I have successfully follow this link to replace a supposedly bad drive.
http://forums.freebsd.org/showthread.php?t=14097
But my systems keeps telling me I have still hard errors on disk2.
/var/log/messages.
My os:
I'm sure that I'm replacing the right drive.
disk2 is the disk in question, so from the server I have pulled bay 3.
0, and 1 are for the OS. 2,3,4,5,6,7,8,9,10 are for tank pool.
Can some one point me to a site or help me out by giving me some ideas.
Thank you guys.
http://forums.freebsd.org/showthread.php?t=14097
But my systems keeps telling me I have still hard errors on disk2.
/var/log/messages.
Code:
Sep 22 01:29:40 san1 hastd[2254]: [disk2] (primary) Local request failed (Input/output error): WRITE(517120, 1024).
Sep 22 01:29:40 san1 hastd[2254]: [disk2] (primary) Local request failed (Input/output error): WRITE(999653106688, 1024).
Sep 22 01:29:40 san1 hastd[2254]: [disk2] (primary) Local request failed (Input/output error): WRITE(999653368832, 1024).
Sep 22 01:41:30 san1 kernel: mfid2: hard error cmd=write 1029621245-1029621246
Code:
[root@san1 /var/log]# zpool status
pool: tank
state: ONLINE
scan: resilvered 2.49M in 0h2m with 0 errors on Sat Sep 22 01:03:13 2012
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
hast/disk1 ONLINE 0 0 0
hast/disk2 ONLINE 0 0 0
hast/disk3 ONLINE 0 0 0
hast/disk4 ONLINE 0 0 0
hast/disk5 ONLINE 0 0 0
hast/disk6 ONLINE 0 0 0
hast/disk7 ONLINE 0 0 0
hast/disk8 ONLINE 0 0 0
hast/disk9 ONLINE 0 0 0
hast/disk10 ONLINE 0 0 0
errors: No known data errors
[root@san1 /var/log]#
My os:
Code:
FreeBSD san1 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012 [email]root@farrell.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC amd64
I'm sure that I'm replacing the right drive.
disk2 is the disk in question, so from the server I have pulled bay 3.
0, and 1 are for the OS. 2,3,4,5,6,7,8,9,10 are for tank pool.
Can some one point me to a site or help me out by giving me some ideas.
Thank you guys.