So I was gonna check the CPU temperature when the system crashed, because of page fault according to the message. And so I powered the server down and rearranged some sata cables, because I've been getting some data errors lately(and scrub fixed). And I read somewhere that strapping sata cables together is a bad thing(no shielding apparently). And after some unstrapping/rearranging(of cables) I turned the server on. And now it says something like this:
From what I've been reading this might have something to do with the rearranging or me just not knowing what is what... oh, by the way I run zfs v13 and freebsd 8.0 release. And I use the server as a router/gateway and file server. And I do NOT have backup.
First post so I hope I did the posting "right".
Code:
Window# zpool status
pool: storagepool
state: UNAVAIL
status: One or more devices could not be used because the label is missing
or invalid. There are insufficient replicas for the pool to continue
functioning.
action: Destroy and re-create the pool from a backup source.
see: http://www.sun.com/msg/ZFS-8000-5E
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
storagepool UNAVAIL 0 0 0 insufficient replicas
raidz1 FAULTED 0 0 0 insufficient replicas
ad2 FAULTED 0 0 0 corrupted data
ad3 FAULTED 0 0 0 corrupted data
ad4 FAULTED 0 0 0 corrupted data
ad6 FAULTED 0 0 0 corrupted data
ad8 FAULTED 0 0 0 corrupted data
ad10 FAULTED 0 0 0 corrupted data
Window#
From what I've been reading this might have something to do with the rearranging or me just not knowing what is what... oh, by the way I run zfs v13 and freebsd 8.0 release. And I use the server as a router/gateway and file server. And I do NOT have backup.
First post so I hope I did the posting "right".