ive been following this guide: https://www.cyberciti.biz/faq/configuring-freebsd-12-vnet-jail-using-bridgeepair-zfs/ however i am using 13.2, not 12. so maybe thats where the issue came from, although i did change the commands to 13.2 instead of 12.2. anyways. ive literally followed all of that guide, ive done all this:
and done everything else that the guy has gone through. however, when i try to start the jail, im just met with this:
this is what comes up when i do ifconfig:
here's my hosts rc.conf too if it helps:
Anyone have any ideas as to how I can get this working? Anything would be appreciated
Code:
# zfs send -R zroot/jails/fullbasejail@12.2-RELEASE-p2 | zfs receive zroot/jails/mail
# zfs send -R zroot/jails/fullbasejail@12.2-RELEASE-p2 | zfs receive zroot/jails/www
# zfs send -R zroot/jails/fullbasejail@12.2-RELEASE-p2 | zfs receive zroot/jails/db
## CLONE ##
# zfs clone zroot/jails/fullbasejail@12.2-RELEASE-p2 zroot/jails/vpn
Code:
root@host:/usr/home/tom # service jail start
Starting jails:demojail: created
jail: demojail: getpwnam root: No such file or directory
jail: demojail: /bin/sh /etc/rc: failed
demojail: removed
Code:
vtnet0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4c07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,TXCSUM_IPV6>
ether de:fe:a1:b9:0c:c3
inet 10.1.0.134 netmask 0xffffff00 broadcast 10.1.0.255
media: Ethernet autoselect (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 58:9c:fc:00:56:26
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
groups: bridge
nd6 options=9<PERFORMNUD,IFDISABLED>
epair0b: flags=8862<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:74:fe:1a:03:0b
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair0a: flags=8862<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:74:fe:1a:03:0a
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
here's my hosts rc.conf too if it helps:
Code:
ifconfig_vtnet0="inet 10.1.0.134 netmask 255.255.255.0"
defaultrouter="10.1.0.250"
sshd_enable="YES"
dumpdev="AUTO"
zfs_enable="YES"
jail_enable="YES"
jail_parallel_start="YES"
pf_enable="NO"
gateway_enable="YES"
apache24_enable="YES"
hostname="host"
kld_list="if_bridge if_epair"
ifconfig_em0="DHCP"
cloned_interfaces="bridge0 epair0a epair0b"
ifconfig_bridge0="addm re0 up"
Anyone have any ideas as to how I can get this working? Anything would be appreciated