Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2167.61-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3940421632 (3757 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO CB-01 >
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-86 on motherboard
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1083804306 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO CB-01> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 109fffff vs 10a00000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3050-0x3057 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x3048-0x304f,0x305c-0x305f,0x3040-0x3047,0x3058-0x305b,0x3020-0x303f mem 0x90914000-0x909147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
ppt0 mem 0x90910000-0x90913fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib2
pci1: <unknown> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib3
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0x90504000-0x90504fff,0x90500000-0x90503fff irq 18 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 1c:39:47:18:f6:24
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib4
pci3: <network> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000LPCX-24C6HT0 02.01A02> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WXA1A85KA0JN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ada0s2a [rw]...
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD-RW DA8A6SH GC11> Removable CD-ROM SCSI device
cd0: Serial Number DX0H52662L1CB59000D8
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM_PART: integrity check failed (ada0s1, BSD)
uhub0: 7 ports with 7 removable, self powered
GEOM_PART: integrity check failed (diskid/DISK-WD-WXA1A85KA0JNs1, BSD)
ugen0.2: <Logitech USB Optical Mouse> at usbus0
ugen0.3: <Azurewave Lenovo EasyCamera> at usbus0
Setting hostuuid: fd463391-619f-11e5-90ab-1c394718f624.
Setting hostid: 0xce405af1.
Starting file system checks:
/dev/ada0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2a: clean, 322160 free (320 frags, 40230 blocks, 0.1% fragmentation)
/dev/ada0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2d: clean, 63686 free (518 frags, 7896 blocks, 0.1% fragmentation)
/dev/ada0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2e: clean, 78198 free (38 frags, 9770 blocks, 0.0% fragmentation)
/dev/ada0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2f: clean, 63597452 free (11884 frags, 7948196 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/nss /usr/local/lib/perl5/5.26/mach/CORE /usr/local/llvm40/lib /usr/local/llvm50/lib /usr/local/llvm60/lib
random: unblocking device.
32-bit compatibility ldconfig path: /usr/lib32
Setting hostname: fbsd3.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
re0: link state changed to DOWN
Starting Network: lo0 re0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 1c:39:47:18:f6:24
hwaddr 1c:39:47:18:f6:24
inet 192.168.1.210 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting devd.
ums0 on uhub0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/53.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Starting ums0 moused.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 192.168.1.1
Additional inet routing options: gateway=YES.
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
Flushed all rules.
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
00400 deny ip from any to ::1
00500 deny ip from ::1 to any
00600 allow ipv6-icmp from :: to ff02::/16
00700 allow ipv6-icmp from fe80::/10 to fe80::/10
00800 allow ipv6-icmp from fe80::/10 to ff02::/16
00900 allow ipv6-icmp from any to any ip6 icmp6types 1
01000 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136
ipfw nat 123 config if re0 log
00050 nat 123 ip4 from any to any via re0
65000 allow ip from any to any
Firewall rules loaded.
Starting local_unbound.
Waiting for nameserver to start... good
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
bridge0: Ethernet address: 02:ce:40:5a:f1:00
bridge0: changing name to 'vm-sw-a'
re0: promiscuous mode enabled
vm-sw-a: link state changed to DOWN
Clearing /tmp (X related).
Starting dbus.
Updating motd:.
Mounting late filesystems:.
Configuring syscons: keymap
re0: link state changed to UP
vm-sw-a: link state changed to UP
blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.
Thu Nov 15 19:01:04 CET 2018
Nov 15 19:01:13 fbsd3 login: ROOT LOGIN (root) ON ttyv0
Nov 15 19:53:01 fbsd3 su: BAD SU pierre to root on /dev/ttyv0
Nov 15 19:53:10 fbsd3 su: pierre to root on /dev/ttyv0
info: [drm] Initialized drm 1.1.0 20060810