Solved 11.2 on Celeron N3150 fails to boot

W

whitesnow

Hi all,

I just got this Zotac zbox 323 nano, wanted to install FreeBSD or a NAS version on it.

An USB-Stick with FreeBSD 11.1 boots successfully.

A NAS4Free Stick with version 10.x did boot.
Doing an update on that, failed to boot.
They just renamed their project, so the image I used is called XigmaNAS-x64-embedded-11.2.0.4.5748.

Using the option "failsafe", got some output, it started to boot, the last messages had been:

Code: 
...
atrtc0: <AT realtime clock> at port 0x70 irq8 on isa0
atrtc0: registered as a time-of-day-clock, resolution 1.000000s
atrtc0: Can't map interrupt
atrtc0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt
fdc0: cannot reserve interrupt line
ppc0: cannot reserve I/O port range
...

panic: no usable event timer found!

The other attempts, using a stick to update from FreeBSD 11.1 to 11.2, or a newly downloaded FreeBSD-11.2-RELEASE-amd64-mini-memstick.img image did not get further than:
Code: 
/boot/kernel/kernel ...

Booting...
/
_
Here from running FreeBSD 11.1 the dmesg, lspci, lsusb, if that is of any help:
Code: 
user@machine:~ % dmesg
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p11 #0: Thu Jun 21 03:46:08 UTC 2018
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz (1600.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c3  Family=0x6  Model=0x4c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8134418432 (7757 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfadt-748)
ioapic0 <Version 2.0> irqs 0-114 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1600052620 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5ec40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
sdhci_pci0: <Intel Braswell eMMC 4.5.1 Controller> mem 0x81516000-0x81516fff irq 16 at device 16.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81515000-0x815157ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x81500000-0x8150ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel (0x2284) HDA Controller> mem 0x81510000-0x81513fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x81400000-0x81400fff,0xa0100000-0xa0103fff irq 17 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:70:c5:f2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff irq 18 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:70:c5:f3
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib4
pci3: <network> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <HGST HTS541010A9E680 JA0OA560> ATA8-ACS SATA 3.x device
ada0: Serial Number xxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
pcm1: <Realtek ALC892 (Left Digital)> at nid 30 on hdaa0
hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
pcm3: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm4: <Intel (0x2883) (HDMI/DP 8ch)> at nid 6 on hdaa1
Trying to mount root from zfs:zpool-test/ROOT/11.1p11 []...
uhub0: 13 ports with 13 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number xxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0
ugen0.5: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.6: <vendor 0x04f3 product 0x0103> at usbus0
ukbd0 on uhub2
ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 5> on usbus0
kbd2 at ukbd0
umass1 on uhub1
umass1: <SanDisk Extreme, class 0/0, rev 2.10/0.10, addr 6> on usbus0
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:3:1: Attached to scbus3
da1 at umass-sim1 bus 1 scbus3 target 0 lun 0
da1: <SanDisk Extreme 0001> Removable Direct Access SPC-4 SCSI device
da1: Serial Number xxx
da1: 40.000MB/s transfers
da1: 30533MB (62533296 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
re1: link state changed to DOWN
uhid0 on uhub2
uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 5> on usbus0
Accounting enabled
re0: link state changed to DOWN
re0: link state changed to UP

user@machine:~ % pciconf -l
hostb0@pci0:0:0:0:    class=0x060000 card=0xb30119da chip=0x22808086 rev=0x21 hdr=0x00
vgapci0@pci0:0:2:0:    class=0x030000 card=0xb30119da chip=0x22b18086 rev=0x21 hdr=0x00
sdhci_pci0@pci0:0:16:0:    class=0x080501 card=0xb30119da chip=0x22948086 rev=0x21 hdr=0x00
ahci0@pci0:0:19:0:    class=0x010601 card=0xb30119da chip=0x22a38086 rev=0x21 hdr=0x00
xhci0@pci0:0:20:0:    class=0x0c0330 card=0xb30119da chip=0x22b58086 rev=0x21 hdr=0x00
none0@pci0:0:26:0:    class=0x108000 card=0xb30119da chip=0x22988086 rev=0x21 hdr=0x00
hdac0@pci0:0:27:0:    class=0x040300 card=0xb30119da chip=0x22848086 rev=0x21 hdr=0x00
pcib1@pci0:0:28:0:    class=0x060400 card=0xb30119da chip=0x22c88086 rev=0x21 hdr=0x01
pcib2@pci0:0:28:1:    class=0x060400 card=0xb30119da chip=0x22ca8086 rev=0x21 hdr=0x01
pcib3@pci0:0:28:2:    class=0x060400 card=0xb30119da chip=0x22cc8086 rev=0x21 hdr=0x01
pcib4@pci0:0:28:3:    class=0x060400 card=0xb30119da chip=0x22ce8086 rev=0x21 hdr=0x01
isab0@pci0:0:31:0:    class=0x060100 card=0xb30119da chip=0x229c8086 rev=0x21 hdr=0x00
none1@pci0:0:31:3:    class=0x0c0500 card=0xb30119da chip=0x22928086 rev=0x21 hdr=0x00
re0@pci0:2:0:0:    class=0x020000 card=0x012310ec chip=0x816810ec rev=0x0c hdr=0x00
re1@pci0:3:0:0:    class=0x020000 card=0x012310ec chip=0x816810ec rev=0x0c hdr=0x00
none2@pci0:4:0:0:    class=0x028000 card=0x80708086 chip=0x08b38086 rev=0x83 hdr=0x00

root@machine:/home/user # usbconfig
ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA)
ugen0.3: <Generic USB2.0-CRW> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
ugen0.5: <vendor 0x1a40 USB 2.0 Hub> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA)
ugen0.6: <vendor 0x04f3 product 0x0103> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)
ugen0.7: <SanDisk Extreme> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (200mA)

Thanks in advance
 
whitesnow said:
A NAS4Free Stick with version 10.x did boot.
Doing an update on that, failed to boot.
They just renamed their project, so the image I used is called XigmaNAS-x64-embedded-11.2.0.4.5748.
Click to expand...
This is not supported here: PC-BSD, FreeNAS, NAS4Free, and all other FreeBSD Derivatives

We can help with a plain, supported, FreeBSD install. But I'm at a total loss what you currently have or what you're trying to install.

These messages don't look good:
Code: 
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1


ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfadt-748)
Have you tried updating the BIOS/UEFI of the machine?
 
I did update the BIOS.

Well, on plain FreeBSD 11.2, the screen only shows "Booting..." with this usually turning dash, that does not even turn.
 
Great, thank you very much, SirDice.

This really booted the minimemstick image.

I did not install FreeBSD using UEFI up to now.
Always had to use legacy, even gpart with lenovofix.

So now I have to look how that UEFI is going to work to get installed.
 
SirDice said:
These messages don't look good:
Code: 
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1


ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfadt-748)
Click to expand...

Interestingly, I see those same two messages on a Celeron J1900 board (ASRock Q1900[DC]-ITX, as I recall) running 11.1-RELEASE (that has similar challenges with booting an 11.2-RELEASE kernel in "BIOS" mode)
Code: 
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfadt-748)
WARNING: Bogus Interrupt Polarity. Assume CONFORMS

I'll check for an updated BIOS for the system later on.
 
Well, the installed version boots with UEFI.

But, I cannot do a reboot.

While doing a reboot, it hangs at the boot screen, where it shows
"Press <DEL> to enter setup.
Press <F8> to enter Popup BBS menu."

Only after I pull the power cable, does it go further than that place.
And boots up again.

I can put a dmesg of that now:
Code: 
user@machine:~ % dmesg
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 1280x1024
CPU: Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz (1600.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c3  Family=0x6  Model=0x4c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8131371008 (7754 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
ioapic0 <Version 2.0> irqs 0-114 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1600054820 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
sdhci_pci0: <Intel Braswell eMMC 4.5.1 Controller> mem 0x81516000-0x81516fff irq 16 at device 16.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81515000-0x815157ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x81500000-0x8150ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel (0x2284) HDA Controller> mem 0x81510000-0x81513fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x81400000-0x81400fff,0xa0100000-0xa0103fff irq 17 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:70:c5:f2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff irq 18 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:70:c5:f3
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib4
pci3: <network> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
mmc0: No compatible cards found on bus
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Left Digital)> at nid 30 on hdaa0
hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
pcm3: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm4: <Intel (0x2883) (HDMI/DP 8ch)> at nid 6 on hdaa1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <HGST HTS541010A9E680 JA0OA560> ATA8-ACS SATA 3.x device
ada0: Serial Number xxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 13 ports with 13 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number xxxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0
Root mount waiting for: usbus0
ugen0.5: <vendor 0x04f3 product 0x0103> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 4> on usbus0
kbd2 at ukbd0
random: unblocking device.
re0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to DOWN
ubt0 on uhub1
ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 3> on usbus0
uhid0 on uhub1
uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 4> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ubt0: ubt_ctrl_write_callback:780: control transfer failed: USB_ERR_TIMEOUT
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
user@machine:~ %
 
To bring an update on that.

That machine does reboot. Only it takes some time, once I looked, about 2 minutes showing the bios screen.
Further, it does boot in 11.2 and in 12.0 with bios/legacy.

But it does not give screen output after showing "Booting...
\"

It shows problems with other systems, too.
Some old Linux, I still have on a stick, Knoppix 7.2.0 from 2013 does give no output after startx.
So, after booting FreeBSD 11.2 and logging in via ssh, I suspect the problem to be shown in this line:
Code: 
VT: init without driver.

Here the full dmesg:
Code: 
user@machine:~ % dmesg
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT: init without driver.
CPU: Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz (1600.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c3  Family=0x6  Model=0x4c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8131366912 (7754 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
ioapic0 <Version 2.0> irqs 0-114 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1600052060 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
sdhci_pci0: <Intel Braswell eMMC 4.5.1 Controller> mem 0x81516000-0x81516fff irq 16 at device 16.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81515000-0x815157ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x81500000-0x8150ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel (0x2284) HDA Controller> mem 0x81510000-0x81513fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x81400000-0x81400fff,0xa0100000-0xa0103fff irq 17 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:70:c5:f2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff irq 18 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8251 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:70:c5:f3
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib4
pci3: <network> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Left Analog)> at nid 20 and 24 on hdaa0
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <HGST HTS541010A9E680 JA0OA560> ATA8-ACS SATA 3.x device
pcm1: ada0: Serial Number xxx
<Realtek ALC892 (Left Digital)> at nid 30 on hdaa0
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
pcm3: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm4: <Intel (0x2883) (HDMI/DP 8ch)> at nid 6 on hdaa1
Trying to mount root from zfs:zroot/ROOT/11.2 []...
Root mount waiting for: usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- SD/MMC/MS PRO 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number xxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus0
usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
ugen0.4: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.4: <vendor 0x04f3 product 0x0103> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 4> on usbus0
Root mount waiting for: usbus0
kbd2 at ukbd0
random: unblocking device.
re0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to DOWN
uhid0 on uhub1
uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 4> on usbus0
CPU: Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz (1600.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c3  Family=0x6  Model=0x4c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
user@machine:~ %

Best
 
You must log in or register to reply here.
Back
Top