Trying to compile NanoBSD with FreeBSD9-STABLE and when I run the nanobsd.sh script, compilation halts indefintely with an error:
I have assigned a GB of swap (ada0p3) of which only 1% is used, and also a GB of physical RAM to FBSD9.
Smartctl gives the folowing summary:
I am running FBSD9-amd64 under qemu-kvm
Hint to overcome this problem appreciated. Thanks!
Code:
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 66396, size: 4096
I have assigned a GB of swap (ada0p3) of which only 1% is used, and also a GB of physical RAM to FBSD9.
Code:
# swapinfo
Device 1K-blocks Used Avail Capacity
/dev/ada0p3 1048540 12368 1036172 1%
Smartctl gives the folowing summary:
Code:
# /usr/local/sbin/smartctl -a /dev/ada0
smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, [url]http://smartmontools.sourceforge.net[/url]
=== START OF INFORMATION SECTION ===
Device Model: QEMU HARDDISK
Serial Number: QM00001
Firmware Version: 0.12.3
User Capacity: 21,474,836,480 bytes [21.4 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 published, ANSI NCITS 340-2000
Local Time is: Wed Mar 7 20:49:25 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 288) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0003 100 100 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 070 Pre-fail Always - 0
4 Start_Stop_Count 0x0002 100 100 020 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0003 100 100 054 Pre-fail Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
I am running FBSD9-amd64 under qemu-kvm
Hint to overcome this problem appreciated. Thanks!