Hello,
I dont't know is this right place to discus...
I have 2 computers built on two different Asus motherboards doing same with new (Green)Seagate Barakuda hard drives (Model Number: ST1000DM010 / Family: BARRACUDA35) - hard drives randomly disconnects and reconnects .
This starts after replacing old faulty hard drives with new ones. The replacement happened on two machines within 2 months apart, with the hard drives bought from different distributors. Smart reports doesn't show any issues.
The Old seagate drives (not green ones) inside at the same time never had that issue.
I catch this event once, and it sounds like normal hard drive [spin down]->[park]->[spin up] several times in a row, no other weird noises. The BIOS on both machines has been updated to the latest version available, it doesn't make any effect.
both hard drives ware tested under linux (latest sysrescuecd live),whdd, read/write of huge files, idle,.... for 2 days (one drive is still running for now) - with 0 issues
here is what I got in dmesg for one of the disk:
I don't know what to think, if you have some ideas please share.
OS: FreeBSD 11.2-RELEASE, amd64
Thanks in advance
I dont't know is this right place to discus...
I have 2 computers built on two different Asus motherboards doing same with new (Green)Seagate Barakuda hard drives (Model Number: ST1000DM010 / Family: BARRACUDA35) - hard drives randomly disconnects and reconnects .
This starts after replacing old faulty hard drives with new ones. The replacement happened on two machines within 2 months apart, with the hard drives bought from different distributors. Smart reports doesn't show any issues.
The Old seagate drives (not green ones) inside at the same time never had that issue.
I catch this event once, and it sounds like normal hard drive [spin down]->[park]->[spin up] several times in a row, no other weird noises. The BIOS on both machines has been updated to the latest version available, it doesn't make any effect.
both hard drives ware tested under linux (latest sysrescuecd live),whdd, read/write of huge files, idle,.... for 2 days (one drive is still running for now) - with 0 issues
here is what I got in dmesg for one of the disk:
Code:
...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM010-2EP102 CC43> s/n Z9AAWW59 detached
g_access(944): provider ada0 has error 6 set
g_access(944): provider ada0 has error 6 set
g_access(944): provider ada0 has error 6 set
g_access(944): provider ada0 has error 6 set
(ada0:ahcich0:0:0:0): Periph destroyed
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM010-2EP102 CC43> ATA8-ACS SATA 3.x device
ada0: Serial Number Z9AAWW59
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM010-2EP102 CC43> s/n Z9AAWW59 detached
g_access(944): provider ada0 has error 6 set
g_access(944): provider ada0 has error 6 set
g_access(944): provider ada0 has error 6 set
g_access(944): provider ada0 has error 6 set
...
I don't know what to think, if you have some ideas please share.
OS: FreeBSD 11.2-RELEASE, amd64
Thanks in advance