It mounts in Windows and Linux on this same box. This is what dmesg reports when it is attached:
Trying to mount it results in:
Code:
ugen7.2: <Generic External> at usbus7
umass1 on uhub6
umass1: <Generic External, class 0/0, rev 2.10/2.05, addr 2> on usbus7
umass1: SCSI over Bulk-Only; quirks = 0x4000
umass1:10:1: Attached to scbus10
(probe0:umass-sim1:1:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim1:1:0:0): Error 22, Unretryable error
da5 at umass-sim1 bus 1 scbus10 target 0 lun 0
da5: <Generic External 0205> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number 353750545433585454202020
da5: 40.000MB/s transfers
da5: 152627MB (312581807 512 byte sectors)
da5: quirks=0x2<NO_6_BYTE>
Trying to mount it results in:
Code:
root@fb12hp:/dev# gpart list da5
Geom name: da5
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 312581806
first: 63
entries: 4
scheme: MBR
Providers:
1. Name: da5s1
Mediasize: 9437184000 (8.8G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 1048576
Mode: r0w0e0
efimedia: HD(1,MBR,0x38654aae,0x800,0x1194000)
rawtype: 7
length: 9437184000
offset: 1048576
type: ntfs
index: 1
end: 18434047
start: 2048
2. Name: da5s2
Mediasize: 148494090240 (138G)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2956984320
Mode: r0w0e0
efimedia: HD(2,MBR,0x38654aae,0x1582000,0x11497800)
rawtype: 7
length: 148494090240
offset: 11546918912
type: ntfs
index: 2
end: 312580095
start: 22552576
Consumers:
1. Name: da5
Mediasize: 160041885184 (149G)
Sectorsize: 512
Mode: r0w0e0
root@fb12hp:/dev# mount -t ntfs-3g /dev/da5s2 usb
mount: /dev/da5s2: Operation not supported by device
root@fb12hp:/mnt# mount -t ntfs-3g /dev/da5s1 usb
mount: /dev/da5s1: Operation not supported by device