Inserted a pci-usb 2.0 controller into the PC. pci-usb devices in the Freebsd system:
Device ehci1@pci0:5:0:2: not defined as ppt. When adding the parameter
I want to throw pci-usb 2.0 into guest Ubuntu. Please tell me what I'm doing wrong. I will provide the necessary commands conclusions.
# pciconf -lv | grep -B2 USB
Code:
xhci0@pci0:0:20:0: class=0x0c0330 card=0x50071458 chip=0x8c318086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB xHCI'
class = serial bus
subclass = USB
--
ehci0@pci0:0:26:0: class=0x0c0320 card=0x50061458 chip=0x8c2d8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
--
ehci2@pci0:0:29:0: class=0x0c0320 card=0x50061458 chip=0x8c268086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
--
uhci0@pci0:5:0:0: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x61 hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'VT82xx/62xx UHCI USB 1.1 Controller'
class = serial bus
subclass = USB
uhci1@pci0:5:0:1: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x61 hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'VT82xx/62xx UHCI USB 1.1 Controller'
class = serial bus
subclass = USB
ehci1@pci0:5:0:2: class=0x0c0320 card=0x31041106 chip=0x31041106 rev=0x63 hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'USB 2.0'
class = serial bus
subclass = USB
-s 7:0, passthru, 5/0/2
to the bhyve startup script, the script does not start!I want to throw pci-usb 2.0 into guest Ubuntu. Please tell me what I'm doing wrong. I will provide the necessary commands conclusions.
Last edited by a moderator: