I have problem with WiF GUI.
It would be very good that you explain the procedure, it are seen that are well properly configured and the onion is green.Tor, Vidalia, FoxyProxy ads-on
Code:ctrl_interface=/var/run/wpa_supplicant eapol_version=2 ap_scan=1 fast_reauth=1 network={ ssid="escapenet1" psk="xxx" priority=5 } network={ priority=0 key_mgmt=NONE }
ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
eapol_version=2
ap_scan=1
fast_reauth=1
network={
ssid="escapenet1"
+ scan_ssid=1
+ proto=WPA RSN
+ key_mgmt=WPA-PSK
+ pairwise=CCMP
psk="xxx"
priority=5
}
I was add and GUI is still crasching
pw groupshow wheel
ifconfig wlan0
First, check out that you can connect to internet without wifimgr port
# pw groupshow wheel
wheel:*:0:root
root@komputer:/usr/home/komputer # ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 24:77:03:22:26:0c
inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
status: associated
ssid escapenet1 channel 1 (2412 MHz 11g) bssid 98:f5:37:30:97:58
country US authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit
txpower 13 bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
roam:rssi 7 roam:rate 5 protmode CTS wme roaming MANUAL
pw groupmod wheel -m your_user
it's likely there's some bug.cannot reset interface wlan0 - exit code 1