fixed wireless modem

Internet can be served on 4G and 5G devices, which are under the category of Fixed Wireless Internet. Dongles and standalone gateway modems need a SIM card to function. It's important that the Access Point Name (APN) is set so that it will connect to Internet access based on that service. You...

Colleagues, could you please tell me what I'm doing wrong? I have a Huawei E1550 USB GSM modem. When turned on, it creates three COM ports. I want the names of the special files to be unique and not change their order when connecting other USB-serial adapters. Here it is...

Hello, I need 4G cellular internet USB modem, that is NOT android and not vendor-locked. If modem is not android, its probably using AT commands which are universally work on FreeBSD and Windows. Why not android modem? First, I need precise control of parameters, which, of course, android...

Good day! I'm trying to run the Fibocom L860-GL LTE modem on FreeBSD 14.1. This modem can work in CDC NCM mode. There is a script on the Internet that one good person wrote for this modem using PowerShell under Win and shared it. The essence of the script is quite simple: first, the modem is...

hello everyone I don't know if the right place, for a future version of FreeBSD13 would it be possible to provide these additions please: /sys/dev/usb/serial/u3g.c @@ - @@ static const STRUCT_USB_HOST_ID u3g_devs[] = { U3G_DEV(DLINK, DWM157_2, 0), + U3G_DEV(DLINK, DWM221_CD...

Hello everyone, I have an LTE Sierra MC7403 modem installed on an PC-Engines APU3 (OPNSense), everything works perfectly except the speed which systematically returns to 5Mbps/5Mbps after reboot. the only solution to arrive at a transfer rate of 45Mbps/40Mbps and to reset the modem with the...

ifconfig host em0: flags=8963<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=4812099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,NOMAP> ether 00:21:cc:72:71:ba inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255...

Is there a known tested hardware/software combo, such as a USB dongle modem for example, that could allow for receiving SMS messages on a FreeBSD machine? I don't care much for the format, it could be a text file dump, but something semi-automatic, without the need to write scripts with AT...

I got a Lenovo Thinkpad X1 Carbon Gen9 here. It comes with a Quectel EM120-R LTE modem (datasheet). As far as I can tell, there currently isn't a way to use this particular modem with FreeBSD. My idea would have been to setup a small VM running something like OpenWRT and passing the card...

I got a TP-LINK Archer MR200 a couple of months ago but am having terrible problems with it disconnecting or not even connecting, so want to get a replacement (not too expensive). What would anyone recommend?

Good day. There was a need to connect a modem Huawei R216 к FreeBSD 12.2(PfSense). Package usb_modeswitch installed. Can't get it out of mode "usbdisk + CD-ROM" in mode "modem". /usr/local/etc/usb_modeswitch.conf : DisableSwitching=0 EnableLogging=1 DefaultVendor= 0x12d1 DefaultProduct=...

How can I tell if my ThinkPad T420 has a cellular modem installed? There is a SIM slot behind the battery, but I don't know if it is connected to anything.

What would anyone recommend for a 4G Modem/Router? I'd prefer something to which I could attach an external 4G antenna. Recommendations for such an antenna would also be welcomed.

Dear disciples of the free BeaSD, I'm very unhappy with the widely varying network latency of my internet connection via the old 3G technology. ATM I'm using a HSDPA+ modem in my laptop (3.5G). Usually, I have fully sufficient bandwidth e.g. on big downloads, but interactive use cases are...

My regards, everyone... I use a modem no DHCP configuration occurs during installation right now with Linux there is no second device ))) can I configure the modem? thank you... (FreeBSD-12.1-RELEASE-amd64-disc1.iso) Bus 001 Device 002: ID 19d2:1405 ZTE WCDMA Technologies MSM

Hi! I'm dialing in over WWAN on a laptop w/ ppp on the /dev/cuaU0 serial port of the 3G WWAN card (HSDPA+, no LTE). The drivers involved handle all the magic to route the command and data port automagically (e.g. the line speed on /dev/cuaU0 defaults to 115200 baud, but I have up to 12Mbit...

I've got an issue to connect to mobile LTE using mpd5 due to the following error. Standard PPP conenction works but is slow (up to 30 Mb/s). root@server:~ # usbconfig ugen0.3 ugen0.3: <SimTech, Incorporated SimTech, Incorporated> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)...

Hi, which is a known good brand or model to work flawlessly unter FreeBSD? Or, more generally: is there a list or wiki containing recommended hardware? Also a blacklist? Thanks.

Hello, I bought a Huawei E3372 modem and flashed its firmware to "stick mode", so it acts as a modem, not as a router. This way, I have access to NCM connection instead of PPP. I also modified the multi-mode so I do not need to use usb_modeswitch. Manually, I : launch an AT^ command to...

Can you guys add support for it? That'd be great... it uses the Intel XMM 7360 LTE modem. I really want to use it in my pfSense build. I couldn't find it in the supported hardware list.