Hi,
i just tried to install FreeBSD on a new Lenovo laptop (see details below).
But it seems I'm unable to get the wifi interface to work.
It simply doesn't appear at "ifconfig", there is only "lo0"
As this laptop doesn't have a ethernet input, it's impossible to go on with installing by cable.
I've tried to add the following lines to /boot/loader.conf, but nothing worked:
(I know some of them probably make no sense, but i only tried because i didn't know what else to try...)
pciconf -lvc showed:
After booting a live Mint linux I could extract the following system information:
After searching I only found that it probably might not work, as FreeBSD doesn't offer good support for most wifi card.
So, is it generally possible to get the onboard wlan to run (I don't want to buy a usb wlan adapter) ?
As a general question: Is this laptop suitable for a FreeBSD desktop system, or should i look for other hardware?
Please help me, I'm stuck.
Greetings
i just tried to install FreeBSD on a new Lenovo laptop (see details below).
But it seems I'm unable to get the wifi interface to work.
It simply doesn't appear at "ifconfig", there is only "lo0"
As this laptop doesn't have a ethernet input, it's impossible to go on with installing by cable.
I've tried to add the following lines to /boot/loader.conf, but nothing worked:
(I know some of them probably make no sense, but i only tried because i didn't know what else to try...)
Code:
if_rtwn_pci_load="YES"
if_rtwn_usb_load="YES"
if_ath_load="YES"
if_re_load="YES"
if_wi_load="YES"
if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"
pciconf -lvc showed:
Code:
none1@pci0:2:0:0 class=0x28000 rev=0x00 hdr=0x00 vendor=0x10ec device=0xc822 subvendor=0x17aa subdevice=0xc123
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8822CE 802.11ac PCIe Wireless Network Adapter'
class = network
After booting a live Mint linux I could extract the following system information:
Code:
System:
Kernel: 5.4.0-58-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Xfce 4.14.2 Distro: Linux Mint 20.1 Ulyssa
base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: LENOVO product: 82C7 v: Lenovo V15-ADA
serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: SDK0J40700WIN serial: <filter>
UEFI [Legacy]: LENOVO v: E8CN25WW date: 10/13/2020
Battery:
ID-1: BAT0 charge: 35.9 Wh condition: 35.9/35.0 Wh (103%)
model: SMP L16M2PB2 status: Full
CPU:
Topology: Dual Core model: AMD Athlon Gold 3150U with Radeon Graphics
bits: 64 type: MT MCP arch: Zen+ rev: 1 L2 cache: 1024 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 19164
Speed: 1692 MHz min/max: 1400/2400 MHz Core speeds (MHz): 1: 2274 2: 1852
3: 1521 4: 1589
Graphics:
Device-1: AMD Picasso vendor: Lenovo driver: amdgpu v: kernel
bus ID: 03:00.0
Display: x11 server: X.Org 1.20.8 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD RAVEN2 (DRM 3.35.0 5.4.0-58-generic LLVM 10.0.0)
v: 4.6 Mesa 20.0.8 direct render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus ID: 03:00.1
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
vendor: Lenovo driver: N/A bus ID: 03:00.5
Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel
v: kernel bus ID: 03:00.6
Sound Server: ALSA v: k5.4.0-58-generic
Network:
Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Lenovo driver: rtw_pci v: N/A port: 2000 bus ID: 02:00.0
IF: wlp2s0 state: up mac: <filter>
Drives:
Local Storage: total: 267.39 GiB used: 7.91 GiB (3.0%)
ID-1: /dev/nvme0n1 vendor: SK Hynix model: HFM256GDHTNI-87A0B
size: 238.47 GiB
ID-2: /dev/sda type: USB vendor: HP model: v212w size: 28.91 GiB
Partition:
ID-1: / size: 2.79 GiB used: 110.0 MiB (3.9%) fs: overlay source: ERR-102
ID-2: /var/log size: 26.54 GiB used: 44.6 MiB (0.2%) fs: ext4
dev: /dev/sda3
Sensors:
System Temperatures: cpu: 42.1 C mobo: N/A gpu: amdgpu temp: 42 C
Fan Speeds (RPM): N/A
Info:
Processes: 236 Uptime: 11m Memory: 5.58 GiB used: 1.46 GiB (26.2%)
Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
inxi: 3.0.38
After searching I only found that it probably might not work, as FreeBSD doesn't offer good support for most wifi card.
So, is it generally possible to get the onboard wlan to run (I don't want to buy a usb wlan adapter) ?
As a general question: Is this laptop suitable for a FreeBSD desktop system, or should i look for other hardware?
Please help me, I'm stuck.
Greetings