- Thread Starter
- #26
I still have no audio to my headset/microphone so here's a quick recap:
# cat /dev/sndstat
Installed devices:
pcm0: <Realtek ALC256 (Analog 2.0+HP/2.0)> (play/rec) default
pcm1: <Realtek ALC256 (Rear Analog Line-out)> (play)
pcm2: <Intel Alder Lake (HDMI/DP 8ch)> (play)
pcm3: <Yealink Yealink UH34> (play/rec)
No devices installed from userspace.
# mixer pcm=1.00
pcm.volume: 0.75:0.75 -> 1.00:1.00
pcm3:mixer: <Yealink Yealink UH34> on uaudio0 (play/rec) (default)
vol = 0.75:0.75 pbk
bass = 0.50:0.50 pbk
treble = 0.50:0.50 pbk
pcm = 1.00:1.00 pbk
rec = 0.75:0.75 pbk
monitor = 0.10:0.10 pbk
mixer vol=1.00
vol.volume: 0.75:0.75 -> 1.00:1.00
pcm3:mixer: <Yealink Yealink UH34> on uaudio0 (play/rec) (default)
vol = 1.00:1.00 pbk
bass = 0.50:0.50 pbk
treble = 0.50:0.50 pbk
pcm = 1.00:1.00 pbk
rec = 0.75:0.75 pbk
monitor = 0.10:0.10 pbk
cat /etc/sysctl.conf
#
# This file is read when going to multi-user and its contents piped thru
# ``sysctl'' to adjust kernel values. ``man 5 sysctl.conf'' for details.
#
# Uncomment this to prevent users from seeing information about processes that
# are being run under another UID.
#security.bsd.see_other_uids=0
security.bsd.see_other_uids=0
security.bsd.see_other_gids=0
security.bsd.see_jail_proc=0
security.bsd.unprivileged_read_msgbuf=0
security.bsd.unprivileged_proc_debug=0
kern.randompid=1
vfs.zfs.vdev.min_auto_ashift=12
# hw.snd.default_unit=3
hw.snd.default_auto=2
This command shows the headset is the default:
# sysctl hw.snd.default_unit
hw.snd.default_unit: 3
Per tyoc213, I tried both of the following commands, and they DO direct the sound to the headset:
beep -D 2000 -d /dev/dsp3
and
cat /dev/random > /dev/dsp3
I'm visiting YouTube videos and/or streaming, online radio stations, but I still have no audio. The pavucontrol GUI shows "Dummy Output" still. It's like the FBSD GUI simply doesn't recognize the headset/microphone. I have evn tried a completely different headset/microphone, and neither one produce sound. Finally, I've tried both LXQT and Fluxbox as my interface, and they yield the same result...no sound!

Suggestions?
Ed
# cat /dev/sndstat
Installed devices:
pcm0: <Realtek ALC256 (Analog 2.0+HP/2.0)> (play/rec) default
pcm1: <Realtek ALC256 (Rear Analog Line-out)> (play)
pcm2: <Intel Alder Lake (HDMI/DP 8ch)> (play)
pcm3: <Yealink Yealink UH34> (play/rec)
No devices installed from userspace.
# mixer pcm=1.00
pcm.volume: 0.75:0.75 -> 1.00:1.00
pcm3:mixer: <Yealink Yealink UH34> on uaudio0 (play/rec) (default)
vol = 0.75:0.75 pbk
bass = 0.50:0.50 pbk
treble = 0.50:0.50 pbk
pcm = 1.00:1.00 pbk
rec = 0.75:0.75 pbk
monitor = 0.10:0.10 pbk
mixer vol=1.00
vol.volume: 0.75:0.75 -> 1.00:1.00
pcm3:mixer: <Yealink Yealink UH34> on uaudio0 (play/rec) (default)
vol = 1.00:1.00 pbk
bass = 0.50:0.50 pbk
treble = 0.50:0.50 pbk
pcm = 1.00:1.00 pbk
rec = 0.75:0.75 pbk
monitor = 0.10:0.10 pbk
cat /etc/sysctl.conf
#
# This file is read when going to multi-user and its contents piped thru
# ``sysctl'' to adjust kernel values. ``man 5 sysctl.conf'' for details.
#
# Uncomment this to prevent users from seeing information about processes that
# are being run under another UID.
#security.bsd.see_other_uids=0
security.bsd.see_other_uids=0
security.bsd.see_other_gids=0
security.bsd.see_jail_proc=0
security.bsd.unprivileged_read_msgbuf=0
security.bsd.unprivileged_proc_debug=0
kern.randompid=1
vfs.zfs.vdev.min_auto_ashift=12
# hw.snd.default_unit=3
hw.snd.default_auto=2
This command shows the headset is the default:
# sysctl hw.snd.default_unit
hw.snd.default_unit: 3
Per tyoc213, I tried both of the following commands, and they DO direct the sound to the headset:
beep -D 2000 -d /dev/dsp3
and
cat /dev/random > /dev/dsp3
I'm visiting YouTube videos and/or streaming, online radio stations, but I still have no audio. The pavucontrol GUI shows "Dummy Output" still. It's like the FBSD GUI simply doesn't recognize the headset/microphone. I have evn tried a completely different headset/microphone, and neither one produce sound. Finally, I've tried both LXQT and Fluxbox as my interface, and they yield the same result...no sound!
Suggestions?
Ed