[root@ghost /home/ghost]# dmesg
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p11 #0: Thu Jun 21 03:46:08 UTC 2018
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2605.96-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x60fb2 Family=0xf Model=0x6b Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
SVM: NAsids=64
real memory = 4294967296 (4096 MB)
avail memory = 4096249856 (3906 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5ec40, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 2ec00000 vs 2ed10000
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1
vgapci0: Boot video device
ahci0: <AMD SB600 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x7000<NOMSI,ATI_PMP_BUG,MAXIO_64K>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0
usbus2 on ohci2
usbus2: 12Mbps Full Speed USB v1.0
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0
usbus3 on ohci3
usbus3: 12Mbps Full Speed USB v1.0
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0
usbus4 on ohci4
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
hdac0: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xde00-0xdeff mem 0xfdfff000-0xfdfff0ff irq 23 at device 15.0 on pci2
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:1a:4d:f8:5a:d2
re0: netmap queues/slots: TX 1/256, RX 1/256
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <Realtek ALC888 HDA CODEC> at cad 3 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC888 (Rear Digital)> at nid 30 and 31 on hdaa0
ugen5.1: <ATI EHCI root HUB> at usbus5
ugen4.1: <ATI OHCI root HUB> at usbus4
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen2.1: <ATI OHCI root HUB> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
(aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
(aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich2:0:15:0): CAM status: Command timeout
(aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
(aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich2:0:15:0): CAM status: Command timeout
(aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HDT721010SLA360 ST6OA31B> ATA8-ACS SATA 2.x device
ada0: Serial Number STH607MS1Y918S
cd0 at ata0 bus 0 scbus4 target 0 lun 0
ada0: 300.000MB/s transferscd0: (<HL-DT-ST CD-RW GCE-8240B 1.06> Removable CD-ROM SCSI device
SATA 2.x, cd0: 16.700MB/s transfersUDMA6, (WDMA2, PIO 8192bytesATAPI 12bytes, )
PIO 65534bytesada0: Command Queueing enabled
)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: 953868MB (1953523055 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <Hitachi HDT721010SLA360 ST6OA31B> ATA8-ACS SATA 2.x device
ada1: Serial Number STF6L7MS281K9K
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953868MB (1953523055 512 byte sectors)
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
WARNING: /: TRIM flag on fs but disk does not support TRIM
uhub0: 10 ports with 10 removable, self powered
ugen0.2: <B16b02 USB-PS2 Optical Mouse> at usbus0
ugen5.2: <HP Photosmart B110 series> at usbus5
umass0 on uhub0
umass0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00, addr 2> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <HP Photosmart B110 1.00> Removable Direct Access SPC-3 SCSI device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Cuse v0.1.34 @ /dev/cuse
re0: link state changed to DOWN
ugen1.2: <Hewlett-Packard DeskJet 940C> at usbus1
ugen5.3: <Ralink 802.11 n WLAN> at usbus5
ums0 on uhub5
ums0: <B16b02 USB-PS2 Optical Mouse, class 0/0, rev 2.00/98.02, addr 2> on usbus0
ums0: 4 buttons and [XYZ] coordinates ID=0
ulpt0 on uhub0
ulpt0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00, addr 2> on usbus5
ulpt0: using bi-directional mode
ulpt0: output error
ulpt1 on uhub4
ulpt1: <Hewlett-Packard DeskJet 940C, class 0/0, rev 1.10/1.00, addr 2> on usbus1
ulpt1: using bi-directional mode
re0: link state changed to UP