any thoughts on this? I had previously startx /usr/local/bin/openbox as root and executed glmark2 without issue. I then logged in as my regular user and created a .xinitrc file contining startup for openbox and tint2, then when I executed startx the desktop started and while opening and resizing a work xterm the display memory went nuts with repeating artifacts, so I logged in remotely and gathered some error dump info.
using stable 13.2 XFX Radeon RX580 (not overclocked) on E5440 Xeon SMP machine with 32Gbytes or RAM
I was led to believe that my configuration would be pretty stable, albeit slow with radeon GPU.
FWIW, I have no xorg.conf file created, but am using the defaults based on my installing of the necessary drivers. Xorg.0.log is pretty uneventful and does indicate my use of amdgpu on the RX580 Promethius10 firmware.
using stable 13.2 XFX Radeon RX580 (not overclocked) on E5440 Xeon SMP machine with 32Gbytes or RAM
I was led to believe that my configuration would be pretty stable, albeit slow with radeon GPU.
Code:
dmesg portion:
[drm ERROR :amdgpu_job_timedout] ring gfx timeout, signaled seq=633, emitted seq=635
[drm ERROR :amdgpu_job_timedout] Process information: process pid 100462 thread pid 100462
drmn0: GPU reset begin!
amdgpu: cp is busy, skip halt cp
amdgpu: rlc is busy, skip halt rlc
drmn0: BACO reset
drmn0: GPU reset succeeded, trying to resume
[drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
[drm] VRAM is lost due to GPU reset!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :amdgpu_cs_ioctl] Failed to initialize parser -85!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
[drm ERROR :uvd_v6_0_start] UVD not responding, giving up!!!
[drm ERROR :amdgpu_device_ip_set_powergating_state] set_powergating_state of IP block <uvd_v6_0> failed -1
drmn0: [drm] *ERROR* [drm ERROR :amdgpu_device_ip_resume_phase2] resume of IP block <uvd_v6_0> failed -60
drmn0: GPU reset(2) failed
drmn0: GPU reset end with ret = -60
[drm ERROR :amdgpu_job_timedout] ring gfx timeout, but soft recovered
[drm ERROR :amdgpu_job_timedout] ring gfx timeout, but soft recovered
Code:
messages portion:
May 26 23:32:43 greybox kernel: [drm ERROR :amdgpu_job_timedout] ring gfx timeout, signaled seq=633, emitted seq=635
May 26 23:32:43 greybox kernel: [drm ERROR :amdgpu_job_timedout] Process information: process pid 100462 thread pid 100462
May 26 23:32:43 greybox kernel: drmn0: GPU reset begin!
May 26 23:32:44 greybox kernel: amdgpu: cp is busy, skip halt cp
May 26 23:32:44 greybox kernel: amdgpu: rlc is busy, skip halt rlc
May 26 23:32:44 greybox kernel: drmn0: BACO reset
May 26 23:32:44 greybox kernel: drmn0: GPU reset succeeded, trying to resume
May 26 23:32:44 greybox kernel: [drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
May 26 23:32:44 greybox kernel: [drm] VRAM is lost due to GPU reset!
May 26 23:32:45 greybox kernel: [drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
May 26 23:32:51 greybox syslogd: last message repeated 5 times
May 26 23:32:51 greybox devd[734]: notify_clients: send() failed; dropping unresponsive client
May 26 23:32:51 greybox kernel: [drm ERROR :amdgpu_cs_ioctl] Failed to initialize parser -85!
May 26 23:32:51 greybox kernel: [drm ERROR :uvd_v6_0_start] UVD not responding, trying to reset the VCPU!!!
May 26 23:32:54 greybox syslogd: last message repeated 3 times
May 26 23:32:54 greybox kernel: [drm ERROR :uvd_v6_0_start] UVD not responding, giving up!!!
May 26 23:32:54 greybox kernel: [drm ERROR :amdgpu_device_ip_set_powergating_state] set_powergating_state of IP block <uvd_v6_0> failed -1
May 26 23:32:55 greybox kernel: drmn0: [drm] *ERROR* [drm ERROR :amdgpu_device_ip_resume_phase2] resume of IP block <uvd_v6_0> failed -60
May 26 23:32:55 greybox kernel: drmn0: GPU reset(2) failed
May 26 23:32:55 greybox kernel: drmn0: GPU reset end with ret = -60
May 26 23:33:05 greybox kernel: [drm ERROR :amdgpu_job_timedout] ring gfx timeout, but soft recovered
May 26 23:33:15 greybox syslogd: last message repeated 1 times
FWIW, I have no xorg.conf file created, but am using the defaults based on my installing of the necessary drivers. Xorg.0.log is pretty uneventful and does indicate my use of amdgpu on the RX580 Promethius10 firmware.