XOrg issues with detecting hardware, display and GPU

hyp0dermic

hyp0dermic

I am having issues with xorg + gnome not detecting my gpu + display. It works when I have no configuration files in xorg.conf.d, but only sees a generic display, and graphics output is terribly sluggish. When it is run with a xorg.conf.d file as shown:
Code: 
Section "Device"
    Identifier "Card0"
    Driver "amdgpu"
    BusID "PCI:0:10:0:0"
EndSection
it spits out this log file after immediately halting:
Xorg.0.log
Code: 
[    34.852]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[    34.852] Build Operating System: FreeBSD 12.1-RELEASE amd64
[    34.852] Current Operating System: FreeBSD hestia 12.1-RELEASE FreeBSD 12.1-RELEASE r354233 GENERIC amd64
[    34.852] Build Date: 11 July 2020  05:21:06AM
[    34.852] 
[    34.852] Current version of pixman: 0.40.0
[    34.852]     Before reporting problems, check [URL]http://wiki.x.org[/URL]
    to make sure that you have the latest version.
[    34.852] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.852] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 11 05:58:58 2020
[    34.852] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[    34.852] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[    34.853] (==) No Layout section.  Using the first Screen section.
[    34.853] (==) No screen section available. Using defaults.
[    34.853] (**) |-->Screen "Default Screen Section" (0)
[    34.853] (**) |   |-->Monitor "<default monitor>"
[    34.853] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    34.853] (**) |   |-->Device "Card0"
[    34.853] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    34.853] (==) Automatically adding devices
[    34.853] (==) Automatically enabling devices
[    34.853] (==) Not automatically adding GPU devices
[    34.853] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    34.853] (==) FontPath set to:
    /usr/local/share/fonts/misc/,
    /usr/local/share/fonts/TTF/,
    /usr/local/share/fonts/OTF/,
    /usr/local/share/fonts/Type1/,
    /usr/local/share/fonts/100dpi/,
    /usr/local/share/fonts/75dpi/,
    catalogue:/usr/local/etc/X11/fontpath.d
[    34.853] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[    34.853] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.853] (II) Loader magic: 0x42e020
[    34.853] (II) Module ABI versions:
[    34.853]     X.Org ANSI C Emulation: 0.4
[    34.853]     X.Org Video Driver: 24.1
[    34.853]     X.Org XInput driver : 24.1
[    34.853]     X.Org Server Extension : 10.0
[    34.853] (--) PCI:*(10@0:0:0) 1002:731f:1da2:e411 rev 193, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcd00000/524288, I/O @ 0x0000d000/256, BIOS @ 0x????????/65536
[    34.853] (II) LoadModule: "glx"
[    34.853] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[    34.854] (II) Module glx: vendor="X.Org Foundation"
[    34.854]     compiled for 1.20.8, module version = 1.0.0
[    34.854]     ABI class: X.Org Server Extension, version 10.0
[    34.854] (II) LoadModule: "amdgpu"
[    34.854] (II) Loading /usr/local/lib/xorg/modules/drivers/amdgpu_drv.so
[    34.854] (II) Module amdgpu: vendor="X.Org Foundation"
[    34.854]     compiled for 1.20.8, module version = 19.1.0
[    34.854]     Module class: X.Org Video Driver
[    34.854]     ABI class: X.Org Video Driver, version 24.1
[    34.854] (II) AMDGPU: Driver for AMD Radeon:
    All GPUs supported by the amdgpu kernel driver
[    34.854] (--) Using syscons driver with X support (version 2.0)
[    34.854] (--) using VT number 9

[    34.858] (EE) No devices detected.
[    34.858] (EE)
Fatal server error:
[    34.858] (EE) no screens found(EE)
[    34.858] (EE)
Please consult the The X.Org Foundation support
     at [URL]http://wiki.x.org[/URL]
for help.
[    34.858] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    34.858] (EE)
[    34.892] (EE) Server terminated with error (1). Closing log file.
I'm sorry if there is a very obvious solution, I am very new to BSD as a whole.
Thanks!
 
Last edited by a moderator:
Please post

# uname -a
# pciconf -vl | grep -B3 display
# pkg info | grep kmod
# grep kld_list /etc/rc.conf
As user(s) using xorg:
% id -p
 
Code: 
$ uname -a
FreeBSD hestia 12.1-RELEASE FreeBSD 12.1-RELEASE r354233 GENERIC  amd64

Code: 
$ pciconf -vl | grep -B3 display
vgapci0@pci0:10:0:0:    class=0x030000 card=0xe4111da2 chip=0x731f1002 rev=0xc1 hdr=0x00   
vendor     = 'Advanced Micro Devices, Inc. [AMD/ATI]'   
device     = 'Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]'   
class      = display

Code: 
$ pkg info | grep kmod
drm-fbsd12.0-kmod-4.16.g20200221 DRM modules for the linuxkpi-based KMS components
drm-kmod-g20190710             Metaport of DRM modules for the linuxkpi-based KMS components
gpu-firmware-kmod-g20200503    Firmware modules for the linuxkpi-based KMS components

Code: 
$ grep kld_list /etc/rc.conf
(no output from this one)

Code: 
$ id -p
uid     justino
groups  justino wheel video

Thank you for your time :)
 
Last edited by a moderator:
hyp0dermic said:
I am having issues with xorg + gnome not detecting my gpu + display. It works when I have no configuration files in xorg.conf.d, but only sees a generic display, and graphics output is terribly sluggish.


I would recommend to install hw-probe in order to collect hardware information and logs of your computer. Its really easy and when its uploaded you can find similar computers / resources on the database. Really handy to provide logs to the community oir order to get help :)
bsd-hardware.info

Computers

A database of all the hardware that works under bsd
bsd-hardware.info bsd-hardware.info

setup (as root)
Code: 
1) pkg install hw-probe
2) hw-probe -all -upload
Ping your URL here......
Example: my laptop is, https://bsd-hardware.info/?probe=cef5a64eb8
Click to expand...
 
hyp0dermic said:
$ uname -a
FreeBSD hestia 12.1-RELEASE FreeBSD 12.1-RELEASE r354233 GENERIC amd64


$ pciconf -vl | grep -B3 display
vgapci0@pci0:10:0:0: class=0x030000 card=0xe4111da2 chip=0x731f1002 rev=0xc1 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]'
class = display


$ pkg info | grep kmod
drm-fbsd12.0-kmod-4.16.g20200221 DRM modules for the linuxkpi-based KMS components
drm-kmod-g20190710 Metaport of DRM modules for the linuxkpi-based KMS components
gpu-firmware-kmod-g20200503 Firmware modules for the linuxkpi-based KMS components

$ grep kld_list /etc/rc.conf
(no output from this one)

$ id -p
uid justino
groups justino wheel video

Thank you for your time :)
Click to expand...
You need to add kld_list="/boot/modules/amdgpu.ko" in /etr/rc.conf
 
Last edited by a moderator:
Added that to my rc.conf, gnome started totally fine, but without any menu options or ways of starting programs. just the desktop background and an empty menu bar. I went ahead and opened a tty and added back my /usr/local/X11/xorg.conf.d/driver-amdgpu.conf as shown in the OP, and now x wont start automatically. When I run
Code: 
startx
as normal, the server fails to start. My /var/log/Xorg.0.log is as follows:
Code: 
[    31.284] X.Org X Server 1.20.8X Protocol Version 11, Revision 0
[    31.284] Build Operating System: FreeBSD 12.1-RELEASE amd64 
[    31.284] Current Operating System: FreeBSD hestia 12.1-RELEASE FreeBSD 12.1-RELEASE r354233 GENERIC amd64
[    31.284] Build Date: 11 July 2020  05:21:06AM
[    31.284]  
[    31.284] Current version of pixman: 0.40.0
[    31.284]    Before reporting problems, check [URL]http://wiki.x.org[/URL]
        to make sure that you have the latest version.
[    31.284] Markers: (--) probed, (**) from config file, (==) default setting,        
        (++) from command line, (!!) notice, (II) informational,        
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.284] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 11 18:13:52 2020
[    31.284] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[    31.284] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[    31.284] (==) No Layout section.  Using the first Screen section.
[    31.284] (==) No screen section available. Using defaults.
[    31.284] (**) |-->Screen "Default Screen Section" (0)
[    31.284] (**) |   |-->Monitor "<default monitor>"
[    31.285] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    31.285] (**) |   |-->Device "Card0"
[    31.285] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    31.285] (==) Automatically adding devices
[    31.285] (==) Automatically enabling devices
[    31.285] (==) Not automatically adding GPU devices
[    31.285] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    31.285] (==) FontPath set to:
        /usr/local/share/fonts/misc/,
        /usr/local/share/fonts/TTF/,
        /usr/local/share/fonts/OTF/,
        /usr/local/share/fonts/Type1/,
        /usr/local/share/fonts/100dpi/,
        /usr/local/share/fonts/75dpi/,
        catalogue:/usr/local/etc/X11/fontpath.d
[    31.285] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[    31.285] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.285] (II) Loader magic: 0x42e020
[    31.285] (II) Module ABI versions:
[    31.285]    X.Org ANSI C Emulation: 0.4
[    31.285]    X.Org Video Driver: 24.1
[    31.285]    X.Org XInput driver : 24.1
[    31.285]    X.Org Server Extension : 10.0
[    31.285] (--) PCI:*(10@0:0:0) 1002:731f:1da2:e411 rev 193, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcd00000/524288, I/O @ 0x0000d000/256, BIOS @ 0x????????/65536
[    31.285] (II) LoadModule: "glx"
[    31.285] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[    31.286] (II) Module glx: vendor="X.Org Foundation"
[    31.286]    compiled for 1.20.8, module version = 1.0.0
[    31.286]    ABI class: X.Org Server Extension, version 10.0
[    31.286] (II) LoadModule: "amdgpu"
[    31.286] (II) Loading /usr/local/lib/xorg/modules/drivers/amdgpu_drv.so
[    31.286] (II) Module amdgpu: vendor="X.Org Foundation"
[    31.286]    compiled for 1.20.8, module version = 19.1.0
[    31.286]    Module class: X.Org Video Driver
[    31.286]    ABI class: X.Org Video Driver, version 24.1
[    31.286] (II) AMDGPU: Driver for AMD Radeon:
        All GPUs supported by the amdgpu kernel driver
[    31.286] (--) Using syscons driver with X support (version 2.0)
[    31.286] (--) using VT number 9
[    31.288] (EE) No devices detected.
[    31.288] (EE)Fatal server error:
[    31.288] (EE) no screens found(EE)
[    31.288] (EE)Please consult the The X.Org Foundation support
         at [URL]http://wiki.x.org[/URL] for help.
[    31.288] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    31.289] (EE)
[    31.297] (EE) Server terminated with error (1). Closing log file.
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top