Hey everybody, I just threw freebsd 7.1 on my server to replace Debian, and I have hit a snag...
The system is a dual quad core, currently only with 4GB of ram, and a 3ware 9650se-12 raid card with 7 750GB drives hooked to it in raid-6. With linux I could easily get around 100+MB/sec writing, but right now I'm only capable of getting around 2-3Mb/sec with freebsd. The array is partitioned with GPT with one partition using the whole 3.4TB and then i just ran newfs on the single partition.
I ran Bonnie++ and here are the results:
Right now it's running 7.1-Release and I just realized there are some patches i need to apply, but I doubt that's going to fix my problem
Here's the tw_cli output
If you have any advice I would appreciate it, I'm pulling my hair out right now
Thanks
James
The system is a dual quad core, currently only with 4GB of ram, and a 3ware 9650se-12 raid card with 7 750GB drives hooked to it in raid-6. With linux I could easily get around 100+MB/sec writing, but right now I'm only capable of getting around 2-3Mb/sec with freebsd. The array is partitioned with GPT with one partition using the whole 3.4TB and then i just ran newfs on the single partition.
I ran Bonnie++ and here are the results:
Code:
Writing a byte at a time...done
Writing intelligently...done
Rewriting...done
Reading a byte at a time...done
Reading intelligently...done
start 'em...done...done...done...done...done...
Create files in sequential order...done.
Stat files in sequential order...done.
Delete files in sequential order...done.
Create files in random order...done.
Stat files in random order...done.
Delete files in random order...done.
Version 1.93d ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
me.c 8G 450 98 3110 0 3152 1 762 98 266188 54 374.0 12
Latency 36924us 735ms 12761ms 26482us 148ms 65865us
Version 1.93d ------Sequential Create------ --------Random Create--------
me.com -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 26 0 +++++ +++ 57 0 26 0 +++++ +++ 50 0
Latency 2075ms 16us 491ms 460ms 29us 3713ms
1.93c,1.93d,me.com,1,1241508767,8G,,450,98,3110,0,3152,1,762,98,266188,54,374.0,12,16,,,,,26,0,+++++,+++,57,0,26,0,+++++,+++,50,0,36924us,735ms,12761ms,26482us,148ms,65865us,2075ms,16us,491ms,460ms,29us,3713ms
Right now it's running 7.1-Release and I just realized there are some patches i need to apply, but I doubt that's going to fix my problem
Here's the tw_cli output
Code:
### CLI Version: x86_64 (64 bit)
### Time Stamp: 15:33.04 04-May-2009
### Host Name: me.com
### OS Version: FreeBSD 7.1-RELEASE
### Driver Version: 3.70.05.001
### Controller ID: 0
### Model: 9650SE-12ML
### Firmware: FE9X 4.06.00.004
### BIOS: BE9X 4.05.00.015
### Serial #: L322605A8020287
### Available Memory: 224MB
==========================================================================
Diagnostic Information on Controller //me.com/c0 ...
--------------------------------------------------------------------------
No print log has been saved yet.
BBU status word : 0x0
If you have any advice I would appreciate it, I'm pulling my hair out right now
Thanks
James