Hi, I installed FreeBSD 11 and updated to p2, AMD64, on my laptop Dell Alienware 13 - an Intel Haswell architecture, with NVidia Optimus.
I'm IT French, I'm using some French tutorials, as :
- Installation et Configuration de FreeBSD comme poste de travail
I can use HDDs USB Fat32, NTFS, and Ext3 with automount tools
Thanks to Thread 50831, and the handbook.
Just a little question: fsck(8) tool seems not understand and repair ext2fs, really?
Because:
=> I hope to use my NVidia, with the Bumblebee Project?!
=> I need to use my printer Epson BX525WD, used by network. I think, it's necessary to using Linux compatibility to install it, because it need her ppd file. And egual, her scanner tool named "Iscan for Linux".
=> now, I search how install/configure driver for my wireless network, Qualcomm Atheros QCA6174! ;-)
Hardware embedded:
I'm IT French, I'm using some French tutorials, as :
- Installation et Configuration de FreeBSD comme poste de travail
I can use HDDs USB Fat32, NTFS, and Ext3 with automount tools
Thanks to Thread 50831, and the handbook.
Just a little question: fsck(8) tool seems not understand and repair ext2fs, really?
Because:
Code:
# fsck
fsck fsck_4.2bsd fsck_ffs fsck_msdosfs fsck_ufs=> I hope to use my NVidia, with the Bumblebee Project?!
=> I need to use my printer Epson BX525WD, used by network. I think, it's necessary to using Linux compatibility to install it, because it need her ppd file. And egual, her scanner tool named "Iscan for Linux".
=> now, I search how install/configure driver for my wireless network, Qualcomm Atheros QCA6174! ;-)
Hardware embedded:
Code:
# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x06831028 chip=0x0a048086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x06831028 chip=0x0a168086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT Integrated Graphics Controller'
class = display
subclass = VGA
hdac0@pci0:0:3:0: class=0x040300 card=0x06831028 chip=0x0a0c8086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT HD Audio Controller'
class = multimedia
subclass = HDA
none0@pci0:0:4:0: class=0x118000 card=0x06831028 chip=0x0a038086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
class = dasp
xhci0@pci0:0:20:0: class=0x0c0330 card=0x06831028 chip=0x9c318086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series USB xHCI HC'
class = serial bus
subclass = USB
none1@pci0:0:22:0: class=0x078000 card=0x06831028 chip=0x9c3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series HECI'
class = simple comms
hdac1@pci0:0:27:0: class=0x040300 card=0x06831028 chip=0x9c208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series HD Audio Controller'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x06831028 chip=0x9c148086 rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:3: class=0x060400 card=0x06831028 chip=0x9c168086 rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:4: class=0x060400 card=0x06831028 chip=0x9c188086 rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 5'
class = bridge
subclass = PCI-PCI
ehci0@pci0:0:29:0: class=0x0c0320 card=0x06831028 chip=0x9c268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series USB EHCI'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x06831028 chip=0x9c438086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x06831028 chip=0x9c038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series SATA Controller 1 [AHCI mode]'
class = mass storage
subclass = SATA
none2@pci0:0:31:3: class=0x0c0500 card=0x06831028 chip=0x9c228086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series SMBus Controller'
class = serial bus
subclass = SMBus
none3@pci0:1:0:0: class=0x028000 card=0x15251a56 chip=0x003e168c rev=0x20 hdr=0x00
vendor = 'Qualcomm Atheros'
device = 'QCA6174 802.11ac Wireless Network Adapter'
class = network
alc0@pci0:2:0:0: class=0x020000 card=0x05ac1028 chip=0xe0911969 rev=0x10 hdr=0x00
vendor = 'Qualcomm Atheros'
device = 'Killer E220x Gigabit Ethernet Controller'
class = network
subclass = ethernet
vgapci1@pci0:3:0:0: class=0x030200 card=0x06831028 chip=0x139210de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GM107M [GeForce GTX 860M]'
class = display
subclass = 3D
Code:
# lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
01:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)
02:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 10)
03:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
Code:
# usbconfig
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen0.2: <Wireless USB Device HOLTEK> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)
ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen0.3: <IntegratedWebcamFHD CN036P597248751HABEMA00> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
ugen0.4: <AW13 Alienware> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA)
ugen0.5: <product 0x3004 vendor 0x0cf3> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
Last edited by a moderator: