2 lancard+1 adsl modem

[lamany1977]

Hi all. I want to ask about my configuration. Here is below.

I've installed FreeBSD 7.2 and then I've 2 lan cards and 1 adsl modem and I want to configure it as FreeBSD router.

modem ip=192.168.1.1
lancard 1->rl0=192.168.1.2 -> cable connect to modem
lancard 2->rl1=192.168.0.144 -> cable connect to hub switch

1. Here is my /etc/rc.conf

ifconfig_rl0="inet 192.168.1.2 netmask 255.255.255.0"
ifconfig_rl1="inet 192.168.0.144 netmask 255.255.255.0"
defaultrouter="192.168.1.1" ## to modem ip
hostname="localinternetserver.com"

2. Here is my /etc/resolv.conf

   domain internetserver.com
   nameserver 192.168.1.1 ## to modem ip

3. Client windows xp

   ip  : 192.168.0.100
   gw  : 192.168.0.144
   dns : 192.168.0.144 ## to ip:rl1

Everything is fine when I ping http://www.google.com from the server. But if I ping from client it can not reply.

Thanks very much.

irwan-denpasar-bali

 

[wblock@]

See
% man rc.conf | less +3/gateway_enable

 

[lamany1977]

See
% man rc.conf | less +3/gateway_enable

I've read, looks like too many parameters. Can you give the real sample. Thanks.

 

[wblock@]

http://www.freebsd.org/doc/en_US.IS...network-routing.html#NETWORK-DEDICATED-ROUTER

Also look up firewalls, DHCP, and NAT.

 

[SirDice]

Yep, you will need to use gateway_enable to turn on routing.

But besides that you will also need to configure NAT.

 

[lamany1977]

Thanks for the solution. Can you give me some tutorial or article, so I can learn the details?

Thanks a lot.