dvl@
Developer
After a reboot (to upgrade the kernel), one of the spare HDD is inoperable...
Before I proceed with a fix, I wanted a second opinion. This is what I think I need to do:
Make sense?
The current state of the system is:
Before I proceed with a fix, I wanted a second opinion. This is what I think I need to do:
Code:
# tw_cli maint deleteunit c0 u2
# tw_cli maint createunit c0 p0 rspare
The current state of the system is:
Code:
FreeBSD supernews.example.org 8.2-STABLE FreeBSD 8.2-STABLE #0: Fri Nov 11 20:08:41 UTC 2011
[email]dvl@supernews.example.org[/email]:/usr/obj/usr/src/sys/OPTI amd64
Code:
# tw_cli info
Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU
------------------------------------------------------------------------
c0 9550SX-8LP 8 8 3 1 4 1 OK
# tw_cli info c0
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-10 OK - - 64K 195.548 ON ON
u1 SPARE OK - - - 69.2404 - ON
u2 RAID-10 INOPERABLE - - 64K 195.548 OFF ON
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u2 69.25 GB 145226112 WD-WMAKE2379003
p1 OK u1 69.25 GB 145226112 WD-WMAKE2379069
p2 OK u0 69.25 GB 145226112 WD-WMAKE2379066
p3 OK u0 69.25 GB 145226112 WD-WMAKE2379012
p4 OK u0 69.25 GB 145226112 WD-WMAKE2379286
p5 OK u0 69.25 GB 145226112 WD-WMAKE2379019
p6 OK u0 69.25 GB 145226112 WD-WMAKE2394339
p7 OK u0 69.25 GB 145226112 WD-WMAKE2378696
Name OnlineState BBUReady Status Volt Temp Hours LastCapTest
---------------------------------------------------------------------------
bbu On Yes OK OK OK 255 02-Sep-2010