Audio not working system76 pangolin 12 laptop

According to the "git status" output, the patch has been applied.

If you have done the following already
I did try env -i make -j `sysctl -n hw.ncpu` kernel INSTKERNNAME=CONEXANT

skip to run the kernel:
Reboot system, at the FreeBSD boot menu choose "CONEXANT" kernel by pressing the "6" key. You will notice at the "Kernel: 6. ..." menu the color highlighted kernel name change.
and
After system boot check
  • the correct kernel being booted: kenv | grep kernel_path. It should show /boot/CONEXANT.
  • default device: cat /dev/sndstat
  • volume ("vol", "pcm"): mixer
  • assuming pcm1: <Conexant ... (Analog)> (play/rec) default : beep /dev/dsp1 over speaker and headphones
 
According to the "git status" output, the patch has been applied.

If you have done the following already


skip to run the kernel:

and

kenv | grep kernel_path

Code:
kernel_path="/boot/CONEXANT"

cat /dev/sndstat

Code:
Installed devices:
pcm0: <ATI R6xx (HDMI)> (play)
pcm1: <Conexant CX11970 (Analog 2.0+HP/2.0)> (play/rec) default
No devices installed from userspace.

mixer
Code:
pcm1:mixer: <Conexant CX11970 (Analog 2.0+HP/2.0)> on hdaa1 (play/rec) (default)
    vol       = 0.86:0.86     pbk
    pcm       = 1.00:1.00     pbk
    speaker   = 1.00:1.00     pbk
    mic       = 0.56:0.56     rec src
    rec       = 0.01:0.01     pbk
    ogain     = 1.00:1.00     pbk


beep /dev/dsp1

produces no output unfortunately, also tested with headphones, tested with and without device hints
 
Back
Top