MMC: emmc2@7e340000: 0, mmc@7e300000: 1
Loading Environment from FAT... In: serial
Out: serial
Err: serial
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk
emmc2@7e340000.blk...
Scanning disk
mmc@7e300000.blk...
Disk
mmc@7e300000.blk not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
678800 bytes read in 78 ms (8.3 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Loading kernel...
/boot/kernel/kernel text=0x98e51c data=0x1900a8 data=0x0+0x79d260 syms=[0x8+0x145a58+0x8+0x12fb47]
Loading configured modules...
/boot/kernel/umodem.ko text=0x2100 text=0x13a0 data=0x6e0+0x10 syms=[0x8+0xf48+0x8+0xb6e]
/boot/entropy size=0x1000
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x7ef2000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r357013M: Thu Jan 23 19:55:28 UTC 2020
root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-MMCCAM arm64
FreeBSD clang version 9.0.1 (
git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39f53000 mode 2 pages 1
MAP 39f57000 mode 2 pages 1
MAP 3b360000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version number mismatched with DT
device_attach: psci0 attach returned 6
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 26 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 38 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
mmc_alloc_device()
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
mmc_alloc_device()
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: changing fb bpp from 0 to 24
mbox0: mbox response error
fb0: bcm2835_mbox_fb_init failed, err=5
device_attach: fb0 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led1> failed to map pin
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
mmc_dev_async(async_code=0x20, path_id=0, target_id=0, lun_id=0
Got AC_PATH_REGISTERED -- whatever...
mmc_dev_async(async_code=0x20, path_id=0, target_id=ffffffff, lun_id=ffffffff
mmc_dev_async(async_code=0x20, path_id=1, target_id=0, lun_id=0
Got AC_PATH_REGISTERED -- whatever...
mmc_dev_async(async_code=0x20, path_id=1, target_id=ffffffff, lun_id=ffffffff
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usb_needs_explore_all: no devclass
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
(noperiph:sdhci_slot0:0:-1:ffffffff): XPT_SCAN_{BUS,TGT,LUN}
(noperiph:sdhci_slot0:0:0:0): XPT_SCAN_{BUS,TGT,LUN}
(noperiph:sdhci_slot0:0:0:0): Set up the mmcprobe device...
(mmcprobe0:sdhci_slot0:0:0:0): Periph created
(mmcprobe0:sdhci_slot0:0:0:0): Probe started
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_INVALID to PROBE_RESET
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_RESET
sdhci_bcm0-slot0: Clock => 0
sdhci_bcm0-slot0: VDD => 21
sdhci_bcm0-slot0: CS => 0
sdhci_bcm0-slot0: Bus width => 0
sdhci_bcm0-slot0: Power mode => 1
sdhci_bcm0-slot0: Bus mode => 1
sdhci_bcm0-slot0: sdhci_cam_update_ios: power_mode=1, clk=0, bus_width=0, timing=0
Release APs...Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Root mount waiting for: CAM
sdhci_bcm0-slot0: Clock => 400000
sdhci_bcm0-slot0: Power mode => 2
sdhci_bcm0-slot0: Timing => 0
sdhci_bcm0-slot0: sdhci_cam_update_ios: power_mode=2, clk=400000, bus_width=0, timing=0
sdhci_bcm0-slot0: CS => 1
sdhci_bcm0-slot0: sdhci_cam_update_ios: power_mode=2, clk=400000, bus_width=0, timing=0
(mmcprobe0:sdhci_slot0:0:0:0): Send first XPT_MMC_IO
(noperiph:sdhci_slot1:0:-1:ffffffff): XPT_SCAN_{BUS,TGT,LUN}
(noperiph:sdhci_slot1:0:0:0): XPT_SCAN_{BUS,TGT,LUN}
(noperiph:sdhci_slot1:0:0:0): Set up the mmcprobe device...
(mmcprobe1:sdhci_slot1:0:0:0): Periph created
(mmcprobe1:sdhci_slot1:0:0:0): Probe started
(mmcprobe1:sdhci_slot1:0:0:0): Probe PROBE_INVALID to PROBE_RESET
(mmcprobe1:sdhci_slot1:0:0:0): mmcprobe_start
(mmcprobe1:sdhci_slot1:0:0:0): Start with PROBE_RESET
sdhci_bcm1-slot0: Clock => 0
sdhci_bcm1-slot0: VDD => 21
sdhci_bcm1-slot0: CS => 0
sdhci_bcm1-slot0: Bus width => 0
sdhci_bcm1-slot0: Power mode => 1
sdhci_bcm1-slot0: Bus mode => 1
sdhci_bcm1-slot0: sdhci_cam_update_ios: power_mode=1, clk=0, bus_width=0, timing=0
APs not started
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: (null) (null) r0p0 affinity: 0
CPU 2: (null) (null) r0p0 affinity: 0
CPU 3: (null) (null) r0p0 affinity: 0
WARNING: WITNESS option enabled, expect reduced performance.
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done
Starting completion of PROBE_RESET
(mmcprobe0:sdhci_slot0:0:0:0): done with PROBE_RESET
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_RESET to PROBE_SEND_IF_COND
mmc_probedone: remaining freezecnt 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SEND_IF_COND
sdhci_bcm1-slot0: Clock => 399361
sdhci_bcm1-slot0: Power mode => 2
sdhci_bcm1-slot0: Timing => 0
sdhci_bcm1-slot0: sdhci_cam_update_ios: power_mode=2, clk=399361, bus_width=0, timing=0
Root mount waiting for: CAM
sdhci_bcm1-slot0: CS => 1
sdhci_bcm1-slot0: sdhci_cam_update_ios: power_mode=2, clk=399361, bus_width=0, timing=0
(mmcprobe1:sdhci_slot1:0:0:0): Send first XPT_MMC_IO
mountroot: waiting for device /dev/ufs/rootfs...
Mounting from ufs:/dev/ufs/rootfs failed with error 19.
Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/rootfs
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot> sdhci_bcm0-slot0: Controller timeout
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00001002
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000000
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00007d07
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000001
sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525
sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_bcm0-slot0: ===========================================
sdhci_bcm1-slot0: Controller timeout
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0001 | Host ctl: 0x00000000
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00038000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_bcm1-slot0: ===========================================
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done
(mmcprobe0:sdhci_slot0:0:0:0): IF_COND: error 1, pattern 00000000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_IF_COND to PROBE_SDIO_RESET
mmc_probedone: remaining freezecnt 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_RESET
(mmcprobe1:sdhci_slot1:0:0:0): mmcprobe_done
Starting completion of PROBE_RESET
(mmcprobe1:sdhci_slot1:0:0:0): done with PROBE_RESET
(mmcprobe1:sdhci_slot1:0:0:0): GO_IDLE_STATE failed with error 1
(mmcprobe1:sdhci_slot1:0:0:0): Probe PROBE_RESET to PROBE_INVALID
mmc_probedone: remaining freezecnt 0
(mmcprobe1:sdhci_slot1:0:0:0): Periph invalidated
(mmcprobe1:sdhci_slot1:0:0:0): Periph destroyed
?
List of GEOM managed disk devices:
mountroot> sdhci_bcm0-slot0: Controller timeout
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00001002
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x88000c08 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000000
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00007d07
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00018000
sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525
sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_bcm0-slot0: ===========================================
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done
(mmcprobe0:sdhci_slot0:0:0:0): SDIO_RESET: error 1, CCCR CTL register: 00000000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_RESET to PROBE_SDIO_INIT
mmc_probedone: remaining freezecnt 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_INIT
?
List of GEOM managed disk devices:
mountroot> ?
List of GEOM managed disk devices:
mountroot>
panic: mountroot: unable to (re-)mount root.
cpuid = 0
time = 32
KDB: stack backtrace:
db_trace_self() at db_trace_self_wrapper+0x28
pc = 0xffff00000073c68c lr = 0xffff000000110570
sp = 0xffff000040265370 fp = 0xffff000040265580
db_trace_self_wrapper() at vpanic+0x194
pc = 0xffff000000110570 lr = 0xffff00000040b03c
sp = 0xffff000040265590 fp = 0xffff000040265640
vpanic() at panic+0x44
pc = 0xffff00000040b03c lr = 0xffff00000040ade4
sp = 0xffff000040265650 fp = 0xffff0000402656d0
panic() at vfs_mountroot+0x1558
pc = 0xffff00000040ade4 lr = 0xffff0000004d1950
sp = 0xffff0000402656e0 fp = 0xffff000040265880
vfs_mountroot() at start_init+0x28
pc = 0xffff0000004d1950 lr = 0xffff0000003a3cec
sp = 0xffff000040265890 fp = 0xffff000040265940
start_init() at fork_exit+0x7c
pc = 0xffff0000003a3cec lr = 0xffff0000003ca2f8
sp = 0xffff000040265950 fp = 0xffff000040265980
fork_exit() at fork_trampoline+0x10
pc = 0xffff0000003ca2f8 lr = 0xffff0000007592cc
sp = 0xffff000040265990 fp = 0x0000000000000000
KDB: enter: panic
[ thread pid 1 tid 100002 ]
Stopped at 0
db>