    22.462] (**) vmware(0):  Default mode "1600x1200": 202.5 MHz, 93.8 kHz, 75.0 Hz
[    22.462] (II) vmware(0): Modeline "1600x1200"x75.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz d)
[    22.462] (**) vmware(0):  Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
[    22.462] (II) vmware(0): Modeline "1600x1200"x70.0  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (87.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "1600x1200": 175.5 MHz, 81.2 kHz, 65.0 Hz
[    22.462] (II) vmware(0): Modeline "1600x1200"x65.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[    22.462] (**) vmware(0):  Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    22.462] (**) vmware(0):  Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
[    22.462] (II) vmware(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "1600x900": 118.2 MHz, 56.0 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
[    22.462] (II) vmware(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[    22.462] (II) vmware(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1400x900": 103.5 MHz, 56.0 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
[    22.462] (II) vmware(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1368x768": 85.2 MHz, 47.8 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x800": 83.5 MHz, 49.7 kHz, 59.8 Hz
[    22.462] (II) vmware(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    22.462] (**) vmware(0):  Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[    22.462] (II) vmware(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "1280x720": 74.5 MHz, 44.8 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    22.462] (**) vmware(0):  Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
[    22.462] (II) vmware(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz d)
[    22.462] (**) vmware(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[    22.462] (II) vmware(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz d)
[    22.462] (**) vmware(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[    22.462] (II) vmware(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[    22.462] (II) vmware(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    22.462] (**) vmware(0):  Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[    22.462] (II) vmware(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz d)
[    22.462] (**) vmware(0):  Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz
[    22.462] (II) vmware(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
[    22.462] (II) vmware(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz d)
[    22.462] (**) vmware(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[    22.462] (II) vmware(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[    22.462] (II) vmware(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz d)
[    22.462] (**) vmware(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[    22.462] (II) vmware(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[    22.462] (II) vmware(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    22.462] (**) vmware(0):  Default mode "864x486": 32.5 MHz, 30.3 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    22.462] (**) vmware(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
[    22.462] (II) vmware(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz d)
[    22.462] (**) vmware(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[    22.462] (II) vmware(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[    22.462] (II) vmware(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[    22.462] (II) vmware(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    22.462] (**) vmware(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
[    22.462] (II) vmware(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
[    22.462] (II) vmware(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz d)
[    22.462] (**) vmware(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
[    22.462] (II) vmware(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz d)
[    22.462] (==) vmware(0): DPI set to (96, 96)
[    22.462] (II) Loading sub module "fb"
[    22.462] (II) LoadModule: "fb"
[    22.462] (II) Module "fb" already built-in
[    22.462] (II) Loading sub module "shadowfb"
[    22.462] (II) LoadModule: "shadowfb"
[    22.462] (II) Loading /usr/local/lib/xorg/modules/libshadowfb.so
[    22.462] (II) Module shadowfb: vendor="X.Org Foundation"
[    22.462]    compiled for 1.21.1.20, module version = 1.0.0
[    22.462]    ABI class: X.Org ANSI C Emulation, version 0.4
[    22.462] (II) Loading sub module "ramdac"
[    22.462] (II) LoadModule: "ramdac"
[    22.462] (II) Module "ramdac" already built-in
[    22.462] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[    22.462] (II) vmware(0): Initialized VMware Xinerama extension.
[    22.462] (II) vmware(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    22.502] (==) vmware(0): Backing store enabled
[    22.502] (==) vmware(0): Silken mouse enabled
[    22.502] (II) vmware(0): Initialized VMware Xv extension successfully.
[    22.502] (II) Initializing extension Generic Event Extension
[    22.502] (II) Initializing extension SHAPE
[    22.502] (II) Initializing extension MIT-SHM
[    22.502] (II) Initializing extension XInputExtension
[    22.502] (II) Initializing extension XTEST
[    22.502] (II) Initializing extension BIG-REQUESTS
[    22.502] (II) Initializing extension SYNC
[    22.502] (II) Initializing extension XKEYBOARD
[    22.502] (II) Initializing extension XC-MISC
[    22.502] (II) Initializing extension SECURITY
[    22.502] (II) Initializing extension XFIXES
[    22.502] (II) Initializing extension RENDER
[    22.502] (II) Initializing extension RANDR
[    22.502] (II) Initializing extension COMPOSITE
[    22.502] (II) Initializing extension DAMAGE
[    22.502] (II) Initializing extension MIT-SCREEN-SAVER
[    22.502] (II) Initializing extension DOUBLE-BUFFER
[    22.502] (II) Initializing extension RECORD
[    22.502] (II) Initializing extension DPMS
[    22.502] (II) Initializing extension Present
[    22.502] (II) Initializing extension DRI3
[    22.502] (II) Initializing extension X-Resource
[    22.502] (II) Initializing extension XVideo
[    22.502] (II) Initializing extension XVideo-MotionCompensation
[    22.502] (II) Initializing extension GLX
[    22.502] (II) AIGLX: Screen 0 is not DRI2 capable
[    22.602] (II) IGLX: Loaded and initialized swrast
[    22.602] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    22.602] (II) Initializing extension XFree86-VidModeExtension
[    22.602] (II) Initializing extension XFree86-DGA
[    22.602] (II) Initializing extension XFree86-DRI
[    22.602] (II) Initializing extension DRI2
[    22.782] (II) LoadModule: "evdev"
[    22.782] (WW) Warning, couldn't open module evdev
[    22.782] (EE) Failed to load module "evdev" (module does not exist, 0)
[    22.782] (EE) No input driver matching `evdev'
[    22.782] (II) Falling back to input driver `libinput'
[    22.782] (II) LoadModule: "libinput"
[    22.782] (II) Loading /usr/local/lib/xorg/modules/input/libinput_drv.so
[    22.792] (II) Module libinput: vendor="X.Org Foundation"
[    22.792]    compiled for 1.21.1.20, module version = 1.3.0
[    22.792]    Module class: X.Org XInput Driver
[    22.792]    ABI class: X.Org XInput driver, version 24.4
[    22.792] (II) Using input driver 'libinput' for 'Keyboard0'
[    22.792] (**) Option "CoreKeyboard"
[    22.792] (**) Keyboard0: always reports core events
[    22.792] (EE) PreInit returned 2 for "Keyboard0"
[    22.792] (II) UnloadModule: "libinput"
[    22.802] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event0)
[    22.802] (**) System keyboard multiplexer: Applying InputClass "Evdev keyboard"
[    22.802] (**) System keyboard multiplexer: Applying InputClass "libinput keyboard catchall"
[    22.802] (II) Using input driver 'libinput' for 'System keyboard multiplexer'
[    22.802] (**) System keyboard multiplexer: always reports core events
[    22.802] (**) Option "Device" "/dev/input/event0"
[    22.822] (II) event0  - System keyboard multiplexer: is tagged by udev as: Keyboard
[    22.822] (II) event0  - System keyboard multiplexer: device is a keyboard
[    22.822] (II) event0  - System keyboard multiplexer: device removed
[    22.822] (**) Option "config_info" "udev:/dev/input/event0"
[    22.822] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 6)
[    22.822] (**) Option "xkb_rules" "evdev"
[    22.862] (II) event0  - System keyboard multiplexer: is tagged by udev as: Keyboard
[    22.862] (II) event0  - System keyboard multiplexer: device is a keyboard
[    22.862] (II) config/udev: Adding input device System mouse (/dev/input/event1)
[    22.862] (**) System mouse: Applying InputClass "libinput pointer catchall"
[    22.862] (II) Using input driver 'libinput' for 'System mouse'
[    22.862] (**) System mouse: always reports core events
[    22.862] (**) Option "Device" "/dev/input/event1"
[    22.862] (II) event1  - System mouse: is tagged by udev as: Mouse
[    22.862] (II) event1  - System mouse: device is a pointer
[    22.862] (II) event1  - System mouse: device removed
[    22.862] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.862] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.862] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.862] (**) Option "config_info" "udev:/dev/input/event1"
[    22.862] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 7)
[    22.862] (**) Option "AccelerationScheme" "none"
[    22.862] (**) System mouse: (accel) selected scheme none/0
[    22.862] (**) System mouse: (accel) acceleration factor: 2.000
[    22.862] (**) System mouse: (accel) acceleration threshold: 4
[    22.862] (II) event1  - System mouse: is tagged by udev as: Mouse
[    22.873] (II) event1  - System mouse: device is a pointer
[    22.873] (II) config/udev: Adding input device AT keyboard (/dev/input/event2)
[    22.873] (**) AT keyboard: Applying InputClass "Evdev keyboard"
[    22.873] (**) AT keyboard: Applying InputClass "libinput keyboard catchall"
[    22.873] (II) Using input driver 'libinput' for 'AT keyboard'
[    22.873] (**) AT keyboard: always reports core events
[    22.873] (**) Option "Device" "/dev/input/event2"
[    22.873] (II) event2  - AT keyboard: is tagged by udev as: Keyboard
[    22.873] (II) event2  - AT keyboard: device is a keyboard
[    22.873] (II) event2  - AT keyboard: device removed
[    22.873] (**) Option "config_info" "udev:/dev/input/event2"
[    22.873] (II) XINPUT: Adding extended input device "AT keyboard" (type: KEYBOARD, id 8)
[    22.873] (**) Option "xkb_rules" "evdev"
[    22.873] (II) event2  - AT keyboard: is tagged by udev as: Keyboard
[    22.873] (II) event2  - AT keyboard: device is a keyboard
[    22.883] (II) config/udev: Adding input device IntelliMouse (/dev/input/event3)
[    22.883] (**) IntelliMouse: Applying InputClass "libinput pointer catchall"
[    22.883] (II) Using input driver 'libinput' for 'IntelliMouse'
[    22.883] (**) IntelliMouse: always reports core events
[    22.883] (**) Option "Device" "/dev/input/event3"
[    22.883] (II) event3  - IntelliMouse: is tagged by udev as: Mouse
[    22.892] (II) event3  - IntelliMouse: device is a pointer
[    22.892] (II) event3  - IntelliMouse: device removed
[    22.913] (II) libinput: IntelliMouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.913] (II) libinput: IntelliMouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.913] (II) libinput: IntelliMouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.913] (**) Option "config_info" "udev:/dev/input/event3"
[    22.913] (II) XINPUT: Adding extended input device "IntelliMouse" (type: MOUSE, id 9)
[    22.913] (**) Option "AccelerationScheme" "none"
[    22.913] (**) IntelliMouse: (accel) selected scheme none/0
[    22.913] (**) IntelliMouse: (accel) acceleration factor: 2.000
[    22.913] (**) IntelliMouse: (accel) acceleration threshold: 4
[    22.923] (II) event3  - IntelliMouse: is tagged by udev as: Mouse
[    22.923] (II) event3  - IntelliMouse: device is a pointer
[    22.923] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse Tablet (/dev/input/event4)
[    22.923] (**) VMware VMware Virtual USB Mouse Tablet: Applying InputClass "libinput pointer catchall"
[    22.923] (II) Using input driver 'libinput' for 'VMware VMware Virtual USB Mouse Tablet'
[    22.923] (**) VMware VMware Virtual USB Mouse Tablet: always reports core events
[    22.923] (**) Option "Device" "/dev/input/event4"
[    22.932] (II) event4  - VMware VMware Virtual USB Mouse Tablet: is tagged by udev as: Mouse
[    22.932] (II) event4  - VMware VMware Virtual USB Mouse Tablet: device is a pointer
[    22.932] (II) event4  - VMware VMware Virtual USB Mouse Tablet: device removed
[    22.932] (**) Option "config_info" "udev:/dev/input/event4"
[    22.932] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse Tablet" (type: MOUSE, id 10)
[    22.932] (**) Option "AccelerationScheme" "none"
[    22.932] (**) VMware VMware Virtual USB Mouse Tablet: (accel) selected scheme none/0
[    22.932] (**) VMware VMware Virtual USB Mouse Tablet: (accel) acceleration factor: 2.000
[    22.932] (**) VMware VMware Virtual USB Mouse Tablet: (accel) acceleration threshold: 4
[    22.932] (II) event4  - VMware VMware Virtual USB Mouse Tablet: is tagged by udev as: Mouse
[    22.932] (II) event4  - VMware VMware Virtual USB Mouse Tablet: device is a pointer
[    22.943] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event5)
[    22.943] (**) VMware VMware Virtual USB Mouse: Applying InputClass "libinput pointer catchall"
[    22.943] (II) Using input driver 'libinput' for 'VMware VMware Virtual USB Mouse'
[    22.943] (**) VMware VMware Virtual USB Mouse: always reports core events
[    22.943] (**) Option "Device" "/dev/input/event5"
[    22.943] (II) event5  - VMware VMware Virtual USB Mouse: is tagged by udev as: Mouse
[    22.943] (II) event5  - VMware VMware Virtual USB Mouse: device is a pointer
[    22.943] (II) event5  - VMware VMware Virtual USB Mouse: device removed
[    22.943] (II) libinput: VMware VMware Virtual USB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.943] (II) libinput: VMware VMware Virtual USB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.943] (II) libinput: VMware VMware Virtual USB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    22.943] (**) Option "config_info" "udev:/dev/input/event5"
[    22.943] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 11)
[    22.943] (**) Option "AccelerationScheme" "none"
[    22.943] (**) VMware VMware Virtual USB Mouse: (accel) selected scheme none/0
[    22.943] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000
[    22.943] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4
[    22.943] (II) event5  - VMware VMware Virtual USB Mouse: is tagged by udev as: Mouse
[    22.943] (II) event5  - VMware VMware Virtual USB Mouse: device is a pointer

freethread · 2025-12-08T22:04:09+0000

For me backgroud and multiple background works fine, I also have the llvmpipe warnings (FreeBSD as guest in VirtualBox)

Code:

(xfwm4:1225): xfwm4-WARNING **: 17:30:17.252: Unsupported GL renderer (llvmpipe (LLVM 19.1.7, 256 bits)).

however I can set background image (change image every 12h, random). Images have the same screen resolution (1920x1080), I do not think this is a duty