Something, it looks like it might be a sentence or two, appears and disappears too quickly to read. I'm using an external display but nothing appears on either it or the laptop screen. Then, after about 10 secs the boot messages begin in 800x600.
After that, i915kms (installed from drm-next-kmod port) loads later and things look nice in console and xorg.
Is there something I need to put in loader.conf? I tried kern.vty=vt, but nothing changed.
The native resolution of the laptop screen is 1080x1920.
Should I try setting kern.vt.fb.default_mode?
/var/run/dmesg.boot says when i915kms loads:
After that, i915kms (installed from drm-next-kmod port) loads later and things look nice in console and xorg.
Is there something I need to put in loader.conf? I tried kern.vty=vt, but nothing changed.
The native resolution of the laptop screen is 1080x1920.
Should I try setting kern.vt.fb.default_mode?
/var/run/dmesg.boot says when i915kms loads:
Code:
[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 4096M
Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xc0240000 vbase=0xfffff800c0240000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2
[drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[drm] RC6 on