I have a Toshiba Satellite L755-S5246 that I am configuring FreeBSD 11.2. Most everything is working, but I cannot get the system to show any battery information. I know the battery works - if I unplug the power, the computer stays on, and when Windows was installed, it did show battery information. It is an aftermarket battery, but I wouldn't think that would make a difference.
When I run
When I run
Using KSystemlog, I checked the system logs, and filtered for "ACPI" and got this:
Any help?
When I run
acpiconf -i 0
, this is what I get:
Code:
Design capacity: 0 mWh
Last full capacity: 0 mWh
Technology: primary (non-rechargeable)
Design voltage: 0 mV
Capacity (warn): 0 mWh
Capacity (low): 0 mWh
Low/warn granularity: 0 mWh
Warn/full granularity: 0 mWh
Model number:
Serial number:
Type:
OEM info:
State: not present
Present voltage: unknown
When I run
sysctl -a | grep -i battery
, this is what I get:
Code:
hw.acpi.battery.info_expire: 5
hw.acpi.battery.units: 1
hw.acpi.battery.state: 7
hw.acpi.battery.time: -1
hw.acpi.battery.life: -1
dev.battery.0.%parent: acpi0
dev.battery.0.%pnpinfo: _HID=PNP0C0A _UID=1
dev.battery.0.%location: handle=\_SB_.BAT1
dev.battery.0.%driver: battery
dev.battery.0.%desc: ACPI Control Method Battery
dev.battery.%parent:
Using KSystemlog, I checked the system logs, and filtered for "ACPI" and got this:
Code:
26 Jul 2018 08:35:47 beastie kernel Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
26 Jul 2018 08:35:47 beastie kernel ACPI APIC Table: <TOSQCI TOSQCI00>
26 Jul 2018 08:35:47 beastie kernel acpi0: <TOSQCI TOSQCI00> on motherboard
26 Jul 2018 08:35:47 beastie kernel acpi0: Power Button (fixed)
26 Jul 2018 08:35:47 beastie kernel cpu0: <ACPI CPU> on acpi0
26 Jul 2018 08:35:47 beastie kernel cpu1: <ACPI CPU> on acpi0
26 Jul 2018 08:35:47 beastie kernel cpu2: <ACPI CPU> on acpi0
26 Jul 2018 08:35:47 beastie kernel cpu3: <ACPI CPU> on acpi0
26 Jul 2018 08:35:47 beastie kernel hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
26 Jul 2018 08:35:47 beastie kernel atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
26 Jul 2018 08:35:47 beastie kernel attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
26 Jul 2018 08:35:47 beastie kernel Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
26 Jul 2018 08:35:47 beastie kernel acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
26 Jul 2018 08:35:47 beastie kernel acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0
26 Jul 2018 08:35:47 beastie kernel pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
26 Jul 2018 08:35:47 beastie kernel pci0: <ACPI PCI bus> on pcib0
26 Jul 2018 08:35:47 beastie kernel pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
26 Jul 2018 08:35:47 beastie kernel pci1: <ACPI PCI bus> on pcib1
26 Jul 2018 08:35:47 beastie kernel pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0
26 Jul 2018 08:35:47 beastie kernel pci2: <ACPI PCI bus> on pcib2
26 Jul 2018 08:35:47 beastie kernel pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0
26 Jul 2018 08:35:47 beastie kernel pci3: <ACPI PCI bus> on pcib3
26 Jul 2018 08:35:47 beastie kernel acpi_acad0: <AC Adapter> on acpi0
26 Jul 2018 08:35:47 beastie kernel battery0: <ACPI Control Method Battery> on acpi0
26 Jul 2018 08:35:47 beastie kernel acpi_button0: <Power Button> on acpi0
26 Jul 2018 08:35:47 beastie kernel acpi_lid0: <Control Method Lid Switch> on acpi0
26 Jul 2018 08:35:47 beastie kernel atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Any help?