On FreeBSD 8.2-RELEASE-p3
I have an ASUS E35M-m1 PRO motherboard witch uses the AMD Brazos platform with Hudson M1.
Recently I bought 5 WD30EZRX disks (3TB, Sata 6Gb/s).
My other disks are Seagate ST31000340AS and ST31000330AS (1TB Sata 3Gb/s)
System disk is a Seagate ST380815AS 4.AAB.
I also use Intel SASUC8i and Highoint RocketRaid 620 PCIe SATA/SAS cards
I use ZFS on every disk.
The new 3TB disks give me lots of problems:
on ata ports:
warning - write_dma
timeout - read dma
sudden reboots
I RMA'd one disk back (ad12) because there were soms S.M.A.R.T. errors. Wich was confirmed and I am now waiting to get that disk back.
Meanwhile an other disks starts to give problems after copying +24h.
Also I see (for the Highpoint RocketRaid 620):
Original setup with no problems:
- 3 1TB disks and system disk on onboard controller
- 4 1TB on 2x Highpoint RocketRaid 620
Current setup with problems:
- 5 3TB disks on onboard controller
- system disk on Highpoint RocketRaid 620
- 7 1TB on Intel SASUC8i (~LSI SAS3081E-R)
dmesg also shows some ACPI warnings, errors and exceptions
I have an ASUS E35M-m1 PRO motherboard witch uses the AMD Brazos platform with Hudson M1.
Recently I bought 5 WD30EZRX disks (3TB, Sata 6Gb/s).
My other disks are Seagate ST31000340AS and ST31000330AS (1TB Sata 3Gb/s)
System disk is a Seagate ST380815AS 4.AAB.
I also use Intel SASUC8i and Highoint RocketRaid 620 PCIe SATA/SAS cards
I use ZFS on every disk.
The new 3TB disks give me lots of problems:
on ata ports:
warning - write_dma
timeout - read dma
sudden reboots
I RMA'd one disk back (ad12) because there were soms S.M.A.R.T. errors. Wich was confirmed and I am now waiting to get that disk back.
Meanwhile an other disks starts to give problems after copying +24h.
Code:
ad8: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=40<UNCORRECTABLE> LBA=422471168
Also I see (for the Highpoint RocketRaid 620):
Code:
atapci1: <Marvell AHCI controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xfe910000-0xfe9107ff irq 16 at device 0.0 on pci3
atapci1: [ITHREAD]
atapci1: AHCI v1.00 controller with 2 6Gbps ports, PM supported
ata8: <ATA channel 0> on atapci1
ata8: port is not ready (timeout 0ms) tfd = 00000180
ata8: software reset clear timeout
ata8: port is not ready (timeout 0ms) tfd = 00000180
ata8: software reset clear timeout
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci1
ata9: [ITHREAD]
Original setup with no problems:
- 3 1TB disks and system disk on onboard controller
- 4 1TB on 2x Highpoint RocketRaid 620
Current setup with problems:
- 5 3TB disks on onboard controller
- system disk on Highpoint RocketRaid 620
- 7 1TB on Intel SASUC8i (~LSI SAS3081E-R)
dmesg also shows some ACPI warnings, errors and exceptions
Code:
real memory = 8589934592 (8192 MB)
avail memory = 8199028736 (7819 MB)
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
ioapic0: Changing APIC ID to 0
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: [ITHREAD]
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20101013/psargs-464)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20101013/nsinit-452)
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900